[1] [1] HE B, WEN Y P. Design of hydraulic cylinder straightness error detection device based on pneumatic and laser collimation［J］. Machine Tool & Hydraulics, 2017, 45(15): 133-136 (in Chinese).

[2] [2] LIU Sh G, YANG X J, ZHENG W H. Deep shaft verticality detection method based on laser collimation ［J］. Safety in Coal Mines, 2019, 50(12): 123-126(in Chinese).

[3] [3] CHEN H F, TANG L, ZHANG Sh, et al. Effects of position sensitive detector on laser tracing measurement system ［J］. Chinese Journal of Lasers, 2020, 47(11): 1104001(in Chinese).

[4] [4] ZHOU B Y. Development of small angle measuring system for peg-top based on PSD［D］. Wuhan: Huazhong University of Science and Technology, 2005: 19-30 (in Chinese).

[5] [5] LIU Z Y, ZHANG J, DENG F M. Research of on-line monitoring of rail distance system based on position sensitive detector ［J］. Laser Technology, 2020, 44(2): 183-189(in Chinese).

[6] [6] LI J L. Research on remote measurement and control for displacement based on position sensitive detector ［D］. Wuhan: Huazhong University of Science and Technology, 2019: 12-29 (in Chinese).

[7] [7] JIANG X D, YU J Y, ZHU L K. Research of combined navigation technology based on position sensitive detectors［J］. Laser Technology, 2019, 43(3): 335-340(in Chinese).

[8] [8] LOU Zh B, ZHAO H, LIU Q, et al. Two-dimensional rotation angle dynamic measurement system combining laser collimation［J］. Optics and Precision Engineering, 2019, 27(3): 561-568(in Chinese).

[9] [9] YIN Zh Y, QIANG X W, WANG Y F, et al. Research of laser diode beam collimation based on astigmatism surface microlens［J］. Laser Technology, 2015, 39(4): 458-461(in Chinese).

[10] [10] HE F, ZHANG W T, XIONG X M. 3-D simulation analysis of laser-collimating Cr atomic beam ［J］. Laser & Infrared, 2015, 45(6): 605-610(in Chinese).

[11] [11] ZHANG L G, XIONG Zh, FENG W, et al. Laser tracking attitude angle measurement method based on vision and laser collimation ［J］. Chinese Journal of Scientific Instrument, 2020, 41(8): 30-36(in Chinese).

[12] [12] YU D Y, TAN H Y. Engineering optics［M］. 4th ed. Beijing: Ch-ina Machine Press, 2016: 165-170 (in Chinese).

[13] [13] WANG H M. Engineering optics［M］. 2nd ed. Beijing: Peking University Press, 2018: 160-165 (in Chinese).

[14] [14] CAI Y Y. Measurement of angular position error based on laser collimation and error model ［D］. Beijing: Beijing Jiaotong University, 2017: 16-24 (in Chinese).

[15] [15] DENG H Y. Research on bending measurement method of double laser collimated CCD［J］. Ship Science and Technology, 2019, 41(16): 46-48(in Chinese).

[16] [16] HAN J H. Interchangeability and technical measurement［M］. 2nd ed. Beijing: China Machine Press, 2018: 19-26 (in Chinese).

[17] [17] LUO L M, LI A X, LIU J. Evaluation of uncertainty in measurement results of chassis dynamometer［J］. China Metrology, 2019, 44(2): 113-114(in Chinese).

[18] [18] ZHANG Sh Y, WANG H L, QIN Zh J, et al. Research on all-fiber acousto-optic modulation roughness correlation measurement technology［J］. Laser Journal, 2020, 41(2): 25-28(in Chinese).

[19] [19] CAO M, WANG E, LI B, et al. Analysis of calibration and uncertainty of FBG displacement sensor［J］. Sensors and Microsystems, 2016, 35(4): 35-37(in Chinese).

[20] [20] LIU K, WANG H L, SUN S Q. Study on electron modulation laser coherent shaft vibration measurement technology［J］. Laser Technology, 2018, 42(4): 466-469(in Chinese).

[21] [21] CAO Q Q, WANG H L, SONG H Y, et al. Research of radial run-out differential measurement technology with all fiber acousto-optic modulation［J］. Laser Technology, 2020, 44(1): 50-53(in Chin-ese).