[1] Yao Y, Zhang J Z, Tan X M. Numerical study of film cooling from converging slot-hole on a gas turbine blade suction side[J]. International Communications in Heat and Mass Transfer, 52, 61-72(2014).

[2] Zhang W W, Zhang T R, Guo C H et al. Some new advances in laser drilling in the field of aircraft engines[J]. OE Products & News, 5, 23-27(2014).

[3] Rhoades L J, Randall G J. Laser back wall protection by particulate shading: US1976659[P](2007).

[4] Weber R, Graf T, Freitag C et al. Processing constraints resulting from heat accumulation during pulsed and repetitive laser materials processing[J]. Optics Express, 25, 3966-3979(2017). http://www.ncbi.nlm.nih.gov/pubmed/28241606

[5] Zhu S J, Zhang Z Y, Chu S L et al. Research and application of massive micropores water-assisted picosecond laser processing technology[J]. Chinese Journal of Lasers, 47, 0302002(2020).

[6] Zhang X Q, Xing S L, Liu L et al. Trepanning of supper-alloy with thermal barrier coating using femtosecond laser[J]. Chinese Journal of Lasers, 44, 0102013(2017).

[7] Yilbas B S. Laser drilling, practical applications[M]. Heidelberg: Springer, 1-81(2013).

[8] Gregory O, Griffith A J, Stroud D. Drilling turbine blades: US5222617[P](1993).

[9] Corfe A G, Stroud D. Laser barrier material and method of laser drilling: US5049722[P](1991).

[10] Stroud D, Corfe A G. Laser barrier material: US5140127[P](1992).

[11] Turner S C. Laser barrier material and method:US5767482[P](1998).

[12] Hu Z L, Darling A D, McDowell S E et al. Method for drilling a hole in an airfoil: US9662743[P](2017).

[13] Knowles M R H, Kearsley A J, Andrews A J et al. Laser-drilling: US6365871[P](2002).

[14] Hu Z L, Darling A D, McDowell S E et al. Method for drilling a hole in an airfoil: US9662743[P](2017).

[15] Wang K D, Yuan X, Dong X et al. Using the mixture of ice and carbon powder as the back wall protection method for laser machining of turbine blades: CN104801857A[P](2015).

[16] Tao J. The experimental studies on laser drilling and back strike protection[D], 47-56(2017).

[17] Tian D P, He B, Li P et al. Investigation of gas film holes machining with no damage on inner surface of cavity by femtosecond laser[J]. Aviation Precision Manufacturing Technology, 54, 6-9(2018).

[18] Horn A, Weichenhain R, Albrecht S et al. Microholes in zirconia-coated Ni-superalloys for transpiration cooling of turbine blades[J]. Proceedings of SPIE, 4065, 218-226(2000). http://spie.org/Publications/Proceedings/Paper/10.1117/12.407331

[19] Dahotre B N, Harimkar P S. Laser fabrication and machining of materials[M]. Heidelberg: Springer, 67-137(2008).

[20] Guo W Y, Wang M C, Zhang X B. Recast layer formed by laser drilling of Ni-based superalloys and progress on its control[J]. Laser Journal, 24, 1-3(2003).

[21] Weber R, Graf T, Freitag C et al. Processing constraints resulting from heat accumulation during pulsed and repetitive laser materials processing[J]. Optics Express, 25, 3966-3979(2017). http://www.ncbi.nlm.nih.gov/pubmed/28241606

[22] Qi H X, Zhao L, Jin C L et al. Influence of sample temperature on spectral intensity of nanosecond laser-induced aluminum plasma[J]. Chinese Journal of Lasers, 46, 0211002(2019).

[23] Cai Z L, Yang Q S, Wang Y. Femtosecond laser-induced breakdown spectral analysis of Cu-Al alloy sputtered thin films[J]. Chinese Journal of Lasers, 42, 0615001(2015).

[24] Zhou S S, Wang X B, Zuo D L. Characteristics of carbon plasma induced by pulsed laser[J]. Chinese Journal of Lasers, 46, 0111001(2019).

[25] Hu X D, Li Y L, Bai S Z et al. Research progress of laser application in material removal[J]. Laser & Optoelectronics Progress, 58, 0500008(2021).

[26] Li X J, Dong Y W, Yin C P et al. Geometric parameters evolution experiment of hole during femtosecond laser helical drilling[J]. Chinese Journal of Lasers, 45, 0502008(2018).

[27] Tseng S F, Chen M F, Hsiao W T et al. Laser micromilling of convex microfluidic channels onto glassy carbon for glass molding dies[J]. Optics and Lasers in Engineering, 57, 58-63(2014). http://www.sciencedirect.com/science/article/pii/S0143816613003461

[28] Liu X D, Chen L, Wang X Z et al. Study of micro-milling blind holes in Al2O3 ceramics with UV laser[J]. Laser & Optoelectronics Progress, 58, 0514005(2021).