Researching | Emerging low-cost, large-scale photonic platforms with soft lithography and self-assembly

Photonics Insights, Volume. 2, Issue 2, R04(2023)

Emerging low-cost, large-scale photonic platforms with soft lithography and self-assembly

Hyunjung Kang^1、†, Dohyeon Lee¹, Younghwan Yang¹, Dong Kyo Oh¹, Junhwa Seong¹, Jaekyung Kim¹, Nara Jeon¹, Dohyun Kang¹, and Junsuk Rho^1,2,3、*

Author Affiliations

¹Department of Mechanical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

²Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, Republic of Korea

³POSCO-POSTECH-RIST Convergence Research Center for Flat Optics and Metaphotonics, Pohang, Republic of Korea

show less

Full Text Get PDF

Figures&Tables (14)

References (287)

Paper Information

References(287)

[1] H. M. A. Hamid, Z. Çelik-Butler. Characterization and performance analysis of Li-doped ZnO nanowire as a nano-sensor and nano-energy harvesting element. Nano Energy, 50, 159(2018).

[2] Q. Shi, T. He, C. Lee. More than energy harvesting–combining triboelectric nanogenerator and flexible electronics technology for enabling novel micro-/nano-systems. Nano Energy, 57, 851(2019).

[3] Q. Hu et al. Achieve ultrahigh energy storage performance in BaTiO₃–Bi(Mg_1/2Ti_1/2)O₃ relaxor ferroelectric ceramics via nano-scale polarization mismatch and reconstruction. Nano Energy, 67, 104264(2020).

[4] H. Zhou et al. Chen optical nano-biosensing interface via nucleic acid amplification strategy: construction and application. Chem. Soc. Rev., 47, 1996(2018).

[5] M. Yin et al. Recent development of fiber-optic chemical sensors and biosensors: mechanisms, materials, micro/nano-fabrications and applications. Coord. Chem. Rev., 376, 348(2018).

[6] S. H. Raad, Z. Atlasbaf. Solar cell design using graphene-based hollow nano-pillars. Sci. Rep., 11, 16169(2021).

[7] M. A. Adedeji, M. S. G. Hamed, G. T. Mola. Light trapping using copper decorated nano-composite in the hole transport layer of organic solar cell. Sol. Energy, 203, 83(2020).

[8] J. W. Kim. 3-dimensional nano structures for semiconductor light source. J. Converg. Inf. Technol., 10, 96(2020).

[9] S. Datta et al. Back-end-of-line compatible transistors for monolithic 3-D integration. IEEE Micro, 39, 8(2019).

[10] S. Datta. Ten nanometre CMOS logic technology. Nat. Electron., 1, 500(2018).

[11] Z. Liu et al. Spatially oriented plasmonic ‘nanograter’ structures. Sci. Rep., 6, 28764(2016).

[12] X. Xuan, H. S. Yoon, J. Y. Park. A wearable electrochemical glucose sensor based on simple and low-cost fabrication supported micro-patterned reduced graphene oxide nanocomposite electrode on flexible substrate. Biosens. Bioelectron., 109, 75(2018).

[13] V. Garg, R. G. Mote, J. Fu. Focused ion beam direct fabrication of subwavelength nanostructures on silicon for multicolor generation. Adv. Mater. Technol., 3, 1800100(2018).

[14] G. Seniutinas et al. Tipping solutions: emerging 3D nano-fabrication/-imaging technologies. Nanophotonics, 6, 923(2017).

[15] D. Dieleman et al. Universal direct patterning of colloidal quantum dots by (extreme) ultraviolet and electron beam lithography. Nanoscale, 12, 11306(2020).

[16] X. Zhu et al. Resonant laser printing of structural colors on high-index dielectric metasurfaces. Sci. Adv., 3, e1602487(2017).

[17] B. Cord et al. Limiting factors in sub-10 nm scanning-electron-beam lithography. J. Vac. Sci. Technol. B, 27, 2616(2009).

[18] H. I. Smith et al. Zone-plate-array lithography: a low-cost complement or competitor to scanning-electron-beam lithography. Microelectron. Eng., 83, 956(2006).

