[1] [1] MO M Z, TAN Y, CAO B, et al. Fracture analysis on the faucet valve of HPb59-1［J］. Applied Mechanics and Materials, 2013, 401:163-166.

[2] [2] LEI I L, NG D Q, SABLE S S, et al. Evaluation of lead release potential of new premise plumbing materials［J］. Environmental Science and Pollution Research, 2018, 25(28):27971-27981.

[3] [3] ELFLAND C, SCARDINA P, EDWARDS M. Lead-contaminated water from brass plumbing devices in new buildings［J］. Journal American Water Works Association, 2010, 102(11):66-76.

[4] [4] DUDI A, SCHOCK M, MURRAY N, et al. Lead leaching from inline brass devices: A critical evaluation of the existing standard［J］. Journal American Water Works Association, 2005, 97(8):66-78.

[5] [5] ZHANG J H, CHEN Y, XU B, et al. Effect of surface texture on wear reduction of the tilting cylinder and the valve plate for a high-speed electro-hydrostatic actuator pump［J］. Wear, 2018, 414:68-78.

[6] [6] ZHANG T, LIU H X, KANG C, et al. Ultrasonic cavitation erosion behavior and mechanism of Pb-brass alloy in different liquids［J］. Surface Technology, 2018, 47(1):109-115(in Chinese).

[7] [7] QIAO J Zh，TIAN B H，SONG K X, et al. Erosion behavior of nickel-aluminium bronze alloy with Ti addition under artificial sea water environment［J］. Heat Treatment of Metals, 2018,43(5) :55-59(in Chinese).

[8] [8] LI Z Y, WANG Q Q, CUI Q W, et al. Optimization of nickel-tungsten carbide composite plating process and corrosion resistance of coating［J］. Electropating & Finishing, 2017(5):4-7(in Chinese).

[9] [9] QIU X W, LIU C G, ZHANG Y P. Microstructure and property of Al2CoCrCuFeNixTi high entropy alloy coatings prepared by laser cladding［J］. Laser & Optoelectronics Progress, 2017,54(5):051404(in Chinese).

[10] [10] ZHOU Z, BHAMARE S, RAMAKRISHNAN G, et al. Thermal relaxation of residual stress in laser shock peened Ti-6Al-4V alloy［J］. Surface & Coatings Technology, 2012, 206(22):4619-4627.

[11] [11] ZHU Y, FU J, ZHENG C. et al. Influence of laser shock peening on morphology and mechanical property of Zr-based bulk metallic glass［J］. Optics & Lasers in Engineering, 2015, 74:75-79.

[12] [12] GUO Y B, CASLARU R. Fabrication and characterization of micro dent arrays produced by laser shock peening on titanium Ti-6Al-4V surfaces［J］. Journal of Materials Processing Technology, 2011, 211(4):729-736.

[13] [13] SUN R, LI L, ZHU Y, et al. Dynamic response and residual stress fields of Ti6Al4V alloy under shock wave induced by laser shock peening［J］. Modelling & Simulation in Materialsence & Engineering, 2017, 25(6):1-16.

[14] [14] ZHANG L, LU J Z, ZHANG Y K, et al. Effects of laser shock processing on morphologies and mechanical properties of ANSI304 stainless steel weldments subjected to cavitation erosion［J］. Materials, 2017, 10(3):292-294.

[15] [15] SHADANGI Y, CHATTOPADHYAY K, RAI S B, et al. Effect of laser shock peening on microstructure, mechanical properties and corrosion behavior of interstitial free steel［J］. Surface & Coatings Technology, 2015, 280:216-224.

[16] [16] PETAN L, OCANA JL, GRUM J. Effects of laser shock peening on the surface integrity of 18% Ni maraging steel［J］. Strjniski Vestnik-Journal of Mechanical Engineering, 2016, 62(5):291-298.

[17] [17] LI X Y, YAN Y G, MA L, et al. Cavitation erosion and corrosion behavior of copper-manganese-aluminum alloy weldment［J］. Materials Science & Engineering, 2004, A382(1):82-89.

[18] [18] DUAN Ch H，ZHOU J J，PEI Y T, et al. Study on residual stress distribution of TC17 titanium alloy by one-side and two-side laser shock peening［J］ . Laser Technology, 2019, 43(2): 161-167(in Chinese).

[19] [19] KRELLA A, CZYZNIEWSKI A. Influence of the substrate hardness on the cavitation erosion resistance of TiN coating［J］. Wear, 2007, 263(1/6):395-401.

[20] [20] HUA Y Q, CAI Zh R, CHEN R F, et al. Experiment and numerical simulation of overlapping laser shock processing in TC4 titanium alloy［J］. Laser Technology, 2010，34(5):632-635(in Chinese).

[21] [21] ZHOU J Zh, YANG J Ch, ZHOU M, et al. Experimental study on the effects of overlay properties on laser-induced shock waves［J］. Chinese Journal of Lasers, 2002, 29(11):1041-1044(in Chinese).

[22] [22] LU J Z, WU L J, SUN G F, et al. Microstructural response and grain refinement mechanism of commercially pure titanium subjected to multiple laser shock peening impacts［J］. Acta Materialia, 2017, 127:252-266.

[23] [23] TAN Y, WU G, YANG J M, et al. Laser shock peening on fatigue crack growth behavior of aluminium alloy［J］. Fatigue & Fracture of Engineering Materials & Structures, 2010, 27(8):649-656.

[24] [24] AL-OBAID Y F. The effect of shot peening on stress corrosion cracking behaviour of 2205-duplex stainless steel［J］. Engineering Fracture Mechanics, 1995, 51(1):19-25.

[25] [25] LU J Z, LUO K Y, ZHANG Y K, et al. Grain refinement of LY2 aluminum alloy induced by ultra-high plastic strain during multiple laser shock processing impacts［J］. Acta Materialia, 2010, 58(11):3984-3994.

[26] [26] SANO Y, OBATA M, KUBO T, et al. Retardation of crack initiation and growth in austenitic stainless steels by laser peening without protective coating［J］. Materials Science & Engineering, 2006, A417(1):334-340.