[9] [9] PAPADOPOULOS M P, APOSTOLOPOULOS C A, ZERVAKI A D, et al. Corrosion of exposed rebars, associated mechanical degradation and correlation with accelerated corrosion tests[J]. Construction and Building Materials, 2011, 25(8): 3367-3374.

[18] [18] TRIANA V, LIZARAZO-MARRIAGA J, FLREZ J O. Steel corrosion assessment by electrochemical impedance on metakaolin blended mortars[J]. Materials Research, 2013, 16(6): 1457-1464.

[24] [24] SOHAIL M G, LAURENS S, DEBY F, et al. Significance of macrocell corrosion of reinforcing steel in partially carbonated concrete: numerical and experimental investigation[J]. Materials and Structures, 2015, 48(1): 217-233.

[29] [29] MAK M W T, DESNERCK P, LEES J M. Corrosion-induced cracking and bond strength in reinforced concrete[J]. Construction and Building Materials, 2019, 208: 228-241.

[40] [40] FU C Q, JIN N G, YE H L, et al. Non-uniform corrosion of steel in mortar induced by impressed current method: an experimental and numerical investigation[J]. Construction and Building Materials, 2018, 183: 429-438.

[45] [45] CHEN J W, FU C Q, YE H L, et al. Corrosion of steel embedded in mortar and concrete under different electrolytic accelerated corrosion methods[J]. Construction and Building Materials, 2020, 241: 117971.

[48] [48] EL MAADDAWY T A, SOUDKI K A. Effectiveness of impressed current technique to simulate corrosion of steel reinforcement in concrete[J]. Journal of Materials in Civil Engineering, 2003, 15(1): 41-47.

[49] [49] TESIC K, BARICEVIC A, SERDAR M, et al. Characterization of ground penetrating radar signal during simulated corrosion of concrete reinforcement[J]. Automation in Construction, 2022, 143: 104548.

[52] [52] ALONSO C, ANDRADE C, RODRIGUEZ J, et al. Factors controlling cracking of concrete affected by reinforcement corrosion[J]. Materials and Structures, 1998, 31(7): 435-441.

[53] [53] NOSSONI G, HARICHANDRAN R. Current efficiency in accelerated corrosion testing of concrete[J]. Corrosion, 2012, 68(9): 801-809.

[54] [54] MASLEHUDDIN M, AL-ZAHRANI M M, AL-DULAIJAN S U, et al. Effect of steel manufacturing process and atmospheric corrosion on the corrosion-resistance of steel bars in concrete[J]. Cement and Concrete Composites, 2002, 24(1): 151-158.

[55] [55] TORRES-ACOSTA A A, NAVARRO-GUTIERREZ S, TERN-GUILLN J. Residual flexure capacity of corroded reinforced concrete beams[J]. Engineering Structures, 2007, 29(6): 1145-1152.

[59] [59] HONG S X, QIN S F, DONG P, et al. Quantification of rust penetration profile in reinforced concrete deduced by inverse modeling[J]. Cement and Concrete Composites, 2020, 111: 103622.

[60] [60] NGUYEN C V, LAMBERT P. Effect of current density on accelerated corrosion of reinforcing steel bars in concrete[J]. Structure and Infrastructure Engineering, 2018, 14(11): 1535-1546.

[62] [62] ZHANG W P, CHEN J Y, LUO X J. Effects of impressed current density on corrosion induced cracking of concrete cover[J]. Construction and Building Materials, 2019, 204: 213-223.

[66] [66] LI W W, WU M Z, SHI T S, et al. Experimental investigation of the relationship between surface crack of concrete cover and corrosion degree of steel bar using fractal theory[J]. Fractal and Fractional, 2022, 6(6): 325.

[69] [69] ZHAO Y X, ZHANG X W, DING H J, et al. Non-uniform distribution of a corrosion layer at a steel/concrete interface described by a Gaussian model[J]. Corrosion Science, 2016, 112: 1-12.

[71] [71] BAZN M, REYES E, GLVEZ J C. Influence of pore networking and electric current density on the crack pattern in reinforced concrete test due to pressure rust layer at early ages of an accelerated corrosion test[J]. Materials, 2019, 12(15): 2477.

[74] [74] XIA J, JIN W, LI L Y. Performance of corroded reinforced concrete columns under the action of eccentric loads[J]. Journal of Materials in Civil Engineering, 2016, 28: 04015087.

[75] [75] ANDRADE C. Role of oxygen and humidity in the reinforcement corrosion[C]//Proceedings of the 75th RILEM Annual Week 2021. Cham: Springer International Publishing, 2023: 316-325.

[76] [76] ANDRADE C. Steel corrosion rates in concrete in contact to sea water[J]. Cement and Concrete Research, 2023, 165: 107085.

[80] [80] CAR S, RAHARINAIVO A. Influence of impressed current on the initiation of damage in reinforced mortar due to corrosion of embedded steel[J]. Cement and Concrete Research, 2007, 37(12): 1598-1612.

[81] [81] GRIMES W D, HARTT W H, TURNER D H. Cracking of concrete in sea water due to embedded metal corrosion[J]. Corrosion, 1979, 35(7): 309-316.

[82] [82] WILLIAMSON S J, CLARK L A. Effect of corrosion and load on reinforcement bond strength[J]. Structural Engineering International, 2002, 12(2): 117-122.

