[1] [1] J. Yu, X. Lin, L. Ma et al.. Influence of laser deposition patterns on part distortion, interior quality and mechanical properties by laser solid forming (LSF)［J］. Materials Science and Engineering: A, 2011, 528(3): 1094～1104

[2] [2] Zhu Gangxian, Zhang Anfeng, Li Dichen. Effect of process parameters on surface smoothness in laser cladding［J］. Chinese J. Lasers, 2010, 37(1): 296～301

[3] [3] J. P. Kruth, P. Mercelis, J. Van Vaerenbergh et al.. Feedback control of selective laser melting［C］: Proceedings of the 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping: Virtual and Rapid Manufacturing Advanced Research Virtual and Rapid Prototyping, 2007, 29

[4] [4] Yu Jun, Chen Jing, Tan Hua et al.. Effect of process parameters in the laser rapid forming on deposition layer［J］. Chinese J. Lasers, 2007, 34(7): 1014～1018

[5] [5] Chen Guangxia, Wang Zemin, Guan Kai et al.. Effects of parameters on surface roughness of samples by selective laser melting［J］. Manufacturing Technology & Machina Tool, 2009, (12): 86～89

[6] [6] Zhang Fengying, Chen Jing, Tan Hua et al.. Powder delivery behavior during laser solid forming from blended elemental powders［J］. Chinese J. Lasers, 2009, 36(5): 1267～1272

[7] [7] H. Tan, J. Chen, F. Zhang et al.. Process analysis for laser solid forming of thin-wall structure［J］. International Journal of Machine Tools and Manufacture, 2010, 50(1): 1～8

[8] [8] Stamp R., Fox P., O′Neill W. et al.. The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting［J］. J. Mater. Sci. Mater Med., 2009, 20(9): 1839～1848

[9] [9] Zhang Shuangyin, Lin Xin, Chen Jing et al.. Influence of processing parameter on the microstructure and forming characterizations of Ti-6Al-4V titanium alloy after aser rapid forming processing［J］. Rare Metal Materials and Engineering, 2007, 36(10): 1839～1843

[10] [10] Ning Guoqing, Zhong Minlin, Yang Lin et al.. Research about close-loop control system during laser direct manufacturing metallic components［J］. Applied Laser, 2002, 22(2): 172～176

[11] [11] I. Yadroitsev, A. Gusarov, I. Yadroitsava et al.. Single track formation in selective laser melting of metal powders［J］. Journal of Materials Processing Technology, 2010, 210(12): 1624～1631