Journal of Advanced Dielectrics, Volume. 15, Issue 1, 2450012(2025)

Increase of Curie point of BaTiO3 ceramics by stoichiometry, point defects and doping processing

Jianquan Qi*, Hui Fang, Jiang Wang, Xiumei Han, Zizhou Liang, Jin Ma, Xunzhong Shang, Liuting Gu, and Wanping Chen
References(25)

[1] J. Shieh, J. H. Yeh, Y. C. Shu, J. H. Yen. Hysteresis behaviors of barium titanate single crystals based on the operation of multiple 90∘ switching systems. Mater. Sci. Eng. B., 161, 50(2009).

[2] K. Suzuki, K. Kijima. Optical band gap of barium titanate nanoparticles prepared by RF-plasma chemical vapor deposition. Jpn. J. Appl. Phys., 44, 2081(2005).

[3] J. Q. Qi, B. B. Liu, H. Y. Tian, H. Zou, Z. X. Yue, L. T. Li. Dielectric properties of barium zirconate titanate (BZT) ceramics tailored by different donors for high voltage applications. Solid State Sci., 14, 1520(2012).

[4] Q. Li, J. Q. Qi, Y. L. Wang, Z. L. Gui, L. T. Li. Improvement of temperature-stable BaTiO3-based dielectrics by addition of Li2CO3 and Co2O3. J. Eur. Ceram. Soc., 21, 2217(2001).

[5] J. Q. Qi, Z. L. Gui, Y. L. Wang, Q. Zhu, Y. Wu, L. T. Li. The PTCR effect in BaTiO3 ceramics modified by donor dopant. Ceram. Int., 28, 141(2002).

[6] U. S. Shenoy, D. K. Bhat. Vanadium-doped BaTiO3 as high performance thermoelectric material: Role of electronic structure engineering. Mater. Today Chem., 18, 100384(2020).

[7] A. Jain, Y. G. Wang, L. N. Shi. Recent developments in BaTiO3 based lead-free materials for energy storage applications. J. Alloys Comp., 928, 167066(2022).

[8] B. G. Yust, N. Razavi, F. Pedraza, Z. Elliott, A. T. Tsin, D. K. Sardar. Enhancement of nonlinear optical properties of BaTiO3 nanoparticles by the addition of silver seeds. Opt. Express, 20, 26511(2012).

[9] F. Zimmermann, M. Voigts, C. Weil, R. Jakoby, P. Wang, W. Menesklou, E. Ivers-Tiffée. Investigation of barium strontium titanate thick films for tunable phase shifters. J. Eur. Ceram. Soc., 21, 2019(2001).

[10] S. K. Ray, J. Cho, J. Hur. A critical review on strategies for improving efficiency of BaTiO3-based photocatalysts for wastewater treatment. J. Environ. Manage., 290, 112679(2021).

[11] J. Wu, Q. Xu, E. Lin, B. Yuan, N. Qin, S. K. Thatikonda, D. Bao. Insights into the role of ferroelectric polarization in piezocatalysis of nanocrystalline BaTiO3. ACS Appl. Mater. Interfaces, 10, 17842(2018).

[12] L. Geng, Y. Qian, W. Song, L. Bao. Enhanced tribocatalytic pollutant degradation through tuning oxygen vacancy in BaTiO3 nanoparticles. Appl. Surf. Sci., 637, 157960(2023).

[13] H. Kabra, H. A. Deore, P. Patil. Review on advanced piezoelectric materials (BaTiO3, PZT). J. Emerg. Technol. Innov. Res., 6, 950(2019).

[14] H. Takahashi, Y. Numamoto, J. Tani, S. Tsurekawa. Piezoelectric properties of BaTiO3 ceramics with high performance fabricated by microwave sintering. J. Appl. Phys., 45, 7405(2006).

[15] L. Dong, D. S. Stone, R. S. Lakes. Enhanced dielectric and piezoelectric properties of xBaZrO3-(1−x)3 ceramics. J. Appl. Phys., 111, 084107(2012).

[16] J. Q. Qi, L. T. Li, Y. L. Wang, Z. L. Gui. Preparation of nanoscaled BaTiO3 powders by DSS method near room temperature under normal pressure. J. Cryst. Growth, 260, 551(2004).

[17] J. Q. Qi, X. H. Wang, H. Zhang, H. Zou, Z. B. Wang, H. L. W. Chan. Direct synthesis of barium zirconate titanate (BZT) nanoparticles at room temperature and sintering of their ceramics at low temperature. Ceram. Int., 40, 2747(2014).

[18] T. X. Xu et al. Electrical Ceramics, 149(1993).

[19] D. Meyerhofer. Transition to the ferroelectric state in barium titanate. Phys. Rev., 112, 413(1958).

[20] J. Q. Qi, L. Sun, Y. Wang, W. P. Chen, P. Du, Y. G. Xu, L. T. Li, C. W. Nan, H. LI, W. Chan. Low-temperature synthesis and analysis of barium titanate nanoparticles with excess barium. Adv. Powder Technol., 22, 401(2011).

[21] J. Q. Qi, L. Sun, Y. Wang, W. P. Chen, P. Du, Y. G. Xu, L. T. Li, C. W. Nan, H. L. W. Chan. Excess titanium in barium titanate nanoparticles directly synthesized from solution. J. Phys. Chem. Solids, 71, 1676(2010).

[22] R. K. Sharma, N. H. Chan, D. M. Smyth. Solubility of TiO2 in BaTiO3. J. Am. Ceram. Soc., 64, 448(1981).

[23] Y. H. Hu, M. P. Harmer, D. M. Smyth. Solubility of BaO in BaTiO3. J. Am. Ceram. Soc., 68, 372(1985).

[24] W. P. Chen et al. A strong correlation of crystal structure and Curie point of barium titanate ceramics with Ba/Ti ratio of precursor composition. Physica B: Condens. Matter, 403, 660(2008).

[25] J. Q. Qi, W. P. Chen, Y. J. Wu, L. T. Li. Improvement of the PTCR effect in Ba1−xSrxTiO3 semiconducting ceramics by doping of Bi2O3 vapor during sintering. J. Am. Ceram. Soc., 81, 437(1998).

Tools

Get Citation

Copy Citation Text

Jianquan Qi, Hui Fang, Jiang Wang, Xiumei Han, Zizhou Liang, Jin Ma, Xunzhong Shang, Liuting Gu, Wanping Chen. Increase of Curie point of BaTiO3 ceramics by stoichiometry, point defects and doping processing[J]. Journal of Advanced Dielectrics, 2025, 15(1): 2450012

Download Citation

EndNote(RIS)BibTexPlain Text
Save article for my favorites
Paper Information

Category: Research Articles

Received: Mar. 28, 2024

Accepted: May. 9, 2024

Published Online: Feb. 18, 2025

The Author Email: Qi Jianquan (1000632@neuq.edu.cn)

DOI:10.1142/S2010135X24500127

Topics