Researching | Numerical Simulation and Verification of T2 Red Copper Molten Pool in Magnetic Field Assisted Laser Welding

Laser & Optoelectronics Progress, Volume. 61, Issue 15, 1514008(2024)

Numerical Simulation and Verification of T2 Red Copper Molten Pool in Magnetic Field Assisted Laser Welding

Lifang Mei^1、*, Jifei Huang¹, Dongbing Yan¹, Jun Yang¹, Yang Liu¹, and Mingjun Zhang²

Author Affiliations

¹College of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen 361024, Fujian , China

²College of Automotive and Mechanical Engineering, Changsha University of Science and Technology, Changsha 410114, Hunan , China

show less

Abstract Get PDF(in Chinese)

Figures&Tables (11)

References (20)

Paper Information

References(20)

[1] Li J H, Lei L Y, Du M K et al. Structure and properties of T2 copper/304 stainless steel laser welded joint[J]. Laser & Optoelectronics Progress, 59, 1316001(2022).

[2] Hess A, Weber R, Heider A et al. Forced deep-penetration welding with low-power second-harmonic assistance of cw copper welding with 1 μm wavelength[J]. Physics Procedia, 5, 29-36(2010).

[3] Petring D, Goneghany V N. Parameter dependencies of copper welding with multi-kW lasers at 1 micron wavelength[J]. Physics Procedia, 12, 95-104(2011).

[4] Yan L, Jam J E, Beni M H et al. Effect of laser welding parameters on the temperature distribution, microstructure and mechanical properties of dissimilar weld joint of Inconel 625 and stainless steel 304[J]. International Communications in Heat and Mass Transfer, 131, 105859(2022).

[5] Lu X Z. Laser micro-jet processing on red copper[J]. Advanced Materials Research, 602/603/604, 2040-2044(2012).

[6] Cheng J B, Xu B S, Liang X B et al. Microstructure and mechanical characteristics of iron-based coating prepared by plasma transferred arc cladding process[J]. Materials Science and Engineering: A, 492, 407-412(2008).

[7] Bachmann M, Avilov V, Gumenyuk A et al. About the influence of a steady magnetic field on weld pool dynamics in partial penetration high power laser beam welding of thick aluminium parts[J]. International Journal of Heat and Mass Transfer, 60, 309-321(2013).

[8] Bachmann M, Avilov V, Gumenyuk A et al. Experimental and numerical investigation of an electromagnetic weld pool support system for high power laser beam welding of austenitic stainless steel[J]. Journal of Materials Processing Technology, 214, 578-591(2014).

[9] Bachmann M, Avilov V, Gumenyuk A et al. Numerical assessment and experimental verification of the influence of the Hartmann effect in laser beam welding processes by steady magnetic fields[J]. International Journal of Thermal Sciences, 101, 24-34(2016).

[10] Zhou J, Tsai H L. Effects of electromagnetic force on melt flow and porosity prevention in pulsed laser keyhole welding[J]. International Journal of Heat and Mass Transfer, 50, 2217-2235(2007).

[11] Chen J C, Wei Y H, Zhan X H et al. Weld profile, microstructure, and mechanical property of laser-welded butt joints of 5A06 Al alloy with static magnetic field support[J]. The International Journal of Advanced Manufacturing Technology, 92, 1677-1686(2017).

[12] Chen J C, Wei Y H, Zhan X H et al. Influence of magnetic field orientation on molten pool dynamics during magnet-assisted laser butt welding of thick aluminum alloy plates[J]. Optics & Laser Technology, 104, 148-158(2018).

[13] Chen J C, Wei Y H, Zhan X H et al. Thermoelectric currents and thermoelectric-magnetic effects in full-penetration laser beam welding of aluminum alloy with magnetic field support[J]. International Journal of Heat and Mass Transfer, 127, 332-344(2018).

[14] Qiu H X, Yu W B, Song J L et al. Numerical simulation of laser cladding 316L/H13+20%WC composite coating on H13 steel surface[J]. Laser & Optoelectronics Progress, 59, 0314002(2022).

[15] Chai R X, Tian Y, Zhou X J et al. Numerical simulation and experimental study of high-speed laser cladding under circular scanning path[J]. Chinese Journal of Lasers, 50, 0802205(2023).

[16] Evdokimov A, Doynov N, Ossenbrink R et al. Thermomechanical laser welding simulation of dissimilar steel-aluminum overlap joints[J]. International Journal of Mechanical Sciences, 190, 106019(2021).

[17] Li X B, Lu F G, Cui H C et al. Numerical modeling on the formation process of keyhole-induced porosity for laser welding steel with T-joint[J]. The International Journal of Advanced Manufacturing Technology, 72, 241-254(2014).

[18] Zhou X F, Cao X B, Zhang F et al. Numerical and experimental investigation of thermal stress distribution in laser lap welding of Ti6Al4V and 2024 alloy plates[J]. The International Journal of Advanced Manufacturing Technology, 118, 1427-1440(2022).

[19] Gao X S, Wu C S, Goecke S F et al. Numerical simulation of temperature field, fluid flow and weld bead formation in oscillating single mode laser-GMA hybrid welding[J]. Journal of Materials Processing Technology, 242, 147-159(2017).

[20] Chen X, Luo M, Hu R Z et al. Thermo-electromagnetic effect on weld microstructure in magnetically assisted laser welding of austenite steel[J]. Journal of Manufacturing Processes, 41, 111-118(2019).

Tools

Get Citation

Copy Citation Text

Lifang Mei, Jifei Huang, Dongbing Yan, Jun Yang, Yang Liu, Mingjun Zhang. Numerical Simulation and Verification of T2 Red Copper Molten Pool in Magnetic Field Assisted Laser Welding[J]. Laser & Optoelectronics Progress, 2024, 61(15): 1514008

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Lasers and Laser Optics

Received: Jul. 3, 2023

Accepted: Aug. 30, 2023

Published Online: Aug. 5, 2024

The Author Email: Lifang Mei (meilifang@xmut.edu.cn)

DOI:10.3788/LOP232018

CSTR:32186.14.LOP232018

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology