[1] Huang G H, Zhang D M, Yan D X et al. Manufacturing technology research on invar steel mould[J]. Advances in Aeronautical Science and Engineering, 2, 485-488(2011).

[2] Soutis C. Fibre reinforced composites in aircraft construction[J]. Progress in Aerospace Sciences, 41, 143-151(2005).

[3] Lagarec K, Rancourt D G, Bose S K et al. Observation of a composition-controlled high-moment/low-moment transition in the face centered cubic Fe-Ni system: Invar effect is an expansion, not a contraction[J]. Journal of Magnetism and Magnetic Materials, 236, 107-130(2001).

[4] Liu Y. Study on MIG automatic welding technology of civil aircraft Invar die steel[D](2015).

[5] Ling W L. Study on welding parametric modeling and process optimization of typical structure of Invar alloy mold[D](2020).

[6] Wang Q, Dong Y W, Jiang Z H et al. Enhancing low thermal expansion behavior and strength via induced Zr-rich intermetallic phase in Fe-36Ni Invar alloy[J]. Materials & Design, 226, 111644(2023).

[7] Jiao G H, Fang X W, Chen X M et al. The origin of low thermal expansion coefficient and enhanced tensile properties of Invar alloy fabricated by directed energy deposition[J]. Journal of Materials Processing Technology, 317, 117994(2023).

[8] Rao X X, Ru Y D, Guo F M et al. Abnormal strain evolution of austenite upon martensitic transformation in FeNiCo alloy with invar effect: an in situ study[J]. Scripta Materialia, 220, 114942(2022).

[9] Wu D J, Zhang T W, Ma G Y et al. Influence of welding parameters on the morphology of Fe-Ni alloy with continuous wave YAG laser[J]. Chinese Journal of Lasers, 40, 0303003(2013).

[10] Wu D J, Yin B, Zhang W Z et al. Nd ∶YAG laser beam welding Invar 36 alloy[J]. Chinese Journal of Lasers, 35, 1773-1777(2008).

[11] Li G, Gao M, Chen C et al. Characterisation comparison of laser and laser–arc hybrid welding of Invar 36 alloy[J]. Science and Technology of Welding and Joining, 19, 30-37(2014).

[12] Zhao J Y, Wang J Y, Kang X F et al. Effect of beam oscillation and oscillating frequency induced heat accumulation on microstructure and mechanical property in laser welding of Invar alloy[J]. Optics & Laser Technology, 158, 108831(2023).

[13] Li Y F, Wang F, Liu H B et al. Effect of surface roughness on the performances of laser-welded Invar 36 alloy joints[J]. Optics & Laser Technology, 162, 109307(2023).

[14] Liu H B, Xuan Y, Yang J. Research status and prospect of invar alloy welding technology[J]. Aeronautical Manufacturing Technology, 63, 83-88, 102(2020).

[15] Cheng H, Zhou L G, Liu J et al. Effect of heat input on microstructure and mechanical properties of laser welded joint of Inconel 617 nickel-based superalloy[J]. Journal of Materials Engineering, 51, 113-121(2023).

[16] Zhang T W. Effect of laser welding process on weld quality of Fe-Ni alloy[D](2013).

[17] StJohn D H, Prasad A, Easton M A et al. The contribution of constitutional supercooling to nucleation and grain formation[J]. Metallurgical and Materials Transactions A, 46, 4868-4885(2015).

[18] Jiang Z G, Chen X, Li H et al. Grain refinement and laser energy distribution during laser oscillating welding of Invar alloy[J]. Materials & Design, 186, 108195(2020).

[19] Hao K D, Gong M C, Pi Y M et al. Effect of Ni content on rolling toughness of laser-arc hybrid welded martensitic stainless steel[J]. Journal of Materials Processing Technology, 251, 127-137(2018).

[20] Cui S W, Shi Y H, Sun K et al. Microstructure evolution and mechanical properties of keyhole deep penetration TIG welds of S32101 duplex stainless steel[J]. Materials Science and Engineering: A, 709, 214-222(2018).

[21] Chen D, Liu T, Zhao Y Q et al. Effect of grain size on mechanical properties of double laser-beam bilateral synchronous welding joint[J]. Chinese Journal of Lasers, 48, 1002120(2021).

[22] Fang H, Xue H, Tang Q Y et al. Dendrite coarsening and secondary arm migration in the mushy zone during directional solidification: experiment and simulation[J]. Acta Metallurgica Sinica, 55, 664-672(2019).

[23] Ren W J, Lu F G, Yang R J et al. A comparative study on fiber laser and CO2 laser welding of Inconel 617[J]. Materials & Design, 76, 207-214(2015).