[19] J. M. Park et al. Fabrication of tapered micropillars with high aspect-ratio based on deep X-ray lithography. Materials, 12, 2056(2019).

[20] K. Park et al. Fabrication of polymer microstructures of various angles via synchrotron X-ray lithography using simple dimensional transformation. Materials, 11, 1460(2018).

[21] Y. Wada, K. Uehara. Optical limitation in fine pattern photolithography. Jpn. J. Appl. Phys., 13, 2014(1974).

[22] E. Seo, B. K. Choi, O. Kim. Determination of proximity effect parameters and the shape bias parameter in electron beam lithography. Microelectron. Eng., 53, 305(2000).

[23] Z. Lu et al. Application of micro/nanofabrication techniques to on-chip molecular electronics. Small Methods, 5, 2001034(2021).

[24] M. Kim, D. K. Brown, O. Brand. Nanofabrication for all-soft and high-density electronic devices based on liquid metal. Nat. Commun., 11, 1002(2020).

[25] J. del Barrio, C. Sánchez-Somolinos. Light to shape the future: from photolithography to 4D printing. Adv. Opt. Mater., 7, 1900598(2019).

[26] S. Zhu et al. Recent advances in patterning natural polymers: from nanofabrication techniques to applications. Small Methods, 5, 2001060(2021).

[27] W. He, X. Ye, T. Cui. Progress of shrink polymer micro- and nanomanufacturing. Microsyst. Nanoeng., 7, 88(2021).

[28] L. Hui, R. Bai, H. Liu. DNA-based nanofabrication for nanoelectronics. Adv. Funct. Mater., 32, 2112331(2022).

[29] E. Albisetti et al. Nanopatterning reconfigurable magnetic landscapes via thermally assisted scanning probe lithography. Nat. Nanotechnol., 11, 545(2016).

[30] E. Albisetti et al. Thermochemical scanning probe lithography of protein gradients at the nanoscale. Nanotechnology, 27, 315302(2016).

[31] J. A. Rogers, R. G. Nuzzo. Recent progress in soft lithography. Mater. Today, 8, 50(2005).

[32] M. A. Naveed et al. Single-step fabricable flexible metadisplays for sensitive chemical/biomedical packaging security and beyond. ACS Appl. Mater. Interfaces, 14, 31194(2022).

[33] D. K. Oh et al. Nanoimprint lithography for high-throughput fabrication of metasurfaces. Front. Optoelectron., 14, 229(2021).

[34] J. Kim et al. One-step printable platform for high-efficiency metasurfaces down to the deep-ultraviolet region. Light Sci. Appl., 12, 68(2023).

[35] B. Ko et al. Humidity-responsive RGB-pixels via swelling of 3D nanoimprinted polyvinyl alcohol. Adv. Sci., 10, 2204469(2023).

[36] B. Ko et al. Tunable metasurfaces via the humidity responsive swelling of single-step imprinted polyvinyl alcohol nanostructures. Nat. Commun., 13, 6256(2022).

[37] M. Kim et al. Facile fabrication of stretchable photonic Ag nanostructures by soft-contact patterning of ionic Ag solution coatings. Nanophotonics, 11, 2693(2022).

[38] J. Kim et al. Scalable manufacturing of high-index atomic layer–polymer hybrid metasurfaces for metaphotonics in the visible. Nat. Mater., 22, 474(2023).

[39] S. Y. Chou, P. R. Krauss, P. J. Renstrom. Imprint of sub-25 nm vias and trenches in polymers. Appl. Phys. Lett., 67, 3114(1995).

[40] W. Kim et al. Thermally-curable nanocomposite printing for the scalable manufacturing of dielectric metasurfaces. Microsyst. Nanoeng., 8, 73(2022).

[41] M. Modaresialam et al. Nanoimprint lithography processing of inorganic-based materials. Chem. Mater., 33, 5464(2021).

[42] M. H. Asif et al. Comparison of UV-curable materials for high-resolution polymer nanoimprint stamps. Micro Nano Eng., 14, 100118(2022).

