[1] Zhu S H, Fang D, Niu J H et al. Numerical analysis and experimental study of the terminal-peak sawtooth pulses produced by drop-test shock machine[J]. Spacecraft Environment Engineering, 39, 40-46(2022).

[2] Zhu B L, Wang C Z, Yin H J et al. Simulation analysis of tire vibration based on ABAQUS[J]. China Elastomerics, 32, 12-17(2022).

[3] Gao T Y, Wu H L, Han X. Method for reducing pressure angle of cam curve in zoom system[J]. Acta Photonica Sinica, 48, 0222001(2019).

[4] Wang T, Yuan Y J, Wu Y C et al. Pressure angle optimization for cam curve of continuous zoom lens[J]. Electronics Optics & Control, 28, 61-65(2021).

[5] Zhao F L, Du Y, Zhou H. Analysis of advantages and disadvantages of tilting test method[J]. Automation & Instrumentation, 167-168(2012).

[6] Liang Z H. Generation principle and application of simple post-shock sawtooth waveform[J]. Aero Weaponry, 4, 26-28(1997).

[7] Solfiti E, Viespoli L M, Lervåg M A et al. Experimental characterization of cyclic behaviour of pure lead: temperature sensitivity and strain-rate effects[J]. Materials Science and Engineering: A, 874, 145082(2023).

[8] Yao Y, Li Y, Huang G et al. Research on high speed cold roll-beating based on ABAQUS mesh quality[J]. Journal of Xi’an University of Technology, 34, 14-19(2018).

[9] Du R M, Yao J, Fei W S. Lanczos vector superposition method[J]. Earthquake Engineering and Engineering Vibration, 11, 37-50(1991).

[10] Wang L, Jiang D M. Influence of aging on mechanical properties and damping behavior of an Al-Mg-Si Alloy6063[J]. Light Alloy Fabrication Technology, 31, 35-37(2003).

[11] Jin L M, Zhang Y, Wang C P et al. Cam curve optimization and kinematics simulation of infrared continuous zoom lens[J]. Infrared Technology, 41, 147-152(2019).