[6] KIM D E, KIM M H. Experimental study of the effects of flow acceleration and buoyancy on heat transfer in a supercritical fluid flow in a circular tube[J]. Nuclear Engineering and Design, 240, 3336-3349(2010).

[7] KIM D E, KIM M H. Experimental investigation of heat transfer in vertical upward and downward supercritical CO₂ flow in a circular tube[J]. International Journal of Heat and Fluid Flow, 32, 176-191(2011).

[8] KIM D E, KIM M H. Two layer heat transfer model for supercritical fluid flow in a vertical tube[J]. The Journal of Supercritical Fluids, 58, 15-25(2011).

[9] ZAHLAN H, GROENEVELD D, TAVOULARIS S. Measurements of convective heat transfer to vertical upward flows of CO₂ in circular tubes at near-critical and supercritical pressures[J]. Nuclear Engineering and Design, 289, 92-107(2015).

[11] HE S, KIM W S, JACKSON J D. A computational study of convective heat transfer to carbon dioxide at a pressure just above the critical value[J]. Applied Thermal Engineering, 28, 1662-1675(2008).

[12] BAE J H, YOO J Y, CHOI H. Direct numerical simulation of turbulent supercritical flows with heat transfer[J]. Physics of Fluids, 17, 105104(2005).

[14] LI Z H, WU Y X, TANG G L et al. Comparison between heat transfer to supercritical water in a smooth tube and in an internally ribbed tube[J]. International Journal of Heat and Mass Transfer, 84, 529-541(2015).

[15] LIU X X, XU X X, LIU C et al. Numerical study of the effect of buoyancy force and centrifugal force on heat transfer characteristics of supercritical CO₂ in helically coiled tube at various inclination angles[J]. Applied Thermal Engineering, 116, 500-515(2017).

[16] [16] VAN ABEL MARK E N, ERSON H, CRADINI M L. Numerical investigation of pressure local heat transfer of supercritical CO2 in printed circuit heat exchangers[C]Proceedings of Supercritical CO2 Power Cycle Symposium. Boulder, Colado: [s.n.], 2011.

[17] MENTER F R. Two-equation eddy-viscosity turbulence models for engineering applications[J]. AIAA Journal, 32, 1598-1605(1994).

[18] KOO G W, LEE S M, KIM K Y. Shape optimization of inlet part of a printed circuit heat exchanger using surrogate modeling[J]. Applied Thermal Engineering, 72, 90-96(2014).

[19] [19] NATHAN K. An experimental study of heat transfer deteriation at supercritical pressures[D]. Ottawa: University of Ottawa, 2017.

[20] SONG J H, KIM H Y, KIM H et al. Heat transfer characteristics of a supercritical fluid flow in a vertical pipe[J]. The Journal of Supercritical Fluids, 44, 164-171(2008).