[1] Ma G Y, Wang J T, Niu F Y et al. Influence of powder distribution on the Al2O3 thin-wall ceramic formed by laser engineered net shaping[J]. Chinese Journal of Lasers, 42, 0103006(2015).

[2] Wu D J, Lu W F, Chen Y X et al. Experimental study on ceramic of ZrO2-13%Al2O3 by laser engineered net shaping[J]. Chinese Journal of Lasers, 39, 0703004(2012).

[3] Shi T, Wang Y Q, Lu B H et al. Laser cladding forming of cantilevered thin-walled part based on hollow-laser beam inside powder feeding technology[J]. Chinese Journal of Lasers, 42, 1003003(2015).

[4] Wang X Y, Guo H R, Xu W J et al[J]. Laser cladding forming of a ramp thin wall with variable powder feed rate China Mechanical Engineering, 2011, 701-705.

[5] Hu B Y, Zhang H O, Jiang J et al[J]. Layered-deposition manufacturing complex metal parts by unequal thickness slicing Journal of Huazhong University of Science and Technology (Natural Science Edition), 2011, 57-60.

[6] Shi G L, Shi S H, Zhang J. The influence of defocusing amount of hollow beam on the quality of single cladding channel[J]. Applied Laser, 32, 505-509(2012).

[7] Hua Y, Choi J. Adaptive direct metal/material deposition process using a fuzzy logic-based controller[J]. Journal of Laser Applications, 17, 200-210(2005). http://scitation.aip.org/content/lia/journal/jla/17/4/10.2351/1.2098811

[8] Fathi A, Khajepour A, Toyserkani E et al. Clad height control in laser solid freeform fabrication using a feedforward PID controller[J]. The International Journal of Advanced Manufacturing Technology, 35, 280-292(2007). http://link.springer.com/article/10.1007/s00170-006-0721-1

[9] Sun C F, Shi S H, Fu G Y et al. On-line monitoring and control based on CCD laser cladding forming process[J]. Applied Laser, 33, 68-71(2013).

[10] Shi S H, Wang T. -08-13[P]. Sun C F. A measuring device, its measuring method of molten pool defocusing amount during laser cladding process: CN201410235777.6.(2014).

[11] Wang Y Q, Shi T, Lu B H et al. -04-14[P]. closed-loop control strategy in laser cladding forming: CN201510176039.3.(2015).

[12] Shi T, Lu B H, Wei Z Y et al. Research of closed-loop control of deposition height in laser metal deposition[J]. Chinese Journal of Lasers, 44, 0702004(2017).

[13] Meng W D, Shi S H, Fu G Y et al. Experimental study about vertical surface accumulation with coaxial inside-beam powder feeding[J]. Laser Technology, 39, 594-597(2015).

[14] Shi T, Lu B H, Shi S H et al. Laser metal deposition with spatial variable orientation based on hollow-laser beam with internal powder feeding technology[J]. Optics & Laser Technology, 88, 234-241(2017). http://www.sciencedirect.com/science/article/pii/S0030399216304029

[15] Deng Z Q, Shi S H, Zhou B et al. Laser cladding forming of unequal-height curved arc-shaped thin-wall structure[J]. Chinese Journal of Lasers, 44, 0902005(2017).

[16] Shi G L, Shi S H, Wang C. Research on melt-path forming based on internal powder feeding through a hollow laser beam[J]. Applied Laser, 33, 385-390(2013).

[17] Wang C, Shi S H, Fang Q Q et al. Research on laser cladding forming of close-packed multivariant twisty thin-wall parts[J]. Chinese Journal of Lasers, 44, 0602004(2017).

[18] Shi T, Lu B H, Wei Z Y et al. -12-14(2016).