[84] [84] ZHU W J, DAI J G, POON C S. Prediction of the bond strength between non-uniformly corroded steel reinforcement and deteriorated concrete[J]. Construction and Building Materials, 2018, 187: 1267-1276.

[87] [87] TIAN Y, ZHANG G Y, JIN X Y, et al. A comparison study on the natural and half-soaking galvanic accelerated corrosion of reinforced concrete based on an improved electrochemical model[J]. Construction and Building Materials, 2020, 261: 120515.

[91] [91] FENG W P, TARAKBAY A, ALI MEMON S, et al. Methods of accelerating chloride-induced corrosion in steel-reinforced concrete: a comparative review[J]. Construction and Building Materials, 2021, 289: 123165.

[92] [92] XI X, YANG S T. Time to surface cracking and crack width of reinforced concrete structures under corrosion of multiple rebars[J]. Construction and Building Materials, 2017, 155: 114-125.

[93] [93] ROBLES K P V, GUCUNSKI N, KEE S H. Evaluation of steel corrosion-induced concrete damage using electrical resistivity measurements[J]. Construction and Building Materials, 2024, 411: 134512.

[94] [94] GAO X X, DEBY F, GOURBEYRE Y, et al. Influence of catholytes on the generation of steel corrosion in concrete with accelerated chloride migration method[J]. Case Studies in Construction Materials, 2022, 16: e01123.

[105] [105] SHI N N, HUANG D H, ZHANG R X. Effect of reinforcement size on concrete crack width with the same reinforcement ratio[J]. Applied Mechanics and Materials, 2012, 193/194: 600-604.

[110] [110] LI Q, JIN X Y, YAN D M, et al. Study of wiring method on accelerated corrosion of steel bars in concrete[J]. Construction and Building Materials, 2021, 269: 121286.

[113] [113] YUAN Y, JI Y, SHAH S P. Comparison of two accelerated corrosion techniques for concrete structures[J]. ACI Structural Journal, 2007, 104(3): 344-347.

[114] [114] DU Y G, CULLEN M, LI C K. Structural performance of RC beams under simultaneous loading and reinforcement corrosion[J]. Construction and Building Materials, 2013, 38: 472-481.

[116] [116] TIAN J, WU X W, ZUO Y, et al. Interface behaviors between smart-functional ECC and steel rebar under coupling effect of sustained load and chloride ion erosion: corrosion resistance, mechanical and self-sensing properties[J]. Construction and Building Materials, 2024, 438: 137205.

[121] [121] LI Q, HUANG L, YE H L, et al. Mechanical degradation of reinforced concrete columns corroded under sustained loads[J]. International Journal of Civil Engineering, 2020, 18(8): 883-901.

[122] [122] LI Q, JIN X Y, WU D, et al. Acoustic emission analysis of corroded reinforced concrete columns under compressive loading[J]. Sensors, 2020, 20(8): 2412.

[126] [126] KOER M, BOA A R, ZTRK M. Investigation of reinforcement corrosion effects in RC columns produced with blast furnace slag and fly ash under reversed-cyclic lateral loading tests[J]. Engineering Structures, 2021, 245: 112866.

[128] [128] HE Z S, HE C, KANG X Y, et al. Effects of sustained load and reinforcement spacing on the evolution and spatial characteristics of corrosion damages in RC segmental specimens[J]. Construction and Building Materials, 2023, 407: 133462.

[129] [129] ZHAO P, XU G, WANG Q, et al. Impact of sustained load on damage characteristics of reinforced concrete beams under the combined action of salt freeze-thaw cycles and corrosion[J]. Construction and Building Materials, 2021, 273: 121744.

[132] [132] ABOSRRA L, ASHOUR A F, YOUSEFFI M. Corrosion of steel reinforcement in concrete of different compressive strengths[J]. Construction and Building Materials, 2011, 25(10): 3915-3925.

[133] [133] ZHAO Y X, REN H Y, DAI H, et al. Composition and expansion coefficient of rust based on X-ray diffraction and thermal analysis[J]. Corrosion Science, 2011, 53(5): 1646-1658.

[134] [134] ZHANG G Y, TIAN Y, FU C Q, et al. The impact of oxygen availability on steel corrosion considering the self-balance between anodic and cathodic corrosion cells[J]. Corrosion Science, 2024, 236: 112252.

[135] [135] SIRIVIVATNANON V, XUE C H, KHATRI R. Long-term reinforcement corrosion in low carbon concrete with a high volume of SCMs exposed to NaCl solutions and field marine environment[J]. Construction and Building Materials, 2023, 393: 132071.

[137] [137] ZHANG L G, LIANG Z Z, LI S L. Effect of current density on the cathodic protection efficiency and mechanical properties of pre-stressed high-strength steel wires for stay cable[J]. Construction and Building Materials, 2022, 314: 125671.

[140] [140] DONG B, YU Y G, FENG Y, et al. Robust numerical solution for assessing corrosion of reinforced concrete structures under external power supply[J]. Engineering Structures, 2023, 294: 116724.

[151] [151] PAP T M, MELCHERS R E. The effects of corrosion on 45-year-old pre-stressed concrete bridge beams[J]. Structure and Infrastructure Engineering, 2011, 7(1/2): 101-108.

[152] [152] LU C H, JIN W L, LIU R G. Reinforcement corrosion-induced cover cracking and its time prediction for reinforced concrete structures[J]. Corrosion Science, 2011, 53(4): 1337-1347.