[1] [1] CORREA C, LARA L R D, DíAZ M, et al. Effect of advancing direction on fatigue life of 316L stainless steel specimens treated by double-sided laser shock peening［J］. International Journal of Fatigue, 2015, 79:1-9.

[2] [2] GAO Y K. Improvement of fatigue property in 7050-T7451 aluminum alloy by laser peening and shot peening［J］. Materials Science & Engineering, 2011, A528(10/11):3823-3828.

[3] [3] DING K, YE L．Laser shock peening performance and process simulation ［M］． Cambridge,UK: CRC Press, 2006:3-6．

[4] [4] REN X D, ZHAN Q B, YANG H M, et al. The effects of residual stress on fatigue behavior and crack propagation from laser shock processing-worked hole［J］. Materials & Design, 2013, 44:149-154.

[5] [5] ZHANG L, LU J Z, ZHANG Y K, et al. Effects of different shocked paths on fatigue property of 7050-T7451 aluminum alloy during two-sided laser shock processing［J］. Materials & Design, 2011, 32(2):480-486.

[6] [6] JIANG Y F, DING B, CHENG Zh J, et al. Effect of laser peening area on residual stress field in small-hole specimens［J］. Laser Technology, 2014, 38(2):201-204(in Chinese).

[7] [7] LIU Q, YANG C H, DING K, et al. The effect of laser power density on the fatigue life of laser-shock-peened 7050 aluminium alloy［J］. Fatigue & Fracture of Engineering Materials & Structures, 2007, 30(11):1110-1124.

[8] [8] JIANG Y F, ZHANG J W, JING R, et al. Analysis of the residual stress field in hole specimen by laser shock processing with different power density［J］. Laser & Infrared, 2012, 42(8): 866-869(in Chinese).

[9] [9] JIANG Y, JIANG Y F, LI Zh, et al. Investigation of effect of one-side and two-side laser shock processing on aluminum alloy small-hole specimens［J］. Laser Technology, 2016, 40(1):90-93(in Chinese).

[10] [10] FAN Y, WANG S B, WU H X, et al. Research of residual compressive stress induced by laser shock processing on 7050 aerial aluminum alloy［J］. Applied Laser, 2003, 23(1):6-8(in Chinese).

[11] [11] DING K. FEM simulation of two sided laser shock peening of thin sections of Ti-6Al-4V alloy［J］. Surface Engineering, 2003, 19(2):127-133.

[12] [12] ZHANG Y K, CHEN J F, XU R J. Experimental research of laser shock strengthening AM50 magnesium alloy［J］. Chinese Journal of Lasers, 2008, 35(7):1068-1072(in Chinese).

[13] [13] ZHOU J Zh, YANG X D, HUANG Sh, et al. Residual stress field of ZK60 specimen with central hole induced by both-side laser shot peening［J］. Chinese Journal of Lasers, 2010, 37(7):1850-1855(in Chinese).

[14] [14] LUO K Y, CHEN Q, L C, et al. Thickness analysis of two-sided simultaneous laser shock processing on AM50 Mg alloy［J］. Chinese Journal of Lasers, 2014, 41(1):0103003(in Chinese).

[15] [15] JIANG Y F, LI J, PAN Y, et al. Investigation of effect of two-side laser shock order on small-hole specimen strengthening［J］. Laser Technology, 2016, 40(1):82-85(in Chinese).

[16] [16] PEI Y T, DUAN Ch H. Study on stress-wave propagation and residual stress distribution of Ti-17 titanium alloy by laser shock peening［J］. Journal of Applied Physics, 2017, 122(19):193102.

[17] [17] PEI Y T. Study on strengthen mechanism and life extension mechanism of double phase titanium alloy TC17 with laser shock peening［D］. Beijing: Beijing University of Chemical Technology,2017: 21-31(in Chinese).

[18] [18] JOHNSON G R, COOK W H. Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures［J］. Engineering Fracture Mechanics, 1985, 21(1):31-48.

[19] [19] WANG B L. Study on the mechanical properties of titanium alloy TC17 and characteristics in machining［D］. Ji’nan: Shandong University, 2013: 29-31(in Chinese).

[20] [20] FABBRO R, PEYRE P, BERTHE L, et al. Physics and applications of laser-shock processing［J］. Journal of Laser Applications, 1998,10(6): 155-164.

[21] [21] ZHANG W, YAO Y L, NOYAN I C. Microscale laser shock peening of thin films, part 1: Experiment, modeling and simulation［J］. Journal of Manufacturing Science & Engineering, 2004, 126(1):10-17.

[22] [22] ABRATE S. Impact engineering of composite structures［M］.Udine,Italy: Springer, 2011: 161-176.