[1] [1] Tian Yongsheng, Chen Chuanzhong, Wang Deyun. Study on microstructures and mechanical properties of in-situ formed multiphase coatings produced by laser cladding of titanium alloy with silicon and graphite mixed powders ［J］. Chinese J. Lasers, 2004, 31(7): 879～882

[2] [2] Tamer Ezz, Philip Crouse, Lin Li et al.. Synthesis of TiN thin films by a new combined laser/sol-gel processing technique ［J］. Applied Surface Science, 2007, 253(19): 7903～7907

[3] [3] S. Chatterjee, S. M. Shariff, J. D. Majumdar et al.. Development of nano-structured Al2O3-TiB2-TiN coatings by combined SHS and laser surface alloying ［J］. Int. J. Adv. Manuf. Technol., 2008, 38(9-10): 938～943

[4] [4] Xu Changqing, Li Guijiang. Microstructure and wear resistance of TiC carbide-reinforced composite coating prepared by laser surface alloying ［J］. Chinese J. Lasers, 2008, 35(11): 1770～1772

[5] [5] Zhang Weiping, Liu Zhonghua. Study on microstructure of in-situ synthesis of TiC-Cr7C3-Ti-Ni metal-ceramics composite coating ［J］. Chinese J. Lasers, 2008, 35(7): 1091～1094

[6] [6] Y. J. Dong, H. M. Wang. Microstructure and dry sliding wear resistance of laser clad TiC reinforced Ti-Ni-Si intermetallic composite coating ［J］. Surface and Coatings Technol., 2009, 204(5): 731～735

[7] [7] Hu Dongping, Ji Xilin, Jiang Shuning et al.. Research on preparation of nano TiC coating ［J］. Surface Technol., 2004, 33(2): 19～21

[8] [8] Luo Fei, Long Hua, Wang Youqing et al.. Preparation of metallic coating on surface of diamond particles by pulsed laser deposition ［J］. Chinese J. Lasers, 2004, 31(10): 1203～1206

[9] [9] Yang Yuling, Zhang Duo, Chen Hao et al.. Insitu formation of TiC by laser cladding Ti/C coatings ［J］. Applied Laser, 2008, 28(1): 6～8

[10] [10] Wu Xiaolei. In situ formation by laser cladding of a TiC composite coating with a gradient distribution ［J］. Surface and Coatings Technology, 1999, 115(2,3): 111～115

[11] [11] Lei Yiwen, Sun Ronglu, Tang Ying. Growth mechanism of in-situ synthesized TiC and TiB2 by laser cladding ［J］. Chinese J. Lasers, 2009, 36(5): 1287～1291

[12] [12] Sen Yang, Minlin Zhong, Wenjin Liu. TiC particulate composite coating produced in situ by laser cladding ［J］. Materials Science and Engineering A, 2003, 343(1,2): 57～62

[13] [13] Song Mousheng, Liu Zhongxia, Li Jiwen et al.. Effect of titanium alloying manner and titanium content on microstructure and mechanical properties of A356 alloys ［J］. Chinese J. Nonferrous Metals, 2004, 14(10): 1729～1735

[14] [14] G. A. Swift, R. Koc. Formation studies of carbon coater TiO2 ［J］. J. Mater. Sci, 1999, 34(13): 3083～3093

[15] [15] Henry Preiss, Lutz-Michael Berger，Dietrich Schultze. Studies on the carbothermal preparation of titanium carbide from different gel precursors ［J］. J. European Ceramic Society, 1999, 19(2): 195～206

[16] [16] Fang Minxian, Chen Housheng. Thermodynamic principle of preparing Ti(C,N) by carbon-heat reducing ［J］. Materials Science and Engineering of Powder Metallurgy, 2006, 11(6): 329～336

[17] [17] Alexandre Maitre, Daniel Tetard, Pierre Lefort. Role of some technological parameter during carburizing titanium dioxide ［J］. J. European Ceramic Society. 2000, 20(1): 15～22