[43] H. Hiroshima, M. Komuro. Control of bubble defects in UV nanoimprint. Jpn. J. Appl. Phys., 46, 6391(2007).

[44] H. Hiroshima et al. UV nanoimprint in pentafluoropropane at a minimal imprint pressure. Jpn. J. Appl. Phys., 49, 06GL01(2010).

[45] P. Yi et al. Roll-to-roll UV imprinting lithography for micro/nanostructures. J. Vac. Sci. Technol. B, 33, 060801(2015).

[46] A. Jacobo-Martín et al. Roll-to-roll nanoimprint lithography of high efficiency Fresnel lenses for micro-concentrator photovoltaics. Opt. Express, 29, 34135(2021).

[47] J. Snieder, M. Dielen, R. A. J. van Ostayen. Simulating the residual layer thickness in roll-to-plate nanoimprinting with tensioned webs. Micromachines, 13, 461(2022).

[48] S. H. Ahn, L. J. Guo. High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates. Adv. Mater., 20, 20442049(2008).

[49] V. J. Einck et al. Scalable nanoimprint lithography process for manufacturing visible metasurfaces composed of high aspect ratio TiO₂ meta-atoms. ACS Photonics, 8, 2400(2021).

[50] N. Atthi et al. Fabrication of high aspect ratio micro-structures with superhydrophobic and oleophobic properties by using large-area roll-to-plate nanoimprint lithography. Nanomaterials, 11, 339(2021).

[51] G. Kim et al. Metasurface-driven full-space structured light for three-dimensional imaging. Nat. Commun., 13, 5920(2022).

[52] J.-H. Choi et al. Enhancement of organic solar cell efficiency by patterning the PEDOT:PSS hole transport layer using nanoimprint lithography. Org. Electron., 14, 3180(2013).

[53] F. Jiao et al. Enhanced performance for solar cells with moth-eye structure fabricated by UV nanoimprint lithography. Microelectron. Eng., 103, 126(2013).

[54] X. Hu et al. III-nitride ultraviolet, blue and green LEDs with SiO₂ photonic crystals fabricated by UV-nanoimprint lithography. Mater. Sci. Semicond. Process., 79, 61(2018).

[55] F. Meng et al. Fabrication and characterization of bilayer metal wire-grid polarizer using nanoimprint lithography on flexible plastic substrate. Microelectron. Eng., 88, 3108(2011).

[56] L. Wang et al. High-throughput fabrication of compact and flexible bilayer nanowire grid polarizers for deep-ultraviolet to infrared range. J. Vac. Sci. Technol. B, 32, 031206(2014).

[57] M. Kim et al. Observation of enhanced optical spin Hall effect in a vertical hyperbolic metamaterial. ACS Photonics, 6, 2530(2019).

[58] A. Jacobo-Martín et al. Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint. Sci. Rep., 11, 2419(2021).

[59] W. Kang et al. Large-area flexible infrared nanowire grid polarizer fabricated using nanoimprint lithography. Appl. Opt., 57, 5230(2018).

[60] Y. Gu et al. The fabrication of anti-reflection grating structures film for solar cells using vibration-assisted UV nanoimprint lithography. Sol. Energy, 241, 172(2022).

[61] K. Kim et al. Facile nanocasting of dielectric metasurfaces with sub-100 nm resolution. ACS Appl. Mater. Interfaces, 11, 26109(2019).

[62] J. G. Ok et al. Continuous and scalable fabrication of flexible metamaterial films via roll-to-roll nanoimprint process for broadband plasmonic infrared filters. Appl. Phys. Lett., 101, 223102(2012).

[63] P. Campbell, M. A. Green. Light trapping properties of pyramidally textured surfaces. J. Appl. Phys., 62, 243(1987).

[64] B. Wang, T. Gao, W. P. Leu. Broadband light absorption enhancement in ultrathin film crystalline silicon solar cells with high index of refraction nanosphere arrays. Nano Energy, 19, 471(2016).

[65] M. Moreno, D. Daineka, P. Roca i Cabarrocas. Plasma texturing for silicon solar cells: from pyramids to inverted pyramids-like structures. Sol. Energy Mater. Sol. Cells, 94, 733(2010).

