[1] [1] PETERSON S B, WHITACRE J F, APT J. Net air emissions from electric vehicles: the effect of carbon price and charging strategies[J]. Environmental Science & Technology, 2011, 45(5):1792-1797.

[2] [2] LIAO X, YU J, GAO L .Electrochemical study on lithium iron phosphate/hard carbon lithium-ion batteries[J]. Journal of Solid State Electrochemistry, 2012, 16(2):423-428.

[3] [3] KOJIMA T, ISHIZU T, HORIBA T, et al. Development of lithium-ion battery for fuel cell hybrid electric vehicle application[J]. Journal of Power Sources, 2009, 189(1):859-863.

[4] [4] SCROSATI B, JRGEN G. Lithium batteries: Status, prospects and future[J]. Journal of Power Sources, 2010, 195(9):2419-2430.

[5] [5] YANG L X , PENG X F , WANG B X . Numerical modeling and experimental investigation on the characteristics of molten pool during laser processing[J]. International Journal of Heat and Mass Transfer, 2001, 44(23):4465-4473.

[6] [6] CENG W M S M. Laser material processing[M]. London,UK: Springer, 2010: 21-27.

[7] [7] LEE D, PATWA R, HERFURTH H, et al.High speed remote laser cutting of electrodes for lithium-ion batteries: Anode [J].Journal of Power Sources, 2013, 240:368-380.

[8] [8] PFLEGING W. A review of laser electrode processing for development and manufacturing of lithium-ion batteries[J]. Nanophotonics, 2017, 7(3):549-573.

[9] [9] SCHMIEDER B. Laser cutting of graphite anodes for automotive lithium-ion secondary batteries: Investigations in the edge geometry and heat-affected zone[C]// Laser-based Micro- & Nanopackaging & A-ssembly Ⅵ. New York,USA: International Society for Optics and Photonics, 2012: 31-56.

[10] [10] KRONTHALER M R, SCHLOEGL F, KURFER J, et al. Laser cutting in the production of lithium ion cells[J]. Physics Procedia, 2012, 39:213-224.

[11] [11] DEMIR A G, PREVITALI B . Remote cutting of Li-ion battery electrodes with infrared and green ns-pulsed fibre lasers[J]. The International Journal of Advanced Manufacturing Technology, 2014, 75(9/12):1557-1568.

[12] [12] PFLEGING W. Laser cutting of graphite anodes for automotive lithium-ion secondary batteries: Investigations in the edge geometry and heat-affected zone[J]. Proceedings of the SPIE, 2012, 8244:23-27.

[13] [13] LEE D, PATWA R , HERFURTH H, et al. Parameter optimization for high speed remote laser cutting of electrodes for lithium-ion batte-ries[J]. Journal of Laser Applications, 2016, 28(2):022006.

[14] [14] KURFER J, WESTERMEIER M, TAMMER C, et al. Production of large-area lithium-ion cells—Preconditioning, cell stacking and quality assurance[J]. CIRP Annals-manufacturing Technology, 2012, 61(1):21-32.

[15] [15] WANG Y Sh , YANG X Ch , LIU Y J. Temperature field of laser scanning line facula[J]. Chinese Journal of Lasers, 2006, 33(7):981- 986(in Chinese).

[16] [16] LIU X X, HUANG R, YAO G, et al. Numerical simulation of the temperature field of laser butt welding of titanium alloy sheet[J]. Laser Technology, 2013, 37(5): 700-704(in Chinese).

[17] [17] MA J, ZHAO Y, ZHOU F Y, et al. Study on temperature field of materials irradiated by pulse laser based on FEM [J]. Laser & Infrared, 2015, 45 (1): 27-31(in Chinese).

[18] [18] YILBAS B S, ARIF A F M, ALEEM B J A. Laser cutting of sharp edge: Thermal stress analysis[J]. Optics & Lasers in Engineering, 2010, 48(1):10-19.

[19] [19] DENG D Sh, LIU J H, HU X Y, et al. Steady-state conditions for oxygen assisted lasox laser cutting of thick plates[J]. Laser Technology, 2003, 27(3):178-181(in Chinese).

[20] [20] NYON K Y, MOKHTAR M, ABDUL-RAHMAN R. Finite element analysis of laser inert gas cutting on Inconel 718[J]. International Journal of Advanced Manufacturing Technology, 2012, 60(9/12):995-1007.

[21] [21] YANG H L, JIN X Zh, XIU T F, et al. Numerical simulation of fiber laser welding of steel /aluminum dissimilar metals[J]. Laser Technology, 2016, 40(4):606-609(in Chinese).