Acta Optica Sinica, Volume. 44, Issue 13, 1311001(2024)

Analysis of Target Detection Capability of Infrared Fiber Image Bundle Optical System

Shengjie Liu1,2,3,4, Junwei Li1,2,3,4, Hao Chen1,2,3、*, and Shengqian Wang1,2,3,4
Author Affiliations
  • 1Key Laboratory of Adaptive Optics, Chinese Academy of Sciences, Chengdu 610209, Sichuan , China
  • 2National Laboratory on Adaptive Optics, Chengdu 610209, Sichuan , China
  • 3Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, Sichuan , China
  • 4University of Chinese Academy of Sciences, Beijing 100049, China
  • show less
    Figures & Tables(18)
    Structural schematic diagram of hexagonal fiber bundle coupling optical system
    Schematic diagrams of two types of fiber optic bundles with different spatial arrangements. (a) Square arrangement; (b) hexagonal arrangement
    Front telescopic system. (a) Optical structure diagram; (b) spot diagram; (c) MTF
    Rear coupling system. (a) Optical structure diagram; (b) spot diagram; (c) MTF
    Infrared detection system. (a) Optical structure diagram; (b) spot diagram; (c) MTF
    Point spread function of infrared detection system
    Calculation process of the average FPV of the traditional optical system
    Target images at different positions. (a) At the center of the pixel; (b) at the right edge of the pixel; (c) at the upper right corner of the pixel
    Point spread functions. (a) Front telescopic system; (b) rear coupling system
    Fiber characteristic function distributions. (a) Fiber receiving aperture function (fiber pulse response function); (b) fiber spatial sampling function
    Corresponding relationship between pixel array and fiber array image
    Calculation process of the average FPV' of the fiber bundle optical system
    Simulation imaging of fiber bundle optical system. (a) Image of the input surface of the fiber bundle; (b) image of the output surface of the fiber bundle; (c) detector surface image; (d) detector output image (normalized)
    FPV' distributions of different detector pixels. (a) Variation of pixel FPV' with pixel index; (b) variation of pixel average FPV' with different pixel numbers
    Distribution of fiber-pixel coupling area corresponding to different pixels
    Relationship between detection SNR attenuation coefficient and fiber transmittance
    • Table 1. Parameter table of long-wave infrared fiber bundle optical system[10]

      View table

      Table 1. Parameter table of long-wave infrared fiber bundle optical system[10]

      System typeParameterValue

      Front telescopic

      system

      Wavelength /μm8-12
      Aperture /mm80
      Focal length /mm58.5
      Field of view /[(°)×(°)]2.30×0.17
      Distortion /%<0.1
      Imaging NA0.56

      Rear coupling

      system

      Wavelength /μm8-12
      Magnification2
      Distortion /%<0.5
      Objective NA0.46

      Cooling infrared

      detector

      Wavelength /μm8-12
      Resolution320×256
      Photosensitive size /μm25
      Pixel spacing /μm30
    • Table 2. Parameter table of a commercial long-wave infrared fiber bundle[12]

      View table

      Table 2. Parameter table of a commercial long-wave infrared fiber bundle[12]

      ParameterValue
      Wavelength /μm3-11.5
      Resolution /(lp/mm)20
      Breakage rate /%1
      Crosstalk rate /%2
      Maximum pixel number106
      Minimum core diameter /μm10
      Typical transmission loss /(dB/m)<1
    Tools

    Get Citation

    Copy Citation Text

    Shengjie Liu, Junwei Li, Hao Chen, Shengqian Wang. Analysis of Target Detection Capability of Infrared Fiber Image Bundle Optical System[J]. Acta Optica Sinica, 2024, 44(13): 1311001

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Imaging Systems

    Received: Feb. 26, 2024

    Accepted: Mar. 28, 2024

    Published Online: Jul. 17, 2024

    The Author Email: Chen Hao (chenhao114@mails.ucas.ac.cn)

    DOI:10.3788/AOS240652

    Topics