[1] [1] Feng Shurong, Zhang Shuquan, Wang Huaming. Wear resistance of laser clad hard particles reinforced intermetallic composite coating on TA15 alloy[J]. Chinese J Lasers, 2012, 39(2): 0203002.

[2] [2] Chen Xiao, Huang Shuowen, Duan Xiaohua, et al. Preparation and properties of TiB2 -50% Co anti-corrosion and wear resistant coating[J]. Transactions of Material and Heat Treatment, 2014, 35(11): 174-179.

[3] [3] Cui Zeqin, Wang Wenxian, Wu Hongliang, et al. Microstructure and wear resistance of AZ31B magnesium alloy by laser cladding with Al-Si/Al2O3-TiO2 powders[J]. Chinese J Lasers, 2011, 38(6): 0603020.

[4] [4] Zhou C, Zhang Z, Hong T, et al. Study of protection from cracks in laser cladding of metal-ceramic composite coating[C]. SPIE, 1996, 27(1): 259-264.

[5] [5] Wu Dongjiang, Chu Yang, Niu Fangyong, et al. Influence of temperature distribution of ceramic coating using top-hat assistant laser beam in dual-beam laser cladding[J]. Chinese J Lasers, 2014, 41(7): 0703012.

[6] [6] Farahmand P, Liu S, Zhang Z, et al. Laser cladding assisted by induction heating of Ni-WC composite enhanced by nano-WC and La2O3[J]. Ceramics International, 2014, 40(10): 15421-15438.

[7] [7] Schmidt T, Grtner F, Assadi H, et al. Development of a generalized parameter window for cold spray deposition[J]. Acta Materialia, 2006, 54(3): 729-742.

[8] [8] Wang Hongtao, Chen Xiao, Ji Gangchang, et al. Preparation of WC/FeAl intermetallic compound based cermet coating by cold spraying[J]. Heat Treatment of Metals, 2013, 38(3): 70-73.

[9] [9] Pialago E J T, Kwon O K, Chan W P. Cold spray deposition of mechanically alloyed ternary Cu-CNT-SiC composite powders[J]. Ceramics International, 2015, 41(5): 6764-6775.

[10] [10] Dosta S, Couto M,Guilemany J M. Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates[J]. Acta Materialia, 2013, 61(2): 643-652.

[11] [11] Cui Lang, Ma Bing, Feng Shengqiang, et al. Progress in preparation of ceramic coating and ceramic-metal composite coating by cold spraying[J]. Ordnance Material Science and Engineering, 2015, 38(1): 115-120.

[12] [12] Bray M, Cockburn A, O′Neill W. Thelaser-assisted cold spray process and deposit characterisation[J]. Surface and Coatings Technology, 2009, 203(19): 2851-2857.

[13] [13] Li B, Yang L J, Li Z H, et al. Beneficial effects of synchronous laser irradiation on the characteristics of cold-sprayed copper coatings[J]. Journal of Thermal Spray Technology, 2015, 24(5): 836-847.

[14] [14] Yao J, Li Z, Li B, et al. Characteristics and bonding behavior of Stellite 6 alloy coating processed with supersonic laser deposition[J]. Journal of Alloys and Compounds, 2015, 661: 526-534.

[15] [15] Konrad C, Zhang Y, Xiao B. Analysis of melting and resolidification in a two-component metal powder bed subjected to temporal Gaussian heat flux[J]. International Journal of Heat and Mass Transfer, 2005, 48(19): 3932-3944.

[16] [16] Dai Donghua, Gu Dongdong, Li Yali, et al. Numerical simulation of metallurgical behavior of melt pool during selective laser melting of W-Cu composite powder system[J]. Chinese J Lasers, 2013, 40(11): 1103001.

[17] [17] Xu Chengwei, Wang Zhenquan, Hu Xin, et al. Research on microstructure and property of laser cladding layer on 1Crl7Ni2 stainless steel[J]. Surface Technology, 2011, 40(1): 11-13.

[18] [18] Yang Lijing, Li Zhihong, Li Bo, et al. Microstructure and deposition mechanism of Ni60 coatings prepared by supersonic laser deposition[J]. Chinese J Lasers, 2015, 42(3): 0306005.

[19] [19] Li Zhihong, Yang Lijing, Li Bo, et al. Microstructural characteristics of WC/Stellite 6 composite coating prepared by supersonic laser deposition[J]. Chinese J Lasers, 2015, 42(11): 1106002.

[20] [20] Yang Jiaoxi, Wang Zhiyong, Zuo Tiechuan. High power diode laser cladding aggregate tungsten carbide-Ni based superhard composites[J]. Chinese J Lasers, 2009, 36(12): 3262-3266.