[1] [1] Yang Yongqiang, Wang Di, Wu Weihui. Research progress of direct manufacturing of metal parts by selective laser melting[J]. Chinese Journal of Lasers, 2011, 38(6): 0601007. (in Chinese)

[2] [2] Su Haijun, Wei Kaichen, Guo Wei, et al. New development of laser rapid forming and its application in high performance materials processing[J]. Chinese Journal of Nonferrous Metals, 2013, 23(6): 1567-1574. (in Chinese)

[3] [3] Sun Tingting, Yang Yongqiang, Su Xubin, et al. Research of densification of 316L stainless steel powder in selective laser melting process [J]. Laser Technology, 2010, 34(4): 443-446. (in Chinese)

[4] [4] Huang Weidong, Lv Xiaowei, Lin Xin. Research progress and developing trends on laser fabrication of biomedical materials[J]. Materials China, 2011, 30(4): 1-10. (in Chinese)

[5] [5] Su Xubin, Yang Yongqiang, Yu Peng, et al. Development of porous medical implant scaffolds via laser additive manufacturing[J]. Transactions of Nonferrous Metals Society of China, 2012, 22(S1): 181-187. (in Chinese)

[6] [6] Shi Shengfeng. Microstructure and corrosion resistance of medical cobalt based alloys[D]. Hangzhou: Zhejiang University, 2006: 1-5. (in Chinese)

[7] [7] Clinical Rehabilitative Tissue Engineering Research Academic Department. Application status and development trend of medical metal materials related products[J]. Journal of Clinical Rehabilitative Tissue Engineering Research, 2010, 14(51): 9621-9624. (in Chinese)

[8] [8] Liu Jiang. Development and application of biomedical metal materials[J]. Metallic Functional Materials, 2007, 14(6): 3-40.

[9] [9] Huang Yongling. Effect of heat treatment on properties of cast Co-Cr-Mo alloy[J]. Shonghai Steel & Iron Research, 2003(4): 27-31. (in Chinese)

[10] [10] Gong Yuanyuan. Effect of heat treatment on Wear Properties of cobalt chromium alloy used in tooth[D]. Chongqing: Medical University of Chongqing, 2008: 9-16. (in Chinese)

[11] [11] Yasa E, Kempen K, Kruth J P, et al. Microstructure and mechanical properties of maraging steel 300 after selective laser melting [C]// 21st Annual International Solid Freeform Fabrication Symposium, 2010: 383-396.

[12] [12] Muterlle P V, Zendron M, Perina M, et al. Microstructure and tensile properties of metal injection molding Co-29Cr-6Mo-0.23C alloy[J]. Journal of Materials Science, 2010, 45(4):1091-1099.

[13] [13] Mori M, Yamanaka K, Chiba A. Effect of cold rolling on phase decomposition in biomedical Co-29Cr-6Mo-0.2N alloy during isothermal heat treatment at 1 073 K[J]. Journal of Alloys & Compounds, 2014, 612(7): 273-279.

[14] [14] Mantrala K M, Das M, Balla V K, et al. Additive manufacturing of Co-Cr-Mo alloy: influence of heat treatment on microstructure, tribological, and electrochemical properties[J]. Frontiers in Mechanical Engineering, 2015, 1(1): 1-2.

[15] [15] Wang Di. Study on the fabrication properties and process of stainless steel parts by selective laser melting[D]. Guangzhou: South China University of Technology, 2013: 50-71.

[16] [16] Okazaki Y. Effects of heat treatment and hot forging on microstructure and mechanical properties of Co-Cr-Mo alloy for surgical implants[J]. Materials Transactions, 2008, 49(4): 817-823.

[17] [17] Caudillo M, HerreraTrejo M, Castro M R. On carbide dissolution in an as-cast ASTM F-75 alloy[J]. Journal of Biomedical Materials Research, 2002, 59(2): 378-385.

[18] [18] Ramírez-Vidaurri L E, Castro-Román M, Herrera-Trejo M, et al. Cooling rate and carbon content effect on the fraction of secondary phases precipitate in as-cast microstructure of ASTM F75 alloy[J]. Journal of Materials Processing Technology, 2009, 209(4): 1681-1687.

[19] [19] Shortsleeve F J, Nicholson M E. Trans Am Soc Met, 1951, 43: 142.

[20] [20] Kim K Y, Ye L. Interlaminar fracture toughness of CF/PEI composites at elevated temperatures: roles of matrix toughness and fibre/matrix adhesion[J]. Composites Part A Applied Science & Manufacturing, 2004, 35(4): 477-487.