[1] MORTENSEN A, LLORCA J. Metal matrix composites[J]. Annual Review of Materials Research, 243(2010).

[2] MIRACLE D B. Metal matrix composites-from science to technological significance[J]. Composites Science and Technology, 2526(2005).

[3] YU W H, SING S L, CHUA C N et al. Particle-reinforced metal matrix nanocomposites fabricated by selective laser melting: a state of the art review[J]. Progress in Materials Science, 330(2019).

[4] MACKE A, SCHULTZ B F, ROHATGI P. Metal matrix composites offer the automotive industry an opportunity to reduce vehicle weight, improve performance[J]. Advanced Materials & Processes, 19(2012).

[5] SUN Z M. Progress in research and development on MAX phases: a family of layered ternary compounds[J]. Progress in Materials Science, 143(2011).

[6] BARSOUM M W, RADOVIC M. Elastic and mechanical properties of the MAX phases[J]. Annual Review of Materials Research, 195(2011).

[7] EKLUND P, BECKERS M, JANSSON U et al. The M_n+1AX_n phases: materials science and thin-film processing[J]. Thin Solid Films, 1851(2010).

[8] GONZALEZ-JULIAN J. Processing of MAX phases: from synthesis to applications[J]. Journal of the American Ceramic Society, 659(2021).

[9] HU W Q, HUANG Z Y, WANG Y B et al. Layered ternary MAX phases and their MX particulate derivative reinforced metal matrix composite: a review[J]. Journal of Alloys and Compounds, 157313(2021).

[10] GUPTA S, BARSOUM M W. On the tribology of the MAX phases and their composites during dry sliding: a review[J]. Wear, 1878(2011).

[11] CHEN W T, YU W B, MA C S et al. A review of novel ternary nano-layered MAX phases reinforced AZ91D magnesium composite[J]. Journal of Magnesium and Alloys, 1457(2022).

[12] GRIESELER R, CAMARGO M K, HOPFELD M et al. Copper- MAX-phase composite coatings obtained by electro-co-deposition: a promising material for electrical contacts[J]. Surface and Coatings Technology, 219(2017).

[13] YU W B, WANG X J, ZHAO H B et al. Microstructure, mechanical properties and fracture mechanism of Ti₂AlC reinforced AZ91D composites fabricated by stir casting[J]. Journal of Alloys and Compounds, 199(2017).

[14] YU W B, ZHAO H B, WANG X J et al. Synthesis and characterization of textured Ti₂AlC reinforced magnesium composite[J]. Journal of Alloys and Compounds, 191(2018).

[15] YU W B, CHEN D Q, TIAN L et al. Self-lubricate and anisotropic wear behavior of AZ91D magnesium alloy reinforced with ternary Ti₂AlC MAX phases[J]. Journal of Materials Science & Technology, 275(2019).

[16] YU W B, LI X B, VALLET M et al. High temperature damping behavior and dynamic Young’s modulus of magnesium matrix composite reinforced by Ti₂AlC MAX phase particles[J]. Mechanics of Materials, 246(2019).

[17] LI X N, LI P Y, LIU Z Q et al. Microstructure and mechanical properties of Ti₃AlC₂ reinforced Al-4.5Cu-1.5Mg composites fabricated by powder metallurgy[J]. Journal of Materials Science, 2570(2023).

[18] SUN H F, LI X W, ZHANG P et al. The microstructure and tensile properties of the Ti₂AlC reinforced TiAl composites fabricated by powder metallurgy[J]. Materials Science & Engineering A, 257(2014).

[19] WANG W Z, SOKOL M, KOTA S et al. Reaction paths and microstructures of nickel and Ti₂AlC mixtures hot pressed and annealed in the 1050-1350 ℃ temperature range[J]. Journal of Alloys and Compounds, 154193(2020).

[20] HUANG X C, FENG Y, QIAN G et al. Physical, mechanical, and ablation properties of Cu-Ti₃AlC₂ composites with various Ti₃AlC₂ contents[J]. Materials Science and Technology, 757(2018).

[21] ZHANG J, WANG J Y, ZHOU Y C. Structure stability of Ti₃AlC₂ in Cu and microstructure evolution of Cu-Ti₃AlC₂ composites[J]. Acta Materialia, 4381(2007).

[22] ZHAO H, FENG Y, QIAN G et al. Effect of Ti₃AlC₂ content on electrical friction and wear behaviors of Cu-Ti₃AlC₂ composites[J]. Tribology Letters, 96(2019).

[23] SHU S L, QIU F, LU S J et al. Phase transitions and compression properties of Ti₂AlC/TiAl composites fabricated by combustion synthesis reaction[J]. Materials Science & Engineering A, 344(2012).

[24] AI T T, LIU F, FENG X M et al. Processing, microstructural characterization and mechanical properties of in situ Ti₃AlC₂/TiAl₃ composite by hot pressing[J]. Materials Science & Engineering A, 297(2014).

[25] LI L, ORTIZ C. A natural 3D interconnected laminated composite with enhanced damage resistance[J]. Advanced Functional Materials, 3463(2015).

[26] ROY S, GIBMEIER J, KOSTOV V et al. Internal load transfer in a metal matrix composite with a three-dimensional interpenetrating structure[J]. Acta Materialia, 1424(2011).

[27] GUO Y, XIE X, LIU Z Q et al. Wear-resistant Ag-MAX phase 3D interpenetrating-phase composites: processing, structure and properties[J]. Nano Research.

[28] WEGST U G K, BAI H, SAIZ E et al. Bioinspired structural materials[J]. Nature Materials, 23(2015).

[29] LIU Y Y, XIE X, LIU Z Q et al. A strong, lightweight, and damping cermet material with a nacre-like ultrafine 3D interpenetrated architecture[J]. Materials Today, 62(2023).

[30] JIAO D, LIU Z Q, ZHU Y K et al. Mechanical behavior of mother-of-pearl and pearl with flat and spherical laminations[J]. Materials Science and Engineering: C, 9(2016).

[31] LIU Y Y, XIE X, LIU Z Q et al. Strong and tough magnesium- MAX phase composites with nacre-like lamellar and brick-and- mortar architectures[J]. Communications Materials, 30(2023).

[32] GUPTA S, FILIMONOV D, PALANISAMY T et al. Ta₂AlC and Cr₂AlC Ag-based composites - new solid lubricant materials for use over a wide temperature range against Ni-based superalloys and alumina[J]. Wear, 1479(2007).

[33] AGNE M T, RADOVIC M, BENTZEL G W et al. Stability of V₂AlC with Al in 800-100 ℃ temperature range and in situ synthesis of V₂AlC/Al composites[J]. Journal of Alloys and Compounds, 279(2016).