[1] [1] Qin Lanyun, Wang Ting, Yang Guang, et al. Experimental study on laser deposition repair BT20 alloy component[J]. Infrared and Laser Engineering, 2014, 43(2): 404-410. (inChinese)

[2] [2] Yang Guang, Wang Xiangming, Wang Wei, et al. Microstructure and property of laser cladding TiC reinforced composition coating[J]. Infrared and Laser Engineering, 2014, 43(3): 796-799. (in Chinese)

[3] [3] Parisa Farahmand, Radovan Kovacevic. An experimental- numerical investigation of heat distribution and stress field in single- and multi-track laser cladding by a high-power direct diode laser[J]. Optics & Laser Technology, 2014, 63, 154-168.

[4] [4] Lin Xin, Cao Yongqing, Wu Xiaoyu, et al. Microstructure and mechanical properties of laser forming repaired 17-4PH stainless steel[J]. Materials and Engineering A, 2012, A553: 80-88.

[5] [5] Luo Fan, Yao Jianhua, Hu Xiaxia, et al. Effect of laser power on the cladding temperature field and the heat affected zone[J]. Journal of Iron and Steel Research, International, 2011, 18(1): 73-78.

[6] [6] Labudovic M, Hu D, Kovacevic R. A three dimension model for direct laser metal powder deposition and rapid prototyping[J]. Journal of Materials Science, 2003, 38(1): 35-49.

[7] [7] Lai Youbin, Liu Weijun, Kong Yuan, et al. Influencing factors of residual stress of Ti-6. 5Al-1Mo-1V-2Zr alloy by laser rapid forming process[J]. Rare Materials and Engineering, 2013, 42(2): 1526-1530. (in Chinese)

[8] [8] Kong Yuan, Liu Weijun, Wang Yuechao, et al. Numerical simulation of temperature field and stress field of direct laser metal deposition shaping process of titanium alloys[J]. Journal of Mechanical Engineering, 2011, 47(24): 74-82. (in Chinese)

[9] [9] Zhang Shuangyin, Lin Xin, Chen Jing, et al. Influence of heat treatment on residual stress of Ti-6Al-4V alloy by laser solid forming[J]. Rare Materials and Engineering, 2009, 38(5): 774-778. (in Chinese)

[10] [10] Bian Hongyou, Yang Guang, Li Ying, et al. Grouping parallel scan path generating method of metal laser deposition shaping[J]. Journal of Mechanical Engineering, 2013, 49(11): 171-176. (in Chinese)