[1] [1] Shelby R A, Smith D R and Schultz S 2001 Experimental verification of a negative index of refraction Science292 77–79

[2] [2] Clausen A, Wang F W, Jensen J S, Sigmund O and Lewis J A 2015 Topology optimized architectures with programmable Poisson's ratio over large deformations Adv. Mater.27 5523–7

[3] [3] Liu J X, Yan D J and Zhang Y H 2021 Mechanics of unusual soft network materials with rotatable structural nodes J. Mech. Phys. Solids146 104210

[4] [4] Mei T, Meng Z Q, Zhao K J and Chen C Q 2021 A mechanical metamaterial with reprogrammable logical functions Nat. Commun.12 7234

[5] [5] Meza L R, Zelhofer A J, Clarke N, Mateos A J, Kochmann D M and Greer J R 2015 Resilient 3D hierarchical architected metamaterials Proc. Natl Acad. Sci. USA112 11502–7

[6] [6] Berger J B, Wadley H N G and McMeeking R M 2017 Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness Nature543 533–7

[7] [7] Coulais C, Sounas D and Al A 2017 Static non-reciprocity in mechanical metamaterials Nature542 461–4

[8] [8] Zheng X Y et al 2014 Ultralight, ultrastiff mechanical metamaterials Science344 1373–7

[9] [9] Tan C L, Deng C, Li S, Abena A, Jamshidi P, Essa K, Wu L K, Xu G H, Attallah M M and Liu J 2022 Mechanical property and biological behaviour of additive manufactured TiNi functionally graded lattice structure Int. J. Extrem. Manuf.4 045003

[10] [10] Zhang W Q, Ye H T, Feng X B, Zhou W Z, Cao K, Li M Y, Fan S F and Lu Y 2022 Tailoring mechanical properties of PSL 3D-printed structures via size effect Int. J. Extrem. Manuf.4 045201

[11] [11] Huang Y H et al 2023 A direct laser-synthesized magnetic metamaterial for low-frequency wideband passive microwave absorption Int. J. Extrem. Manuf.5 035503

[12] [12] Li X, Peng W T, Wu W W, Xiong J and Lu Y 2023 Auxetic mechanical metamaterials: from soft to stiff Int. J. Extrem. Manuf.5 042003

[13] [13] Xu R, Chen C Q, Sun J P, He Y L, Li X, Lu M H and Chen Y F 2023 The design, manufacture and application of multistable mechanical metamaterials-a state-of-the-art review Int. J. Extrem. Manuf.5 042013

[14] [14] Frenzel T, Kadic M and Wegener M 2017 Three-dimensional mechanical metamaterials with a twist Science358 1072–4

[15] [15] Tao R, Ji L T, Li Y, Wan Z S, Hu W X, Wu W W, Liao B B, Ma L H and Fang D N 2020 4D printed origami metamaterials with tunable compression twist behavior and stress-strain curves Composites B 201 108344

[16] [16] Xin X Z, Liu L W, Liu Y J and Leng J S 2022 4D pixel mechanical metamaterials with programmable and reconfigurable properties Adv. Funct. Mater.32 2107795

[17] [17] Librandi G, Tubaldi E and Bertoldi K 2021 Programming nonreciprocity and reversibility in multistable mechanical metamaterials Nat. Commun.12 3454

[18] [18] Melancon D, Gorissen B, Garca-Mora C J, Hoberman C and Bertoldi K 2021 Multistable inflatable origami structures at the metre scale Nature592 545–50

[19] [19] Pan F, Li Y L, Li Z Y, Yang J L, Liu B and Chen Y L 2019 3D pixel mechanical metamaterials Adv. Mater.31 1900548

[20] [20] Chen T, Pauly M and Reis P M 2021 A reprogrammable mechanical metamaterial with stable memory Nature589 386–90

[21] [21] Coulais C, Teomy E, de Reus K, Shokef Y and van Hecke M 2016 Combinatorial design of textured mechanical metamaterials Nature535 529–32

[22] [22] Silverberg J L, Evans A A, McLeod L, Hayward R C, Hull T, Santangelo C D and Cohen I 2014 Using origami design principles to fold reprogrammable mechanical metamaterials Science345 647–50

[23] [23] Zhang H, Wu J, Fang D N and Zhang Y H 2021 Hierarchical mechanical metamaterials built with scalable tristable elements for ternary logic operation and amplitude modulation Sci. Adv.7 eabf1966