[66] A. P. Amalathas, M. M. Alkaisi. Efficient light trapping nanopyramid structures for solar cells patterned using UV nanoimprint lithography. Mater. Sci. Semicond. Process., 57, 54(2017).

[67] Y. Wang et al. High-efficiency broadband achromatic metalens for near-IR biological imaging window. Nat. Commun., 12, 5560(2021).

[68] W. Sun et al. Lead halide perovskite vortex microlasers. Nat. Commun., 11, 4862(2020).

[69] W. Yang et al. Dynamic bifunctional metasurfaces for holography and color display. Adv. Mater., 33, 2101258(2021).

[70] T. Badloe et al. Electrically tunable bifocal metalens with diffraction-limited focusing and imaging at visible wavelengths. Adv. Sci., 8, 2102646(2021).

[71] I. Kim et al. Stimuli-responsive dynamic metaholographic displays with designer liquid crystal modulators. Adv. Mater., 32, 2004664(2020).

[72] S. So et al. Multicolor and 3D holography generated by inverse-designed single-cell metasurfaces. Adv. Mater., 35, 2208520(2022).

[73] Y. Wang et al. The development progress of surface structure diffraction gratings: from manufacturing technology to spectroscopic applications. Appl. Sci., 12, 6503(2022).

[74] F. Greco et al. Micro-wrinkled palladium surface for hydrogen sensing and switched detection of lower flammability limit. Int. J. Hydrog. Energy, 37, 17529(2012).

[75] J. Lee et al. Highly mobile palladium thin films on an elastomeric substrate: nanogap-based hydrogen gas sensors. Angew. Chem. Int. Ed., 50, 5301(2011).

[76] S. H. Lim et al. Flexible palladium-based H₂ sensor with fast response and low leakage detection by nanoimprint lithography. ACS Appl. Mater. Interfaces, 5, 7274(2013).

[77] S. Takaloo, M. Moghimi. Wearable electrochemical flexible biosensors: with the focus on affinity biosensors. Sens. Bio-Sens. Res., 32, 100403(2021).

[78] H. Wang et al. Robust tattoo electrode prepared by paper-assisted water transfer printing for wearable health monitoring. IEEE Sens. J., 22, 3817(2022).

[79] M. C. McAlpine et al. Highly ordered nanowire arrays on plastic substrates for ultrasensitive flexible chemical sensors. Nat. Mater., 6, 379(2007).

[80] J. Kim et al. Simple, fast, and scalable reverse-offset printing of micropatterned copper nanowire electrodes with sub-10 µm resolution. ACS Appl. Mater. Interfaces, 14, 5807(2022).

[81] S. Joo et al. Intaglio contact printing of versatile carbon nanotube composites and its applications for miniaturizing high-performance devices. Small, 18, 2106174(2022).

[82] M. K. Choi et al. Wearable red–green–blue quantum dot light-emitting diode array using high-resolution intaglio transfer printing. Nat. Commun., 6, 7149(2015).

[83] H. Luo et al. Thermal controlled tunable adhesive for deterministic assembly by transfer printing. Adv. Funct. Mater., 31, 2010297(2021).

[84] S. Kim et al. Microstructured elastomeric surfaces with reversible adhesion and examples of their use in deterministic assembly by transfer printing. Proc. Natl. Acad. Sci., 107, 17095(2010).

[85] A. Zumeit et al. Direct roll transfer printed silicon nanoribbon arrays based high-performance flexible electronics. npj Flex. Electron., 5, 18(2021).

[86] P. Mach et al. Monolithically integrated, flexible display of polymer-dispersed liquid crystal driven by rubber-stamped organic thin-film transistors. Appl. Phys. Lett., 78, 3592(2001).

[87] B. Tian et al. Three-dimensional, flexible nanoscale field-effect transistors as localized bioprobes. Science, 329, 830(2010).

[88] C. H. Lee, D. R. Kim, X. Zheng. Fabrication of nanowire electronics on nonconventional substrates by water-assisted transfer printing method. Nano Lett., 11, 3435(2011).

