[1] [1] Lu Bingheng, Li Dichen. Development of the additive manufacturing (3D printing) technology[J]. Machine Building & Automation, 2013, 42(4): 1-4.

[2] [2] Liu Yantao, Gong Xinyong, Liu Mingkun, et al.. Microstructure and tensile properties of laser melting deposited Ti2AlNb-based alloy [J]. Chinese J Lasers, 2014, 41(1): 0103005.

[3] [3] Dai Donghua, Gu Dongdong, Li Yali, et al.. Numerical simulation of metallurgical behavior of melt pool during selective laser melting of W-Cu composite powder system[J]. Chinese J Lasers, 2013, 40(11): 1103001.

[4] [4] Wang Huaming, Zhang Shuquan, Wang Xiangming. Progress and challenges of laser direct manufacturing of large titanium structural components[J]. Chinese J Lasers, 2009, 36(12): 3204-3209.

[5] [5] Wang Di, Liu Ruicheng, Yang Yongqiang. Clearance design and process optimization of non-assembly mechanisms fabricated by selective laser melting[J]. Chinese J Lasers, 2014, 41(2): 0203004.

[6] [6] Song Changhui, Yang Yongqiang, Wang Yunda, et al.. Research on process and property of CoCrMo alloy directly manufactured by selective laser melting[J]. Chinese J Lasers, 2014, 41(6): 0603001.

[7] [7] Yang Yongqiang, Luo Ziyi, Su Xubin, et al.. Study on process and effective factors of stainless steel thin-wall parts manufactured by selective laser melting[J]. Chinese J Lasers, 2011, 38(1): 0103001.

[8] [8] Ding Li, Li Huaixue, Wang Yudai, et al.. Heat treatment on microstructure and tensile strength of 316 stainless steel by selective laser melting[J]. Chinese J Lasers, 2015, 42(4): 0406003.

[9] [9] Wang Di, Yang Yongqiang, Wu Weihui. Process optimization for 316 L stainless steel by fiber laser selective melting[J]. Chinese J Lasers, 2009, 36(12): 3233-3239.

[10] [10] Fu Liding, Shi Yusheng, Zhang Wenxian, et al.. The process research of 316 L stainless steel in selective laser melting[J]. Applied Laser, 2008, 28(2): 108-111.

[11] [11] A Simchi, H Pohl. Direct laser sintering of iron-graphite powder mixture[J]. Materials Science and Engineering A, 2004, 383(2): 191- 200.

[12] [12] B C Zhang, L Dembinski, C Coddet. The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316 L powder[J]. Materials Science and Engineering A, 2013, 584: 21-31.

[13] [13] J P Kruth, L Froyen, J V Vaerenbergh, et al.. Selective laser melting of iron-based powder[J]. Journal of Materials Processing Technology, 2004, 149(1-3): 616-622.

[14] [14] Y C Liu, F Lan, G C Yang, et al.. Microstructural evolution of rapidly solidified Ti-Al peritectic alloy[J]. Journal of Crystal Growth, 2004, 271(1-2): 313-318.

[15] [15] M Schwarz, C B Arnold, M J Aziz, et al.. Dendritic growth velocity and diffusive speed in solidification of undercooled dilute Ni-Zr melts [J]. Materials Science and Engineering A, 1997, 226: 420-424.

[16] [16] B Song, S J Dong, Q Liu, et al.. Vacuum heat treatment of iron parts produced by selective laser melting: Microstructure, residual stress and tensile behavior[J]. Materials and Design, 2014, 54: 727-733.

[17] [17] D D Gu, Y C Hagedorn, W Meiners, et al.. Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium[J]. Acta Materialia, 2012, 60(9): 3849-3860.

[18] [18] H H Zhu, L Lu, J Y H Fuh. Influence of binder′s liquid volume fraction on direct laser sintering of metallic powder[J]. Materials Science and Engineering A, 2004, 371(1-2): 170-177.

[19] [19] D D Gu, Y F Shen. Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS[J]. Journal of Alloys and Compounds, 2009, 473(1-2): 107-115.

[20] [20] C Weingarten, D Buchbinder, N Pirch, et al.. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg [J]. Journal of Materials Processing Technology, 2015, 221: 112-120.

[21] [21] A Simchi, H Pohl. Effects of laser sintering processing parameters on the microstructure and densification of iron powder[J]. Materials Science and Engineering A, 2003, 359(1-2): 119-128.