[1] [1] FU A, LI S Sh, ZHOU K, et al. MAG welding process study on T-joint of T4003 ferritic stainless steel［J］. Welding Digest of Machinery Manufacturing, 2020(1): 13-17(in Chinese).

[2] [2] LIAN X J, LIU Y, FAN G W, et al. Microstructure transformation behavior of high strength economical stainless steel welding heat affected zone［J］. Hot Working Technology, 2021, 50(21): 29-32(in Chinese).

[3] [3] OKAYASU M, SHIGEOKA T. Effect of microstructural characteristics on mechanical properties of ferritic stainless steel［J］. Journal of Materials Engineering and Performance, 2019, 28(11): 6771-6778.

[4] [4] ZHANG Y R, LIU Y. Microstructure and impact toughness of welding HAZ in ferritic stainless steel［J］.Hot Working Technology,2023,52(1): 144-146(in Chinese).

[5] [5] XIANG D Y, XIAO L R, SHAO D D, et al. Effect of heat input on microstructure and properties of T4003 stainless steel MAG welded joint［J］. Welding Digest of Machinery Manufacturing, 2019(6): 31-36(in Chinese).

[6] [6] DONG Zh H, LI Y W, LEE B Y, et al. Research status of welding technology of ferritic stainless steel［J］. The International Journal of Advanced Manufacturing Technology, 2022, 118(9/10): 2805-2831.

[7] [7] ZHOU X Y, ZHANG J Y, LIU Z G, et al. Study on the parameter optimization of laser welding of SUS301L stainless steel for metro roof［J］. Laser Technology, 2021, 45(5): 590-595(in Chinese).

[8] [8] MENG Y F, YE B, ZHAO D, et al. Research on fiber laser welding of 430 ferritic stainless steel band［J］. Applied Laser,2017, 37(1): 79-84(in Chinese).

[9] [9] GAO J, CHEN Sh M, WANG K H, et al. Research on the influence of laser power on laser-MIG hybrid weld forming［J］. Laser Technology, 2020, 44(2): 178-182(in Chinese).

[10] [10] HAN L M, CAI D T, ZHANG Y P, et al. Comparative study on MIG, laser and laser-MIG hybrid welding process of 304 stainless steel［J］. Hot Working Technology, 2019, 48(1): 72-77(in Chinese).

[11] [11] HAO K D, ZHANG Ch, ZENG X Y, et al. Effect of heat input on weld microstructure and toughness of laser-arc hybrid welding of martensitic stainless steel［J］. Journal of Materials Processing Technology, 2017, 245: 7-14.

[12] [12] HAO K D, GONG M Ch, PI Y M, et al. Effect of Ni content on rolling toughness of laser-arc hybrid welded martensitic stainless steel［J］. Journal of Materials Processing Technology, 2018, 251: 127-137.

[13] [13] ZHANG Ch, LIU Sh Y, ZHANG F L, et al. Effect of defocus on droplet transfer characteristics of high strength steel by laser welding with fill wire［J］. Laser Technology, 2019, 43(3): 380-386(in Chinese).

[14] [14] MOUSAZADEH M A, DERAKHSHANDEH-HAGHIGHI R. Autogenous tungsten inert gas welding of 430 ferritic stainless steel: The effect of inter-pass temperature on microstructure evolution and mechanical properties［J］. Journal of Materials Engineering and Performance, 2020, 29(12): 7807-7820.

[15] [15] HE X, LIU Y J, GUO Zh Y. Study on low temperature toughness of Q345C steel［J］. Hot Working Technology, 2018, 47(22): 46-48(in Chinese).

[16] [16] ZHENG H B, YEM X N, WANG B S, et al. Study on microstructure and toughness of welded joint of 12％Cr ferritic stainless steel［J］. Journal of Iron and Steel Research, 2010, 22(11): 28-33(in Chinese).

[17] [17] ZHANG Z Z, WU C S. Monte Carlo simulation of grain growth in heat-affected zone of 12wt% Cr ferritic stainless steel hybrid welds［J］. Computational Materials Science, 2012, 65: 442-449.

[18] [18] WU C S, ZHANG H T, CHEN J. Numerical simulation of keyhole behaviors and fluid dynamics in laser-gas metal arc hybrid welding of ferrite stainless steel plates［J］. Journal of Manufacturing Processes, 2017, 25: 235-245.

[19] [19] ZHANG Zh H, WANG Zh B, WANG W X, et al. Microstructure evolution in heat affected zone of T4003 ferritic stainless steel［J］. Materials & Design, 2015, 68: 114-120.

[20] [20] ZHANG Zh H. Study on microstructure and properties of heat affected zone of T4003 ferritic［D］. Taiyuan: Taiyuan University of Technology, 2015:51-52(in Chinese).