[24] [24] Yan D J, Chang J H, Zhang H, Liu J X, Song H L, Xue Z G, Zhang F and Zhang Y H 2020 Soft three-dimensional network materials with rational bio-mimetic designs Nat. Commun.11 1180

[25] [25] Yang C, Boorugu M, Dopp A, Ren J, Martin R, Han D, Choi W and Lee H 2019 4D printing reconfigurable, deployable and mechanically tunable metamaterials Mater. Horiz.6 1244–50

[26] [26] Xin X Z, Liu L W, Liu Y J and Leng J S 2020 4D printing auxetic metamaterials with tunable, programmable, and reconfigurable mechanical properties Adv. Funct. Mater.30 2004226

[27] [27] Hamzehei R, Serjouei A, Wu N, Zolfagharian A and Bodaghi M 2022 4D metamaterials with zero Poisson's ratio, shape recovery, and energy absorption features Adv. Eng. Mater.24 2200656

[28] [28] Wu J, Yao S L, Zhang H, Man W T, Bai Z L, Zhang F, Wang X M, Fang D N and Zhang Y H 2021 Liquid crystal elastomer metamaterials with giant biaxial thermal shrinkage for enhancing skin regeneration Adv. Mater.33 2106175

[29] [29] Lendlein A and Gould O E C 2019 Reprogrammable recovery and actuation behaviour of shape-memory polymers Nat. Rev. Mater.4 116–33

[30] [30] van Manen T, Janbaz S, Jansen K M B and Zadpoor A A 2021 4D printing of reconfigurable metamaterials and devices Commun. Mater.2 56

[31] [31] Zhang B et al 2021 Mechanically robust and UV-curable shape-memory polymers for digital light processing based 4D printing Adv. Mater.33 2101298

[32] [32] Xia Y L, He Y, Zhang F H, Liu Y J and Leng J S 2021 A review of shape memory polymers and composites: mechanisms, materials, and applications Adv. Mater.33 2000713

[33] [33] Zhao Q, Qi H J and Xie T 2015 Recent progress in shape memory polymer: new behavior, enabling materials, and mechanistic understanding Prog. Polym. Sci.49–50 79–120

[34] [34] Gu J P, Zhang X P, Duan H, Wan M Q and Sun H Y 2021 A hygro-thermo-mechanical constitutive model for shape memory polymers filled with nano-carbon powder Int. J. Smart Nano Mater.12 286–306

[35] [35] Zhang W et al 2021 Structural multi-colour invisible inks with submicron 4D printing of shape memory polymers Nat. Commun.12 112

[36] [36] Lin C, Lv J X, Li Y S, Zhang F H, Li J R, Liu Y J, Liu L W and Leng J S 2019 4D-printed biodegradable and remotely controllable shape memory occlusion devices Adv. Funct. Mater.29 1906569

[37] [37] Lee S, Bang D, Park J O and Choi E 2022 Programmed shape-morphing material using single-layer 4D printing system Micromachines13 243

[38] [38] Kuang X, Roach D J, Wu J T, Hamel C M, Ding Z, Wang T J, Dunn M L and Qi H J 2019 Advances in 4D printing: materials and applications Adv. Funct. Mater.29 1805290

[39] [39] Fu P et al 2022 4D printing of polymers: techniques, materials, and prospects Prog. Polym. Sci.126 101506

[40] [40] Lee A Y, An J and Chua C K 2017 Two-way 4D printing: a review on the reversibility of 3D-printed shape memory materials Engineering3 663–74

[41] [41] Rafiee M, Farahani R D and Therriault D 2020 Multi-material 3D and 4D printing: a survey Adv. Sci.7 1902307

[42] [42] Zhou X L, Ren L Q, Song Z Y, Li G W, Zhang J F, Li B Q, Wu Q, Li W X, Ren L and Liu Q P 2023 Advances in 3D/4D printing of mechanical metamaterials: from manufacturing to applications Composites B 254 110585

[43] [43] Xu P L, Lan X, Zeng C J, Zhang X D, Zhao H X, Leng J S and Liu Y J 2024 Compression behavior of 4D printed metamaterials with various Poisson's ratios Int. J. Mech. Sci.264 108819

[44] [44] El Helou C, Buskohl P R, Tabor C E and Harne R L 2021 Digital logic gates in soft, conductive mechanical metamaterials Nat. Commun.12 1633