[1] Li N, Liu W, Wang Y et al. Laser additive manufacturing on metal matrix composites: a review[J]. Chinese Journal of Mechanical Engineering, 34, 38(2021).

[2] Hua W J, Zhang J X. Defect and quality control of GH3536 super alloy fabricated via laser selective melting[J]. Laser & Optoelectronics Progress, 61, 0514008(2024).

[3] Jia H L, Sun H, Wang H Z et al. Scanning strategy in selective laser melting (SLM): a review[J]. The International Journal of Advanced Manufacturing Technology, 113, 2413-2435(2021).

[4] Dejene N D, Lemu H G. Current status and challenges of powder bed fusion-based metal additive manufacturing: literature review[J]. Metals, 13, 424(2023).

[5] Hu W N, Feng Y, Wang D et al. Method and process of selective laser melting forming low-angle support-free structures (invited)[J]. Chinese Journal of Lasers, 51, 0402303(2024).

[6] He Y W, Chen J, Yang Q et al. Optimization of process parameters and performances of invar-alloy lattice structures manufactured via selective laser melting[J]. Laser & Optoelectronics Progress, 61, 1714001(2024).

[7] Bian P Y, Wang C C, Xu K W et al. Coupling analysis on microstructure and residual stress in selective laser melting (SLM) with varying key process parameters[J]. Materials, 15, 1658(2022).

[8] Yao S G, Dong Y H, Li X L et al. Causes of defects in selective laser melting of AlSi10Mg[J]. Chinese Journal of Lasers, 51, 1602307(2024).

[9] Yuan W H, Chen H, Wei Q S. The role of recoil pressure in thermodynamic behaviors of molten pool during selective laser melting[J]. Journal of Mechanical Engineering, 56, 213-219(2020).

[10] Wang L, Guo K, Cong J Q et al. Effect of process parameters on defect in selective laser melting of 316L stainless steel[J]. Laser & Optoelectronics Progress, 60, 0514007(2023).

[11] Guo S, Li J, Zhang H Y et al. Balling behavior of phenolic resin during selective laser sintering process[J]. Materials Letters, 365, 136447(2024).

[12] Yang X H, Zhang Z Y, Wang S. Simulation of thermal behavior of selective laser melting high strength aluminum alloy[J]. Laser & Optoelectronics Progress, 59, 2314003(2022).

[13] Zhou J T, Han X, Li H et al. Investigation of layer-by-layer laser remelting to improve surface quality, microstructure, and mechanical properties of laser powder bed fused AlSi10Mg alloy[J]. Materials & Design, 210, 110092(2021).

[14] Yuan W H, Chen H, Cheng T et al. Effects of laser scanning speeds on different states of the molten pool during selective laser melting: simulation and experiment[J]. Materials & Design, 189, 108542(2020).

[15] An X L, Wang Y L, Jiang F L et al. Influence of lap ratio on temperature field and residual stress distribution of 42CrMo laser cladding[J]. Chinese Journal of Lasers, 48, 1002110(2021).

[16] Saghaian S E, Nematollahi M, Toker G et al. Effect of hatch spacing and laser power on microstructure, texture, and thermomechanical properties of laser powder bed fusion (L-PBF) additively manufactured NiTi[J]. Optics & Laser Technology, 149, 107680(2022).

[17] Tang P M, Wang S, Duan H M et al. The formation of humps and ripples during selective laser melting of 316L stainless steel[J]. JOM, 72, 1128-1137(2020).

[18] Tseng C C, Li C J. Numerical investigation of interfacial dynamics for the melt pool of Ti-6Al-4V powders under a selective laser[J]. International Journal of Heat and Mass Transfer, 134, 906-919(2019).

[19] Tang P M, Xie H Q, Wang S et al. Numerical analysis of molten pool behavior and spatter formation with evaporation during selective laser melting of 316L stainless steel[J]. Metallurgical and Materials Transactions B, 50, 2273-2283(2019).

[20] Ye W L, Zhang S S, Mendez L L et al. Numerical simulation of the melting and alloying processes of elemental titanium and boron powders using selective laser alloying[J]. Journal of Manufacturing Processes, 64, 1235-1247(2021).

[21] Cao L. Mesoscopic-scale simulation of pore evolution during laser powder bed fusion process[J]. Computational Materials Science, 179, 109686(2020).

[22] Wei P, Wei Z Y, Chen Z et al. Numerical simulation and parametric analysis of selective laser melting process of AlSi10Mg powder[J]. Applied Physics A, 123, 540(2017).

[23] Wei P, Wei Z Y, Chen Z et al. Thermal behavior in single track during selective laser melting of AlSi10Mg powder[J]. Applied Physics A, 123, 604(2017).

[24] Zhu J, Hua Y T, He Q S et al. Research progress of laser remelting technology in selective laser melting[J]. Rare Metal Materials and Engineering, 52, 1932-1942(2023).

[25] Khairallah S A, Anderson A T, Rubenchik A et al. Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones[J]. Acta Materialia, 108, 36-45(2016).

[26] Qu M L, Guo Q L, Escano L I et al. Controlling process instability for defect lean metal additive manufacturing[J]. Nature Communications, 13, 1079(2022).