[1] Yu G, Yu H J[M]. Integrated laser intelligent manufacturing(2002).

[2] Chen J H, Zheng Y, Liu X X et al. Analysis and research progress on pointing control of high power laser beam combination[J]. Navigation and Control, 21, 8-20(2022).

[3] Yang B L, Yang H, Wang P et al. LD pumped fiber laser based on self-developed fiber realizes 10 kW output[J]. Chinese Journal of Lasers, 49, 2016001(2022).

[4] Xiao H, Pan Z Y, Chen Z L et al. Stable output of 20 kW high beam quality laser based on self-developed optical fiber and device[J]. Chinese Journal of Lasers, 49, 1616002(2022).

[5] Wu H S, Li R X, Xiao H et al. Two-way cascade pumping partially doped fiber to achieve high beam quality laser output of nearly 8 kW[J]. Chinese Journal of Lasers, 49, 0716002(2022).

[6] Niu Y X, Wang Y F, Liu X et al. Laser beam quality factor M2 and its measurement[J]. Laser Technology, 23, 38-41(1999).

[7] Siegman A E. New developments in laser resonators[J]. Proceedings of SPIE, 1224, 2-14(1990).

[8] Mahajan V N. Strehl ratio for primary aberrations: some analytical results for circular and annular pupils[J]. Journal of the Optical Society of America A, 72, 1258-1266(1982).

[9] Tan B, Yang X Y. Study on the influence of alignment of cassegrain system on the propagation properties and beam control of high-power lasers[J]. Optics & Optoelectronic Technology, 19, 61-66(2021).

[10] Siegman A E. Analysis of laser beam quality degradation caused by quartic phase aberrations[J]. Applied Optics, 32, 5893-5901(1993).

[11] Meng L Q. Research on high-power fiber laser beam quality measurement technology based on four-wave transverse shear interference[D], 2-5(2020).

[12] Tao R M. Study of thermal-induced modal instabilities in high power narrow-linewidth fiber amplifiers with near diffraction-limited beam quality[D](2015).

[14] Sheikh M, Riza N A. Motion-free hybrid design laser beam propagation analyzer using a digital micromirror device and a variable focus liquid lens[J]. Applied Optics, 49, D6-D11(2010).

[15] Niederriter R D, Gopinath J T, Siemens M E. Measurement of the M2 beam propagation factor using a focus-tunable liquid lens[J]. Applied Optics, 52, 1591-1598(2013).

[16] Ji K H, Hou T R, Li J B et al. Fast measurement of the laser beam quality factor based on phase retrieval with a liquid lens[J]. Applied Optics, 58, 2765-2772(2019).

[17] Efron U[M]. Spatial light modulator technology: materials, devices, and applications(1995).

[18] Schulze C, Flamm D, Duparré M et al. Beam-quality measurements using a spatial light modulator[J]. Optics Letters, 37, 4687-4689(2012).

[19] Scaggs M, Haas G. Real time laser beam analysis system for high power lasers[J]. Proceedings of SPIE, 7913, 791306(2011).

[20] Cortés R, Villagómez R, Coello V et al. Laser beam quality factor (M2) measured by distorted Fresnel zone plates[J]. Revista Mexicana De Física, 54, 279-283(2008).

[21] Jorge K C, Riva R, Rodrigues N A S et al. Scattered light imaging method (SLIM) for characterization of arbitrary laser beam intensity profiles[J]. Applied Optics, 53, 4555-4564(2014).

[22] Huang L J, Guo S F, Leng J Y et al. Real-time mode decomposition for few-mode fiber based on numerical method[J]. Optics Express, 23, 4620-4629(2015).

[23] An Y, Huang L J, Li J et al. Learning to decompose the modes in few-mode fibers with deep convolutional neural network[J]. Optics Express, 27, 10127-10137(2019).

[24] Manuylovich E S, Dvoyrin V V, Turitsyn S K. Fast mode decomposition in few-mode fibers[J]. Nature Communications, 11, 1-9(2020).

[25] Paurisse M, Lévèque L, Hanna M et al. Complete measurement of fiber modal content by wavefront analysis[J]. Optics Express, 20, 4074-4084(2012).

[26] Lyu M, Lin Z Q, Li G W et al. Fast modal decomposition for optical fibers using digital holography[J]. Scientific Reports, 7, 1-9(2017).

[27] Li J B, Zhang X Y, Zheng Y H et al. Fast fiber mode decomposition with a lensless fiber-point-diffraction interferometer[J]. Optics Letters, 46, 2501-2504(2021).

[28] Gerchberg R. A practical algorithm for the determination of phase from image and diffraction plane pictures[J]. Optik, 35, 237-246(1972).

[29] Teague M R. Deterministic phase retrieval: a Green’s function solution[J]. Journal of the Optical Society of America A, 73, 1434-1441(1983).

[30] Neal D R, Gruetzner J K, Roller J P. Use of beam parameters in optical component testing[J]. Proceedings of SPIE, 4451, 394-405(2001).

[31] Du Y Z, Fu Y Q, Zheng L X. Complex amplitude reconstruction for dynamic beam quality M2 factor measurement with self-referencing interferometer wavefront sensor[J]. Applied Optics, 55, 10180-10186(2016).

[32] Han Z G, Meng L Q, Huang Z Q et al. Determination of the laser beam quality factor (M2) by stitching quadriwave lateral shearing interferograms with different exposures[J]. Applied Optics, 56, 7596-7603(2017).

[33] Zhao W L, Wei C L, Yuan C J et al. A flexible numerical calculation method of angular spectrum based on matrix product[J]. Optics Letters, 45, 5937-5940(2020).

[34] Zheng D H. Research on spatial phase-shifting interferometry and its key technologies[D], 17-19(2019).

[35] Ahearn T S, Staff R T, Redpath T W et al. The use of the Levenberg-Marquardt curve-fitting algorithm in pharmacokinetic modelling of DCE-MRI data[J]. Physics in Medicine and Biology, 50, N85-N92(2005).