[1] [1] LIU Bo,CHEN Xiao,CAI Hualin,et al.Surface acoustic wave devices for sensor applications［J］.Journal of Semiconductors,2016,37(2):021001.

[2] [2] ZHOU Xuhang,TAN Qiulin,LIANG Xiaorui,et al.Novel multilayer SAW temperature sensor for ultra-high temperature environments［J］.Micromachines,2021,12(6):643.

[3] [3] LEE J W,LEE B,KIM J W,et al.Surface acoustic wave-based infrared sensor with aluminum nitride films deposited［J］.IEEE Sensors Journal,2020,20(22):13277-13283.

[4] [4] MOHAMMAD A,SULTAN S M,TAN M L P.Design and simulation of 2D zinc oxide based SAW gas sensor for hydrogen gas sensing［C］//Kuala Lumpur:2022 IEEE International Conference on Semiconductor Electronics (ICSE), IEEE,2022:57-60.

[5] [5] LI Ling,PENG Bin,ZHU Jialiang,et al.Strain measurements with langasite SAW resonators at high temperature［J］.IEEE Sensors Journal,2020,21(4):4688-4695.

[6] [6] WANG Yu,LUO Yijie,QIU Lei.Simulation method of an expandable Lamb wave sensor network for aircraft smart skin［J］.IEEE Sensors Journal,2019,20(1):102-112.

[7] [7] JILANI S F,LEFF D,MASKAYA,et al.Static strain modelling,calibration,and measurements for high-temperature wireless SAW resonator operation［C］//Las Vegas:2020 IEEE International Ultrasonics Symposium (IUS),IEEE,2020:1-4.

[8] [8] STOUKATCH S,FRANCIS L A,DUPONT F,et al.Low-cost microfluidic device micromachining and sequential integration with SAW sensor intended for biomedical applications［J］.Sensors and Actuators A:Physical,2021,319:112526.

[9] [9] ZU Hongfei,WANG Yizhong,XIE Jiemin,et al.Surface acoustic wave mass sensor based on 128°YX-cut Lithium Niobate for thermogravimetric analysis［C］// Chicago:2014 IEEE International Ultrasonics Symposium,IEEE,2014:2544-2547.

[10] [10] NICOLAY P,CHAMBON H,BRUCKNER G,et al.A LN/Si-based SAW pressure sensor［J］.Sensors,2018,18(10):3482.

[11] [11] TANG Yongliang,XU Xiaofeng,HAN Shaobo,et al.ZnO-Al2O3 nanocomposite as a sensitive layer for high performance surface acoustic wave H2S gas sensor with enhanced elastic loading effect［J］.Sensors and Actuators B:Chemical,2020,304:127395.

[12] [12] WARNER A W,ONOE M,COQUIN G A.Determination of elastic and piezoelectric constants for crystals in class (3m)［J］.The Journal of the Acoustical Society of America,1967,42(6):1223-1231.

[13] [13] SHUAI Yao,GONG Chaoguan,BAI Xiaoyuan,et al.Fabrication of Y128-and Y36-cut lithium niobate single-crystalline thin films by crystal-ion-slicing technique［J］.Jpn J Appl Phys,2018,57(4S):04FK05.

[14] [14] XIANG Bingxi,GUAN Jing,JIAO Yang,et al.Fabrication of ion-sliced lithium niobate slabs using helium ion implantation and Cu-Sn bonding［J］.Physica Status Solidi (A),2014,211(10):2416-2420.

[15] [15] ZHAO Shuai,ZHU Rong.Flexible bimodal sensor for simultaneous and independent perceiving of pressure and temperature stimuli［J］.Advanced Materials Technologies,2017,2(11):1700183.

[16] [16] BOUCHY S,ZEDNIK R J,BLANGER P.Characterization of the elastic,piezoelectric,and dielectric properties of lithium niobate from 25 ℃ to 900 ℃ using electrochemical impedance spectroscopy resonance method［J］.Materials,2022,15(13):4716.

[19] [19] MATWE B.Overview of materials for polyimide［EB/OL］.https://www.matweb.com/search/DataSheet.aspx?MatGUID=ab35b368ab9c40848f545c35bdf1a672,2022-11-16.