[1] [1] YANG J N, WEN XUEMIN, WEI Q H, et al. Current status of red and near-infrared emission halide scintillation crystals［J］. Chinese Journal of Luminescence, 2021, 42(11):1661-1672 (in Chinese).

[2] [2] ZHAO J T, WANG H, JIN T T, et al. Research development of inorganic scintillating crystals［J］. Materials China, 2010, 29(10): 40-48 (in Chinese).

[3] [3] LI R L, ZHANG Y C, LI Q, et al. Current status and development trends of inorganic scintillation crystal sodium iodide NaI (Tl)［J］. Advanced Materials Industry, 2007, 1(9): 68-71 (in Chinese).

[4] [4] GUO L, ZHANG Y C. Application review of NaI crystal［J］. Bulletin of the Chinese Ceramic Society, 2015， 34(suplyment): 293-297 (in Chinese).

[5] [5] YANG J H, YANG K J, WU Q L, et al. A simulation research of energy response compensation for NaI detector［J］. Nuclear Electronics & Detection Technology, 2016, 36(10): 1062-1065 (in Chinese).

[6] [6] YANG C Z, LIU G X, CHEN C M, et al. Numerical simulation of radiation heat transfer characteristics of Si crystal growth furnace［J］. The Chinese J. of Process Engineering, 2018, 18(2): 280-287.

[7] [7] LECOQ P. Development of new scintillators for medical applications［J］. Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2016, 809: 130-139.

[8] [8] LI J, HE Y, SHE J J. Study on the control technique of full-Automatic crystal furnace［J］. Piezoelectrics & Acoustooptics, 2013, 35(1): 140-143 (in Chinese).

[9] [9] LI H L, WU H, WANG R. Design and study of automatic feeding Czochralski crystal furnace［J］. Piezoelectrics & Acoustooptics, 2020, 42(2): 203-206 (in Chinese).

[10] [10] XU J Y, SHEN H, JIN M, et al. Recent progress on bridgman growth of some functional crystals［J］. Journal of Synthetic Crystals, 2019, 48(6): 975-984 (in Chinese).

[11] [11] LIU W, LU J, CHEN H, et al. Study on crystal-melt interface shape of sapphire crystal growth by the KY method［J］. Journal of Crystal Growth, 2015, 431: 15-23.

[12] [12] CHALKLEY E. A multivariate emissivity dataset to facilitate infrared thermometry of high temperature materials［J］. Sensors ＆ Transducers, 2020, 241(2): 1-6.

[13] [13] CABLEA M, ZAIDAT K, GAGNOUD A, et al. Multi-crystalline silicon solidification under controlled forced convection［J］. Journal of Crystal Growth, 2015: 417.

[14] [14] ZHANG Y F, LI Z Y, MENG Q C, et al. Distribution and propagation of dislocation defects in quasi-single crystalline silicon ingots cast by the directional solidification method［J］. Solar Energy Materials and Solar Cells, 2015, 132: 1-5.

[15] [15] INOUE M, NAKANO S, HARADA H, et al. Numerical analysis of the dislocation density in multicrystalline silicon for solar cells by the vertical Bridgman process［J］. International Journal of Photoenergy, 2013, 2013: 1-8.

[16] [16] YU G J, HU X B, WANG X J, et al. Characterization of low angle grain boundary in large sapphire crystal grown by the Kyropoulos method［J］. Journal of Crystal Growth, 2014, 405: 59-63.

[17] [17] QI X J, ZHANG J, CHEN L, et al. Macroscopic defects of large Bi12GeO20 crystals grown using vertical bridgman method［J］. Journal of Inorganic Materials, 2023, 38(3): 280-287 (in Chinese).

[18] [18] YUAN J P, CHEN S X, HUANG Y H, et al. Failure of platinum crucible for melting colored glaze［J］. Special Casting & Nonferrous Alloys, 2020, 40(0): 601-604 (in Chinese).

[19] [19] WANG S K. The necessity of protective coating for platinum crucibles［J］. Fiber Glass, 1993(2): 15 (in Chinese).

[20] [20] FUNKE C, SCHMID E, GARTNER G, et al. Impurities, inclusions, and dislocations in multicrystalline silicon grown from well-mixed and poorly mixed melts［J］. Journal of Crystal Growth, 2014, 401: 732-736.