[1] Pham D T, Gault R S. A comparison of rapid prototyping technologies[J]. International Journal of Machine Tools & Manufacture, 38, 1257-1287(1998). http://www.sciencedirect.com/science/article/pii/S0890695597001375

[2] Zhai J H, Wang Q B, Wei X H et al. Repair of scraper conveyor sprocket based on metal 3D printing[J]. Chinese Journal of Lasers, 44, 0402007(2017).

[3] Bo F X, He B, Zong X M. Selective laser sintering process of coated sands[J]. Laser & Optoelectronics Progress, 54, 091405(2017).

[4] Zhang S, Xu Y S, Sun S S et al. A review on the progress of 3D printing materials[J]. China Plastics, 30, 7-14(2016).

[5] Ren J W, Liu J S[J]. Research progress on the major materials by selective laser sintering Machinery Design & Manufacture, 2010, 266-268.

[6] Schmid M, Amsdo A, Wegener K. Materials perspective of polymers for additive manufacturing with selective laser sintering[J]. Journal of Materials Research, 29, 1824-1832(2014). http://adsabs.harvard.edu/abs/2014JMatR..29.1824S

[7] Schmid M, Kleijnen R, Vetterli M et al. Influence of the origin of polyamide 12 powder on the laser sintering process and laser sintered parts[J]. Applied Sciences, 7, 462(2017). http://www.researchgate.net/publication/316639365_Influence_of_the_Origin_of_Polyamide_12_Powder_on_the_Laser_Sintering_Process_and_Laser_Sintered_Parts

[8] Zhang J, Adams A. Understanding thermal aging of non-stabilized and stabilized polyamide 12 using 1H solid-state NMR[J]. Polymer Degradation & Stability, 134, 169-178(2016). http://www.researchgate.net/publication/309183866_Understanding_thermal_aging_of_non-stabilized_and_stabilized_polyamide_12_using_1H_solid-state_NMR

[9] Haerst M J, Wolf R, Schönberger M et al. Ageing processes in laser sintered and injection moulded PA12 following hygienic reprocessing[J]. Rapid Prototyping Journal, 21, 279-286(2015). http://www.emeraldinsight.com/doi/full/10.1108/RPJ-06-2013-0061

[10] Dotchev K, Wan Y. Recycling of polyamide 12 based powders in the laser sintering process[J]. Rapid Prototyping Journal, 15, 192-203(2009). http://www.emeraldinsight.com/doi/full/10.1108/13552540910960299

[11] Cai C, Yi G B, Chen X D. The development of study on nylon ageing mechanism[J]. Synthetic Materials Aging and Application, 42, 42-47(2013).

[12] Wudy K, Drummer D, Kühnlein F et al. Influence of degradation behavior of polyamide 12 powders in laser sintering process on produced parts[J]. Journal of Cell Science, 1593, 691-695(2014). http://scitation.aip.org/content/aip/proceeding/aipcp/10.1063/1.4873873

[13] Pham D T, Dotchev K D. Yusoff W A Y. Deterioration of polyamide powder properties in the laser sintering process[J]. Journal of Mechanical Engineering Science, 222, 2163-2176(2008). http://www.researchgate.net/publication/245387699_Deterioration_of_polyamide_powder_properties_in_the_laser_sintering_process

[14] Kuehnlein F, Drummer D, Rietzel D et al. Degradation behavior and material properties of PA12-plastic powders processed by powder based additive manufacturing technologies. [C]∥Annals of DAAAM & Proceedings. Vienna: DAAAM International(2010).

[15] Dadbakhsh S, Verbelen L, Verkinderen O et al. Effect of PA12 powder reuse on coalescence behaviour and microstructure of SLS parts[J]. European Polymer Journal, 92, 250-262(2017). http://www.sciencedirect.com/science/article/pii/S0014305716316615

[16] Caulfield B, Mchugh P E, Lohfeld S. Dependence of mechanical properties of polyamide components on build parameters in the SLS process[J]. Journal of Materials Processing Technology, 182, 477-488(2007). http://www.sciencedirect.com/science/article/pii/S0924013606007886

[17] Hofland E C, Baran I, Wismeijer D A et al[J]. Correlation of process parameters with mechanical properties of laser sintered PA12 parts Advances in Materials Science and Engineering, 2017, 4953173.

[18] Zarringhalam H, Hopkinson N, Kamperman N F et al. Effects of processing on microstructure and properties of SLS nylon 12[J]. Materials Science & Engineering A, 435, 172-180(2006). http://www.sciencedirect.com/science/article/pii/S092150930601478X

[19] Drummer D, Wudy K, Drexler M. Influence of energy input on degradation behavior of plastic components manufactured by selective laser melting[J]. Physics Procedia, 56, 176-183(2014). http://www.sciencedirect.com/science/article/pii/S1875389214003058