[1] [1] Dong Ling, Yang Xichen, Zhang Haiming, et al. Path generation for repairing damaged parts of free-form surfaces in laser remanufacturing［J］. Chinese J Lasers, 2012, 39(7): 0703007.

[2] [2] Liu Lifeng, Yang Xichen. Path planning of laser remanufacturing robot based on reverse engineering［J］. Chinese J Lasers, 2011, 38(7): 0703008.

[3] [3] Jang Fubing, Shi Shihong, Shi Tuo, et al. Experimental research on curved surface cladding based on robotic technology and inside-laser powder feeding technology［J］. Chinese J Lasers, 2015, 42(8): 0803003.

[4] [4] Calleja A, Tabernero I, Ealo J A, et al. Feed rate calculation algorithm for the homogeneous material deposition of blisk blades by 5-axis laser cladding［J］. The International Journal of Advanced Manufacturing Technology, 2014, 74(9): 1219-1228.

[5] [5] Zhu Gangxian, Shi Shihong, Fu Geyan, et al. Research on variable reference plane cladding based on laser processing robot with inside-laser powder feeding［J］. Chinese J Lasers, 2015, 42(3): 0303010.

[6] [6] Zhu Gangxian, Zhang Anfeng, Li Dichen. Effect of process parameters on surface smoothness in laser cladding［J］. Chinese J Lasers, 2010, 37(1): 296-301.

[7] [7] Li Yangliang, Bai Xiaobo, Wang Li, et al. Effect of laser cladding processing parameters on microstructure and properties of cladding layer［J］. Material & Heat Treatment, 2009, 38(12): 101-103.

[8] [8] Liu Ximing. Powder-laser matching in the coaxial powder feeding and laser cladding process［J］. Journal of Changchun University of Technology, 2012, 33(5): 513-520.

[9] [9] Ke Yinglin, Wang Qing. Research on point cloud slicing technique in reverse engineering［J］. Journal of Computer-Aided Design & Computer Graphics, 2005, 17(8): 1798-1802.

[10] [10] Kiswanto G, Lauwers B, Kruth J. Gouging elimination through tool lifting in tool path 104 generation for five-axis milling based on faceted models［J］. The International Journal of Advanced Manufacturing Technology, 2007, 32(3): 293-309.

[11] [11] Xu Qinghong, Guo Wei, Tian Xitang. Effect of laser scanning velocity on macroscopic quality of laser cladding［J］. Aerospace Technology, 1997(4): 1-4.

[12] [12] Ding Han, Zhu Liming. Digital manufacturing complex surface geometry theories and methods［M］. Beijing: Science Press, 2011: 41-45.

[13] [13] Jung H B, Kim K. A new parameterisation method for NURBS surface interpolation［J］. International Journal of Advanced Manufacturing Technology, 2000, 16(11): 784-790.

[14] [14] Brujic D, Ristic M, Ainsworth I. Measurement-based modification of NURBS surfaces［J］. Computer-Aided Design, 2002, 34(3): 173-183.

[15] [15] Miao Dongjing, Wang Guolei, Wu Liao, et al. Trajectory planning for freeform surface uniform spraying［J］. Journal of Tsinghua University, 2013, 53(10): 1418-1423.

[16] [16] Chen Ying, Sun Wenlei, Huang Yong, et al. Path planning of laser cladding for curved surface parts［J］. Laser & Optoelectronics Progress, 2016, 53(6): 061405.