[1] Telasang G, Dutta Majumdar J, Padmanabham G. et al. Effect of laser parameters on microstructure and hardness of laser clad and tempered AISI H13 tool steel[J]. Surface and Coatings Technology, 258, 1108-1118(2014).

[2] Liu Q C, Janardhana M, Hinton B et al. Laser cladding as a potential repair technology for damaged aircraft components[J]. International Journal of Structural Integrity, 2, 314-331(2011). http://www.emeraldinsight.com/doi/full/10.1108/17579861111162914

[3] Kattire P, Paul S, Singh R et al. Experimental characterization of laser cladding of CPM 9V on H13 tool steel for die repair applications[J]. Journal of Manufacturing Processes, 20, 492-499(2015). http://www.sciencedirect.com/science/article/pii/S1526612515000638

[4] Mokadem S, Bezençon C, Hauert A et al. Laser repair of superalloy single crystals with varying substrate orientations[J]. Metallurgical and Materials Transactions A, 38, 1500-1510(2007). http://link.springer.com/article/10.1007/s11661-007-9172-z

[5] Dai X Q, Zhou S F, Wang M F et al. Microstructure evolution of phase separated Fe-Cu-Cr-C composite coatings by laser induction hybrid cladding[J]. Surface and Coatings Technology, 324, 518-525(2017).

[6] Sun G F, Shen X T, Wang Z D et al. Laser metal deposition as repair technology for 316L stainless steel: influence of feeding powder compositions on microstructure and mechanical properties[J]. Optics & Laser Technology, 109, 71-83(2019). http://www.onacademic.com/detail/journal_1000040427282010_d0b3.html

[7] Song L J, Zeng G C, Xiao H et al. Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders[J]. Journal of Manufacturing Processes, 24, 116-124(2016). http://www.sciencedirect.com/science/article/pii/S1526612516300986

[8] Kang N, Ma W Y, Li F H et al. Microstructure and wear properties of selective laser melted WC reinforced 18Ni-300 steel matrix composite[J]. Vacuum, 154, 69-74(2018). http://www.sciencedirect.com/science/article/pii/S0042207X18303191

[9] Babout L, Brechet Y, Maire E et al. On the competition between particle fracture and particle decohesion in metal matrix composites[J]. Acta Materialia, 52, 4517-4525(2004). http://www.sciencedirect.com/science/article/pii/S1359645404003477

[10] Li F Q, Feng X Y, Chen Y B. Influence of WC content on microstructure of WC/Ni60A laser cladding layer[J]. Chinese Journal of Lasers, 43, 0403009(2016).

[11] Liu H X, Dong T, Zhang X W et al. Microstructure and cutting performance of WC/Co50/Al cemented carbide coated tools fabricated by laser cladding process[J]. Chinese Journal of Lasers, 44, 0802002(2017).

[12] Luo K Y, Xu X, Zhao Z et al. Microstructural evolution and characteristics of bonding zone in multilayer laser cladding of Fe-based coating[J]. Journal of Materials Processing Technology, 263, 50-58(2019). http://www.onacademic.com/detail/journal_1000040429990510_8f94.html

[13] Tong X, Li F H, Kuang M et al. Effects of WC particle size on the wear resistance of laser surface alloyed medium carbon steel[J]. Applied Surface Science, 258, 3214-3220(2012). http://www.sciencedirect.com/science/article/pii/S0169433211018241

[14] Zhuang Q Q, Zhang P L, Li M C et al. Microstructures and wear resistance properties of Ni-Ti-Si coatings on copper alloy surface by laser cladding[J]. Chinese Journal of Lasers, 44, 1102002(2017).

[15] Yang J X, Zhang J Q, Chang W Q et al. High temperature dry sliding friction and wear performance of laser cladding WC/Ni composite coating[J]. Journal of Materials Engineering, 44, 110-116(2016).