[1] HENTSCHEL M, KIENBERGER R, SPIELMANN C et al. Attosecond metrology[J]. Nature, 414, 509-513(2001).

[2] GOHLE C, UDEM T, HERRMANN M et al. A frequency comb in the extreme ultraviolet[J]. Nature, 436, 234-237(2005).

[3] MIAO J, ISHIKAWA T, ROBINSON I K et al. Beyond crystallography: diffractive imaging using coherent X-ray light sources[J]. Science, 348, 530-535(2015).

[4] DUMITRU G, ROMANO V, WEBER H P et al. Femtosecond ablation of ultrahard materials[J]. Applied Physics A, 74, 729-739(2002).

[5] LUTEY A H A, GEMINI L, ROMOLI L et al. Towards laser-textured antibacterial surfaces[J]. Scientific Reports, 8, 10112(2018).

[6] VOROBYEV A Y, GUO C. Direct femtosecond laser surface nano/microstructuring and its applications[J]. Laser & Photonics Reviews, 7, 385-407(2013).

[7] RUSSBUELDT P, MANS T, WEITENBERG J et al. Compact diode-pumped 1.1 kW Yb:YAG Innoslab femtosecond amplifier[J]. Optics Letters, 35, 4169-4171(2010).

[8] SALTARELLI F, GRAUMANN I, LANG L et al. 350 W average-power SESAM-mode locked ultrafast thin-disk laser[C](2019).

[9] FATTAHI H, ALISMAIL A, WANG H et al. High-power, 1 ps, all-Yb:YAG thin-disk regenerative amplifier[J]. Optics Letters, 41, 1126-1129(2016).

[10] LI Feng. Chirped pulse amplification and transmission technology of high energy femtosecond fiber for industrial Processing applications[D](2018).

[11] SANGLA D, MARTIAL I, AUBRY N et al. High power laser operation with crystal fibers[J]. Applied Physics B, 97, 263-273(2009).

[12] XU Xiaodong. Single crystal fiber-material of choice for high power lasers[J]. Journal of Artificial Crystal, 49, 1952(2020).

[13] WANG T, ZHANG J, ZHANG N et al. Single crystal fibers: diversified functional crystal material[J]. Advanced Fiber Materials, 1, 163-187(2019).

[14] LESPARRE F, GOMES J T, DÊLEN X et al. Yb: YAG single-crystal fiber amplifiers for picosecond lasers using the divided pulse amplification technique[J]. Optics Letters, 41, 1628-1631(2016).

[15] SHEN Y H. Sapphire fiber thermometer ranging from the room temperature to 1 800 ℃[J]. Acta Optica Sinica, 20, 83-87(2000).

[16] YE Linhua, ZHOU Xiaofen, SONG Li et al. Preparation and properties of Pr3+, Ce3+: YAG fiber for LED white light source[J]. Acta Photonica Sinica, 38, 2059-2062(2009).

[17] WANG Yalan, WANG Qing. Research progress in single-crystal fiber amplifiers[J]. Laser & Optoelectronics Progress, 55, 100006(2018).

[18] CZOCHRALSKI J. Ein neues verfahren zur messung der kristallisationsgeschwindigkeit der metalle[J]. Zeitschrift für physikalische Chemie, 92, 219-221(1918).

[19] FEJER M, BYER R, FEIGELSON R et al. Growth and characterization of single crystal refractory oxide fibers[C], 320, 50-55(1982).

[20] ANDREETA M, HERNANDES A C. Laser-heated pedestal growth of oxide fibers[M]. Springer Handbook of Crystal Growth, 393-432(2010).

[21] YOON D H, YONENAGA I, FUKUDA T et al. Crystal growth of dislocation-free LiNbO3 single crystals by micro pulling down method[J]. Journal of Crystal Growth, 142, 339-343(1994).

[22] FUKUDA T, CHANI V I. CrystalsShaped: growth by micro-pulling-down technique[M]. Springer Science & Business Media(2007).

[23] WANG T, ZHANG J, ZHANG N et al. The characteristics of high-quality Yb:YAG single crystal fibers grown by a LHPG method and the effects of their discoloration[J]. RSC advances, 9, 22567-22575(2019).

[24] SOLEIMANI N, PONTING B, GEBREMICHAEL E et al. Coilable single crystals fibers of doped-YAG for high power laser applications[J]. Journal of Crystal Growth, 393, 18-22(2014).

[25] MAXWELL G, SOLEIMANI N, PONTING B et al[M]. Coilable single crystal fibers of doped-YAG for high power laser applications, 8733, 87330T(2013).

[26] NIE C D, BERA S, HARRINGTON J A. Growth of single-crystal YAG fiber optics[J]. Optics Express, 24, 15522-15527(2016).

