[1] [1] PRAWER S, GREENTREE A D. Diamond for quantum computing［J］. Science, 2008, 320(5883): 1601-1602.

[2] [2] UMEZAWA H, IKEDA K, KUMARESAN R, et al. Increase in reverse operation limit by barrier height control of diamond Schottky barrier diode［J］. IEEE Electron Device Letters, 2009, 30(9): 960-962.

[4] [4] YAMADA H, CHAYAHARA A, MOKUNO Y, et al. Developments of elemental technologies to produce inch-size single-crystal diamond wafers［J］. Diamond and Related Materials, 2011, 20(4): 616-619.

[5] [5] ACHARD J, TALLAIRE A, MILLE V, et al. Improvement of dislocation density in thick CVD single crystal diamond films by coupling H2/O2 plasma etching and chemo-mechanical or ICP treatment of HPHT substrates［J］. Physica Status Solidi(a), 2014, 211(10): 2264-2267.

[6] [6] GAUKROGER M P, MARTINEAU P M, CROWDER M J, et al. X-ray topography studies of dislocations in single crystal CVD diamond［J］. Diamond and Related materials, 2008, 17(3): 262-269.

[7] [7] SILVA F, BONNIN X, ACHARD J, et al. Geometric modeling of homoepitaxial CVD diamond growth: I. The {1 0 0}{1 1 1}{1 1 0}{1 1 3} system［J］. Journal of crystal Growth, 2008, 310(1): 187-203.

[9] [9] MOKUNO Y, CHAYAHARA A, SODA Y, et al. High rate homoepitaxial growth of diamond by microwave plasma CVD with nitrogen addition［J］. Diamond and Related Materials, 2006, 15(4-8): 455-459.

[13] [13] KLEIN C A, CARDINALE G F. Young's modulus and Poisson's ratio of CVD diamond［J］. Diamond & Related Materials, 1992, 2(5/6/7): 918-923.

[14] [14] SATO T, OHASHI K, SUDOH T, et al. Thermal expansion of a high purity synthetic diamond single crystal at low temperatures［J］. Physical Review B, 2002, 65(9): 092102.

[15] [15] PALANCHER H, KACHNAOUI R, MARTIN G, et al. Strain relaxation in He implanted UO2 polycrystals under thermal treatment: an in situ XRD study［J］. Journal of Nuclear Materials, 2016, 476: 63-76.

[16] [16] EATON-MAGAA S, ARDON T. Spatial distribution of defects in natural type IIb diamond after irradiation and annealing［J］. Diamond and Related Materials, 2020: 109-119.

[17] [17] MASUYA S, HANADA K, OSHIMA T, et al. Formation of stacking fault and dislocation behavior during the high-temperature annealing of single-crystal HPHT diamond［J］. Diamond & Related Materials, 2017, 75: 155-160.

[18] [18] KAZUCHITS N M, RUSETSKY M S, KAZUCHITS V N， et al. Comparison of HPHT and LPHT annealing of Ib synthetic diamond［J］. Diamond and Related Materials, 2019, 91: 156-164.

[19] [19] SLACK G A, BARTRAM S F. Thermal expansion of some diamondlike crystals［J］. Journal of Applied Physics, 1975, 46(1): 89-98.

[20] [20] QADRI S B, KIM C, SKELTON E F, et al. Thermal expansion of chemical vapor deposition grown diamond films［J］. Thin Solid Films, 1993, 236(1/2): 103-105.

[21] [21] LIANG Z, JIA X, MA H A, et al. Synthesis of HPHT diamond containing high concentrations of nitrogen impurities using NaN3 as dopant in metal-carbon system［J］. Diamond & Related Materials, 2005, 14(11/12): 1932-1935.

[22] [22] ANTHONY T R. Stresses generated by impurities in diamond［J］. Diamond & Related Materials, 1995, 4(12): 1346-1352.

[23] [23] KHOKHRYAKOV A F, PALYANOV Y N, KUPRIYANOV I N, et al. Effect of nitrogen impurity on the dislocation structure of large HPHT synthetic diamond crystals［J］. Journal of Crystal Growth, 2014, 386(15): 162-167.

[24] [24] SUROVTSEV N V, KUPRIYANOV I N, MALINOVSKY V K, et al. Effect of nitrogen impurities on the Raman line width in diamonds［J］. Journal of Physics: Condensed Matter, 1999, 11(24): 4767-4774.