[1] UDAYAKUMAR A, GANESH A S, RAJA S et al. Effect of intermediate heat treatment on mechanical properties of SiC_f/SiC composites with BN interphase prepared by ICVI[J]. Journal of the European Ceramic Society, 1145(2011).

[2] HAN X, CHEN X, NIU X et al. Effect of interface types on the heat-resistance of Cansas-II SiC_f/SiC composites[J]. Ceramic International, 744(2022).

[3] WICAKSONO S, CHAI G B. A review of advances in fatigue and life prediction of fiber-reinforced composites[J]. Journal of Materials: Design and Applications, 179(2012).

[9] NASLAIN R R, PAILLER R J F, LAMON J L. Single-and multilayered interphases in SiC/SiC composites exposed to severe environmental conditions: an overview[J]. International Journal of Applied Ceramic Technology, 263(2010).

[10] LIU H T, YANG L W, HAN S. Research Progress on micro- mechanical property of continuous fiber-reinforced ceramic matrix composites[J]. Journal of Inorganic Materials, 711(2018).

[12] DROILLARD C, LAMON J, BOURRAT X. Strong interface in CMCs, a condition for efficient multilayered interphases[J]. Ceramic Matrix Composites-Advanced High-Temperature Structural Materials, 371(1994).

[13] DROILLARD C, LAMON J. Fracture toughness of 2-D woven SiC/SiC CVI-composites with multilayered interphases[J]. Journal of the American Ceramic Society, 849(1996).

[14] JIA Y, LI K, XUE L et al. Mechanical and electromagnetic shielding performance of carbon fiber reinforced multilayered (PyC-SiC)_n matrix composites[J]. Carbon, 299(2017).

[16] MU Y, ZHOU W, LUO F et al. Effects of BN/SiC dual-layer interphase on mechanical and dielectric properties of SiC_f/SiC composites[J]. Ceramics International, 3411(2014).

[17] BHATT R T, CHEN Y L, MORSCHER G N. Microstructure and tensile properties of BN/SiC coated Hi-Nicalon, and Sylramic SiC fiber preforms[J]. Journal of Materials Science, 3991(2002).

[18] ALMANSOUR A, MAILLET E, RAMASAMY S et al. Effect of fiber content on single tow SiC minicomposite mechanical and damage properties using acoustic emission[J]. Journal of the European Ceramic Society, 3389(2015).

[19] ZHANG Z, LIU Y, LI L et al. Modeling tensile damage and fracture behavior of fiber-reinforced ceramic-matrix minicomposites[J]. Materials, 4313(2020).

[20] BERTRAND S, FORIO P, PAILLER R et al. Hi-Nicalon/SiC minicomposites with (Pyrocarbon/SiC)_n nanoscale multilayered interphases[J]. Journal of the American Ceramic Society, 2465(1999).

[21] BUET E, SAUDER C, SORNIN D et al. Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA 3 fibres[J]. Journal of the European Ceramic Society, 179(2014).

[22] MAILLET E, GODIN N, R’MILI M et al. Damage monitoring and identification in SiC/SiC minicomposites using combined acousto-ultrasonics and acoustic emission[J]. Composites Part A: Applied Science and Manufacturing, 8(2014).

[24] CHEN X, SUN Z, LI H et al. Modeling the effect of oxidation on the residual tensile strength of SiC/C/SiC minicomposites in stressed oxidizing environments[J]. Journal of Materials Science, 3388(2020).

[25] BUET E, SAUDER C, SORNIN D et al. Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi-Nicalon S and Tyranno SA 3 fibres[J]. Journal of the European Ceramic Society, 179(2014).