[27] DUBINSKII M, ZHANG J, FROMZEL V et al. Low-loss 'crystalline-core/crystalline-clad' (C4) fibers for highly power scalable high efficiency fiber lasers[J]. Optics Express, 26, 5092-5101(2018).

[28] KIM W, SHAW B, BAYYA S et al. Cladded single crystal fibers for high power fiber lasers[C], 9958, 117-124(2016).

[29] SHAW L B, BAYYA S, KIM W et al. Fabrication of cladded single crystal fibers for all-crystalline fiber lasers[C], SoW2H. 3(2018).

[30] VERONESI S, ZHANG Y, TONELLI M et al. Spectroscopy and efficient laser emission of Yb3+: LuAG single crystal grown by μ-PD[J]. Optics Communications, 285, 315-321(2012).

[31] LEBBOU K, PERRODIN D, CHANI V I et al. Fiber single-crystal growth from the melt for optical applications[J]. Journal of the American Ceramic Society, 89, 75-80(2006).

[32] PAUWELS K, DUJARDIN C, GUNDACKER S et al. Single crystalline LuAG fibers for homogeneous dual-readout calorimeters[J]. Journal of Instrumentation, 8, P09019(2013).

[33] XU X, LEBBOU K, MORETTI F et al. Ce-doped LuAG single-crystal fibers grown from the melt for high-energy physics[J]. Acta Materialia, 67, 232-238(2014).

[34] NOVOSELOV A, KAGAMITANI Y, KASAMOTO T et al. Crystal growth and characterization of Yb3+-doped Gd3Ga5O12[J]. Materials Research Bulletin, 42, 27-32(2007).

[35] LEE J, YOSHIKAWA A, KAIDEN H et al. Microstructure of Y2O3 doped Al2O3/ZrO2 eutectic fibers grown by the micro-pulling-down method[J]. Journal of Crystal Growth, 231, 179-185(2001).

[36] FUKABORI A, CHANI V, KAMADA K et al. Growth of Yb-doped Y2O3, Sc2O3, and Lu2O3 single crystals by the micro-pulling-down technique and their optical and scintillation characterization[J]. Journal of Crystal Growth, 352, 124-128(2012).

[37] YOSHIKAWA A, HASEGAWA K, LEE J et al. Phase identification of Al2O3/RE3Al5O12 and Al2O3/REAlO3 (RE= Sm-Lu, Y) eutectics[J]. Journal of Crystal Growth, 218, 67-73(2000).

[38] SOTTILE A, ZHANG Z, VERONESI S et al. Visible laser operation in a Pr3+: LiLuF4 monocrystalline fiber grown by the micro-pulling-down method[J]. Optical Materials Express, 6, 1964-1972(2016).

[39] SANTO A, RANIERI I, BRITO G et al. Growth of LiYF4 single-crystalline fibres by micro-pulling-down technique[J]. Journal of crystal growth, 275, 528-533(2005).

[40] TOTSKA D, YANAGIDA T, FUJIMOTO Y et al. Study on scintillation properties of rare earth (Pr, Nd and Tm) activated Lu2SiO5[C], 1292-1295(2010).

[41] FUJIMOTO Y, YANAGIDA T, WAKAHARA S et al. Growth and scintillation properties of Ce3+-doped (Y1‐xGdx) AlO3 crystals[J]. Physica Status Solidi C, 9, 2259-2262(2012).

[42] FARHI H, BELKAHLA S, LEBBOU K et al. BGO fibers growth by μ-pulling down technique and study of light propagation[J]. Physics Procedia, 2, 819-825(2009).

[43] INABA S, MACHIDA T, ASAKAWA H et al. Effects of temperature gradient on growth of SrB4O7 crystals by the micro-pulling-down method[J]. Transactions of the Materials Research Society of Japan, 42, 123-126(2017).

[44] KAMADA K, TAKIDA Y, MINAMIDE H et al. Growth of N-benzyl-2-methyl-4-nitroaniline (BNA) single crystal fibers by micro-pulling down method[J]. Journal of Crystal Growth, 452, 162-165(2016).

[45] LELII F D, JUN S, PIRZIO F et al. Laser investigation of Yb: YLF crystals fabricated with the micro-pulling-down technique[J]. Applied Optics, 57, 2223-2226(2018).

[46] VERONESI S, ZHANG Y, TONELLI M et al. Efficient laser emission in Ho 3+:LiLuF4 grown by micro-Pulling Down method[J]. Optics Express, 20, 18723-18731(2012).

[47] PIRZIO F, JUN S, TACCHINI S et al. Multi-watt amplification in a birefringent Yb:LiLuF4 single crystal fiber grown by micro-pulling-down[J]. Optics Letters, 44, 4095-4098(2019).

[48] YUAN Dongsheng, JIA Zhitai, SHU Jun et al. Development of micro-pulling-down equipment for crystal fiber growth and YAG single crystal growth[J]. Journal of Synthetic Crystals, 43, 1317-1322(2014).

