[3] [3] DING L, HU S S, QUAN X M, et al. Effect of VN alloy addition on the microstructure and wear resistance of Co-based alloy coatings[J]. Journal of Alloys and Compounds, 2016, 659: 8-14.

[4] [4] PAYDAS H, MERTENS A, CARRUS R, et al. Laser cladding as repair technology for Ti-6Al-4V alloy: Influence of building strategy on microstructure and hardness[J]. Materials & Design, 2015, 85: 497-510.

[8] [8] ASTA M, BECKERMANN C, KARMA A, et al. Solidification microstructures and solid-state parallels: Recent developments, future directions[J]. Acta Materialia, 2009, 57(4): 941-971.

[9] [9] WANG L, WEI Y, YU F. Simulation of primary dendrite arm spacing in an Al-Cu welding molten pool[J]. Materials Science and Technology, 2017, 33(7): 846-853.

[10] [10] FALLAH V, AMOOREZAEI M, PROVATAS N, et al. Phase-field simulation of solidification morphology in laser powder deposition of Ti-Nb alloys[J]. Acta Materialia, 2012, 60(4): 1633-1646.

[11] [11] XIAO W J, LI S M, WANG C S, et al. Multi-scale simulation of dendrite growth for direct energy deposition of nickel-based superalloys[J]. Materials & Design, 2019, 164: 107553.

[12] [12] GENG R W, DU J, WEI Z Y, et al. An adaptive-domain-growth method for phase field simulation of dendrite growth in arc preheated fused-coating additive manufacturing[J]. Journal of Physics: Conference Series, 2018, 1063: 012077.

[13] [13] WU L M, ZHANG J. Phase field simulation of dendritic solidification of Ti-6Al-4V during additive manufacturing process[J]. JOM, 2018, 70(10): 2392-2399.

[18] [18] WANG L, WEI Y H, ZHAN X H, et al. Simulation of dendrite growth in the laser welding pool of aluminum alloy 2024 under transient conditions[J]. Journal of Materials Processing Technology, 2017, 246: 22-29.

[20] [20] HUSSEIN A, HAO L, YAN C Z, et al. Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting[J]. Materials & Design (1980-2015), 2013, 52: 638-647.

[22] [22] LI S M, XIAO H, LIU K Y, et al. Melt-pool motion, temperature variation and dendritic morphology of Inconel 718 during pulsed-and continuous-wave laser additive manufacturing: A comparative study[J]. Materials & Design, 2017, 119: 351-360.

[23] [23] NIE P L, OJO O A, LI Z G. Numerical modeling of microstructure evolution during laser additive manufacturing of a nickel-based superalloy[J]. Acta Materialia, 2014, 77: 85-95.

[24] [24] MILLS K C. Recommended values of thermophysical properties for selected commercial alloys［M］. Cambridge: Woodhead Publishing Limited, 2002.

[26] [26] WANG L, WEI Y H, CHEN J C, et al. Macro-micro modeling and simulation on columnar grains growth in the laser welding pool of aluminum alloy[J]. International Journal of Heat and Mass Transfer, 2018, 123: 826-838.

[27] [27] CHEN Y, BOGNO A A, XIAO N M, et al. Quantitatively comparing phase-field modeling with direct real time observation by synchrotron X-ray radiography of the initial transient during directional solidification of an Al-Cu alloy[J]. Acta Materialia, 2012, 60(1): 199-207.