[1] Belyakova E G, Kogan B S, Pushin V G et al. Features of the structure of carbon fibres used as filler for carbon-fibre-reinforced plastics[J]. Fibre Chemistry, 42, 171-174(2010).

[2] Kolobkov A S, Malakhovskii S S. Development of carbon fiber production technologies. A review[J]. Fibre Chemistry, 52, 1-5(2020).

[3] Bai Y P, Wang Z, Feng L Q. Chemical recycling of carbon fibers reinforced epoxy resin composites in oxygen in supercritical water[J]. Materials & Design, 31, 999-1002(2010).

[4] Shi F H, Dai Z S, Zhang B Y. Characterization of surface properties of carbon fibers and interfacial properties of carbon fibers reinforced matrix composites[J]. Journal of Aeronautical Materials, 30, 43-47(2010).

[5] Deng H, Gao J P, Bao J W. Preparation and mechanical properties of aligned discontinuous carbon fiber composites[J]. Journal of Aeronautical Materials, 38, 69-74(2018).

[6] Bao J W, Jiang S C, Zhang D J. Current status and trends of aeronautical resin matrix composites reinforced by carbon fiber[J]. Science & Technology Review, 36, 52-63(2018).

[7] Ma X K, Wang R, Hou J F et al. Application analysis of CFRP based on automobile lightweight[J]. New Chemical Materials, 48, 223-226(2020).

[8] Wang Y. Progress of advanced composite materials in unmanned aerial vehicles[J]. Modern Industrial Economy and Informationization, 11, 150-151(2021).

[9] Hou H L, Hao H L, Lü R H et al. Parameter optimization and performance test of laser cutting of carbon fiber reinforced plastics based on response surface method[J]. Laser & Optoelectronics Progress, 59, 1314005(2022).

[10] Gu Y G, Niu J, Yang J et al. Application of laser in the medical field[J]. Chinese Optics, 16, 283-295(2023).

[11] Xiao J, Ren G, Xia H J et al. Influence of irradiation time sequence of combined laser on damage effectiveness[J]. Chinese Journal of Lasers, 46, 1102009(2019).

[12] Wang X S, Huang Y K, Li C Y et al. Numerical simulation and experimental study on picosecond laser ablation of stainless steel[J]. Optics Laser Technology, 127, 106150(2020).

[13] Liu Y, Tang W, Shao J F et al. Study on damage effect of continuous laser on steel cylinder[J]. Laser & Infrared, 51, 89-94(2021).

[14] Sha Y C, Li Z W, Jia Z C et al. Comparison of 20- to 1000-Hz pulsed laser and continuous laser ablation of single-crystal germanium wafers[J]. Optical Engineering, 62, 036109(2023).

[15] Zhang Z, Song Q, Zhang K P et al. Simulation and experimental research on flat top femtosecond laser grooving of silicon wafer[J]. Chinese Journal of Lasers, 50, 2002202(2023).

[16] Yang Y, Tian X C, Ma Z et al. Laser irradiation behavior of carbon fiber epoxy resin composites with laminar structure[J]. Crystals, 12, 1767(2022).

[17] Zhao J H, Ji P F, Lin G et al. Experimental probe into the femtosecond laser ablation thresholds in carbon fiber reinforced polymer and assessment of the measurement theories[J]. Polymer Composites, 44, 5232-5246(2023).

[18] Di C X, Sun Y J, Wang F et al. Temperature field simulation of laser cut carbon fiber reinforced plastics[J]. Laser Technology, 44, 628-632(2020).

[19] Chen S J. Thermal response behavior of carbon fiber epoxy laminates with different thickness[D], 27-41(2022).

[20] Liu J. Thermal-mechanical effect during ms pulsed laser heating brittle material[D], 5-10(2011).

[21] Li Q Y[M]. Damage effects of vehicles irradiated by intense lasers, 24-25(2012).

[22] Xu H B, Hu J, Yu Z. Absorption behavior analysis of carbon fiber reinforced polymer in laser processing[J]. Optical Materials Express, 5, 2330-2336(2015).

[23] Zhou B K, Gao Y Z, Chen T R et al[M]. Principle of laser, 67-81(2014).

[24] Herr N C, Gonzales A E, Perram G P. Kinetics, evolving thermal properties, and surface ignition of carbon fiber reinforced epoxy composite during laser-induced decomposition[J]. Polymer Degradation and Stability, 152, 147-161(2018).

[25] Oh S, Lee I, Park Y B et al. Investigation of cut quality in fiber laser cutting of CFRP[J]. Optics & Laser Technology, 113, 129-140(2019).

[26] Li Z L, Zheng H Y, Lim G C et al. Study on UV laser machining quality of carbon fibre reinforced composites[J]. Composites Part A: Applied Science and Manufacturing, 41, 1403-1408(2010).

[27] Meng X P, Zhang Y Q, Cai S Y et al. Optimal design of UAV composite landing gear[J]. Equipment Manufacturing Technology, 110-114(2022).

[28] Dai H L. Design and strength analysis of 10 kg civilian composite fixed-wing UAV[D], 58(2019).

[29] Zhong J L, Ma D W, Le G G. Analysis and optimization for composite tail of an unmanned aerial vehicle[J]. Ordnance Material Science and Engineering, 36, 52-55(2013).