[1] Zhou Y B, Qin Y, Yang S. Thermal shock resistance and laser rapid prototyping of thermal barrier coatings with network structures[J]. Laser & Optoelectronics Progress, 55, 021412(2018).

[2] Zhang T Y, Wu C, Xiong Z et al. Research progress in materials and preparation techniques of thermal barrier coatings[J]. Laser & Optoelectronics Progress, 51, 030004(2014).

[3] Heuer A H, Lanteri V, Farmer S C et al. On the orthorhombic phase in ZrO2-based alloys[J]. Journal of Materials Science, 24, 124-132(1989). http://link.springer.com/article/10.1007/BF00660943

[4] Clarke D R, Levi C G. Materials design for the next generation thermal barrier coatings[J]. Annual Review of Materials Research, 33, 383-417(2003). http://www.annualreviews.org/doi/abs/10.1146/annurev.matsci.33.011403.113718

[5] Kelly J, Denry I. Stabilized zirconia as a structural ceramic: an overview[J]. Dental Materials, 24, 289-298(2008).

[6] Curtis C E. Development of zirconia resistant to thermal shock[J]. Journal of the American Ceramic Society, 30, 180-196(1947). http://onlinelibrary.wiley.com/doi/10.1111/j.1151-2916.1947.tb18886.x/full

[7] Feuerstein A, Knapp J, Taylor T et al. Technical and economical aspects of current thermal barrier coating systems for gas turbine engines by thermal spray and EBPVD: a review[J]. Journal of Thermal Spray Technology, 17, 199-213(2008).

[8] Li L Q, Liu D J, Chen Y B et al. Electron microscopy study of reaction layers between single-crystal WC particle and Ti-6Al-4V after laser melt injection[J]. Acta Materialia, 57, 3606-3614(2009). http://www.sciencedirect.com/science/article/pii/S1359645409002407

[9] Liu D J, Chen Y B, Li L Q et al. In situ investigation of fracture behavior in monocrystalline WCp-reinforced Ti-6Al-4V metal matrix composites produced by laser melt injection[J]. Scripta Materialia, 59, 91-94(2008).

[10] Vreeling J A. Ocelík V, de Hosson J T M. Ti-6Al-4V strengthened by laser melt injection of WCp particles[J]. Acta Materialia, 50, 4913-4924(2002).

[11] Pei Y T. Ocelik V, de Hosson J T M. SiCp/Ti6Al4V functionally graded materials produced by laser melt injection[J]. Acta Materialia, 50, 2035-2051(2002).

[12] Wang L, Hu Y, Lin Y H et al. Distribution gradient control of laser melt injection reinforcement particles by electromagnetic compound field[J]. Chinese Journal of Lasers, 45, 1002001(2018).

[13] Song S Y, Wang L, Hu Y et al. Graded coating produced by laser melt injection under steady magnetic field[J]. Chinese Journal of Lasers, 43, 0503005(2016).

[14] Liu D J, Tang F, Guo X X et al. Preparation method, microstructure and properties of ZrO2p/Ti-6Al-4V functionally graded thermal barrier composites layers[J]. Journal of Huazhong University of Science and Technology(Nature Science Edition), 45, 112-117(2017).

[15] Guo X X, Lu Y Y, Lin S G et al. The evolution mechanism of morphology and microstructure for ZrO2 ceramic powders irradiated with a laser beam[J]. Materials Science And Technology, 27, 22-28(2019).

[16] Song X W, Xie M, Mu R D et al. Influence of the partial substitution of Y2O3 with Ln2O3 (Ln=Nd, Sm, Gd) on the phase structure and thermophysical properties of ZrO2-Nb2O5-Y2O3 ceramics[J]. Acta Materialia, 59, 3895-3902(2011). http://www.sciencedirect.com/science/article/pii/S1359645411001613

[17] van Sluytman J S, Krämer S, Tolpygo V K et al. . Microstructure evolution of ZrO2-YbTaO4 thermal barrier coatings[J]. Acta Materialia, 96, 133-142(2015).

[18] Miller R A, Smialek J, Garlick R G. Phase stability in plasma-sprayed partially stabilized zirconia-yttria[J]. Advances in Ceramics, 3, 241-253(1981).

[19] Cao X Q, Vassen R, Stoever D. Ceramic materials for thermal barrier coatings[J]. Journal of the European Ceramic Society, 24, 1-10(2004).

[20] Viazzi C, Bonino J P, Ansart F et al. Structural study of metastable tetragonal YSZ powders produced via a sol-gel route[J]. Journal of Alloys and Compounds, 452, 377-383(2008). http://www.sciencedirect.com/science/article/pii/S0925838806017828

[21] [21] Loghman-Estark MR, Razavi RS, Edris H.Synthesis and thermal stability of nontransformable tetragonal (ZrO2)0.96(REO1.5)0.04 (RE=Sc3+, Y3+) nanocrystals[J].Defect and DiffusionForum, 2013, 334/335: 60-64.

[22] Chen Y B, Liu D J, Li L Q et al. Formation mechanism of WCp/Ti-6Al-4V graded metal matrix composites layer produced by laser melt injection. Chinese Journal of Lasers, 35, 1718-1722(2008).

[23] Fabris S, Paxton A T, Finnis M W. A stabilization mechanism of zirconia based on oxygen vacancies only[J]. Acta Materialia, 50, 5171-5178(2002). http://www.sciencedirect.com/science/article/pii/S1359645402003853

[24] Málek J, Beneš L, Mitsuhashi T. Powder diffraction data and Rietveld refinement of metastable t-ZrO2 at low temperature[J]. Powder Diffraction, 12, 96-98(1997). http://journals.cambridge.org/action/displayAbstract;jsessionid=CF04EB98DAA5A386D487A68947DEF2D3.journals?fromPage=online&aid=8512560

[25] Tomaszewski H, Godwod K. Influence of oxygen partial pressure on the metastability of undoped zirconia dispersed in alumina matrix[J]. Journal of the European Ceramic Society, 15, 17-23(1995). http://www.sciencedirect.com/science/article/pii/095522199591295Y

[26] Suyama R, Ashida T. 68(12): C-314-C-315[J]. Kume S. Synthesis of theorthorhombic phase of ZrO₂. Journal of the American Ceramic Society(1985).