[49] XU J, SONG Q, LIU J et al. The micro-pulling-down growth of Eu3+-doped Y3Al5O12 and Y3ScAl4O12 crystals for red luminescence[J]. Optical Materials, 109, 110388(2020).

[50] ZHAO Y, WANG L, CHEN W et al. 35 W continuous-wave Ho: YAG single-crystal fiber laser[J]. High Power Laser Science and Engineering, 8, 02000e25(2020).

[51] KURLOV V N, STRYULOV D O, SHIKUNOVA I A. Growth of sapphire and oxide eutectic fibers by the EFG technique[C], 673, 012017(2016).

[52] TIAN X, WANG Z, DING M et al. Recent progress in cerium-based nanomaterials for electrochemical biosensors[J]. International Journal of Electrochemical Science, 15, 330-310(2020).

[53] HUANG K Y, HSU K Y, JHENG D Y et al. Low-loss propagation in Cr4+: YAG double-clad crystal fiber fabricated by sapphire tube assisted CDLHPG technique[J]. Optics Express, 16, 12264-12271(2008).

[54] LAI C C, GAO W T, NGUYEN D H et al. Toward single-mode active crystal fibers for next-generation high-power fiber devices[J]. ACS Applied Materials & Interfaces, 6, 13928-13936(2014).

[55] MYERS J D, KIM W, SHAW L B et al. Development of thin film claddings for single crystal optical fiber[C](2018).

[56] DE VIDO M, WOJTUSIAK A, ERTEL K. High resolution absorption measurements at the zero-phonon line of Yb: YAG at low temperatures[C](2020).

[57] KOERNER J, VORHOLT C, LIEBETRAU H et al. Measurement of temperature-dependent absorption and emission spectra of Yb:YAG, Yb:LuAG, and Yb:CaF2 between 20 ℃ and 200 ℃ and predictions on their influence on laser performance[J]. Journal of the Optical Society of America B, 29, 2493-2502(2012).

[58] ZAOUTER Y, MARTIAL I, AUBRY N et al. Direct amplification of ultrashort pulses in μ-pulling-down Yb: YAG single crystal fibers[J]. Optics Ltters, 36, 748-750(2011).

[59] DÉLEN X, PIEHLER S, DIDIERJEAN J et al. 250 W single-crystal fiber Yb: YAG laser[J]. Optics Letters, 37, 2898-2900(2012).

[60] DÉLEN X, ZAOUTER Y, MARTIAL I et al. Yb: YAG single crystal fiber power amplifier for femtosecond sources[J]. Optics Letters, 38, 109-111(2013).

[61] KIENEL M, MÜLLER M, DEMMLER S et al. Coherent beam combination of Yb: YAG single-crystal rod amplifiers[J]. Optics Letters, 39, 3278-3281(2014).

[62] LESPARRE F, GOMES J T, DÉLEN X et al. High-power Yb: YAG single-crystal fiber amplifiers for femtosecond lasers in cylindrical polarization[J]. Optics Letters, 40, 2517-2520(2015).

[63] MARKOVIC V, ROHRBACHER A, HOFMANN P et al. 160 W 800 fs Yb: YAG single crystal fiber amplifier without CPA[J]. Optics Epress, 23, 25883-25888(2015).

[64] XU Y, PENG Z, SHI Y et al. Compact 80 W, 1 MHz femtosecond chirped pulse amplification laser system based on a Yb-doped fiber and a Yb: YAG thin Rod[J]. IEEE Photonics Journal, 14, 1-6(2022).

[65] WANG S, CONG Z, LIU J et al. High-efficiency 940-and 969-nm brightness-maintaining wavelength-multiplexed LD-pumped 240-W thin-rod Yb: YAG amplifier[J]. Optics Letters, 47, 2113-2116(2022).

[66] LI F, YANG Z, LV Z et al. Hundred micro-joules level high power chirped pulse amplification of femtosecond laser based on single crystal fiber[J]. IEEE Photonics Journal, 9, 1-7(2017).

[67] LI F, WANG N, YANG Z et al. High-energy femtosecond laser system based on a fiber laser seeder, Yb: YAG single crystal fiber and chirped volume Bragg grating[J]. Laser Physics Letters, 17, 065103(2020).

[68] WANG N N, LI F, WANG X L et al. Development of a 67.8 W, 2.5 ps ultrafast chirped-pulse amplification system based on single-crystal fiber amplifiers[J]. Applied Optics, 59, 8106-8110(2020).

[69] LI F, YANG Z, LV Z et al. Hybrid CPA system comprised by fiber-silicate glass fiber-single crystal fiber with femtosecond laser power more than 90 W at 1 MHz[J]. Optics & Laser Technology, 129, 106291(2020).