[89] Z. Wang et al. Intrinsically stretchable organic solar cells beyond 10% power conversion efficiency enabled by transfer printing method. Adv. Funct. Mater., 31, 2103534(2021).

[90] A. Mohapatra et al. Bilayer polymer solar cells prepared with transfer printing of active layers from controlled swelling/de-swelling of PDMS. Nano Energy, 63, 103826(2019).

[91] A. Zumeit et al. High-performance p-channel transistors on flexible substrate using direct roll transfer stamping. Jpn. J. Appl. Phys., 61, SC1042(2022).

[92] J. B. Park et al. Transfer printing of vertical-type microscale light-emitting diode array onto flexible substrate using biomimetic stamp. Opt. Express, 27, 6832(2019).

[93] X. Liang, Z. Fu, S. Y. Chou. Graphene transistors fabricated via transfer-printing in device active-areas on large wafer. Nano Lett., 7, 3840(2007).

[94] H.-S. Kim et al. Self-assembled nanodielectrics and silicon nanomembranes for low voltage, flexible transistors, and logic gates on plastic substrates. Appl. Phys. Lett., 95, 183504(2009).

[95] J. Rho et al. PbZr_xTi_1-xO₃ ferroelectric thin-film capacitors for flexible nonvolatile memory applications. IEEE Electron Device Lett., 31, 1017(2010).

[96] M. Koo et al. Bendable inorganic thin-film battery for fully flexible electronic systems. Nano Lett., 12, 4810(2012).

[97] R.-H. Kim et al. Stretchable, transparent graphene interconnects for arrays of microscale inorganic light emitting diodes on rubber substrates. Nano Lett., 11, 3881(2011).

[98] Y. Qi et al. Piezoelectric ribbons printed onto rubber for flexible energy conversion. Nano Lett., 10, 524(2010).

[99] R. C. Webb et al. Ultrathin conformal devices for precise and continuous thermal characterization of human skin. Nat. Mater., 12, 938(2013).

[100] J. Nam et al. Transfer printed flexible and stretchable thin film solar cells using a water-soluble sacrificial layer. Adv. Energy Mater., 6, 1601269(2016).

[101] Y. Chen et al. Reliable patterning, transfer printing and post-assembly of multiscale adhesion-free metallic structures for nanogap device applications. Adv. Funct. Mater., 30, 2002549(2020).

[102] H. Zhang et al. Graphene as a transparent conductive electrode in GaN-based LEDs. Materials, 15, 2203(2022).

[103] S. Dewan et al. Room temperature electroluminescence from Laser MBE grown gallium nitride LEDs. Mater. Sci. Eng. B, 260, 114655(2020).

[104] Q. Guo et al. Enhanced heat dissipation in gallium nitride-based light-emitting diodes by piezo-phototronic effect. Nano Lett., 21, 4062(2021).

[105] H. Kim et al. Unusual strategies for using indium gallium nitride grown on silicon (111) for solid-state lighting. Proc. Natl. Acad. Sci., 108, 10072(2011).

[106] Y. Yang et al. Revisiting optical material platforms for efficient linear and nonlinear dielectric metasurfaces in the ultraviolet, visible, and infrared. ACS Photonics, 10, 307(2023).

[107] A. Arbabi et al. Planar metasurface retroreflector. Nat. Photonics, 11, 415(2017).

[108] J. Kim et al. Metasurface holography reaching the highest efficiency limit in the visible via one-step nanoparticle-embedded-resin printing. Laser Photonics Rev., 16, 2200098(2022).

[109] H. Liu et al. Transfer printing of solution-processed 3D ZnO nanostructures with ultra-high yield for flexible metasurface color filter. Adv. Mater. Interfaces, 9, 2101963(2022).

[110] J. G. Son et al. Sub-10 nm graphene nanoribbon array field-effect transistors fabricated by block copolymer lithography. Adv. Mater., 25, 4723(2013).

[111] D. Ho et al. Capillary force lithography: the versatility of this facile approach in developing nanoscale applications. Nanoscale, 7, 401(2015).

[112] C. D. Bandara et al. Bactericidal effects of natural nanotopography of dragonfly wing on Escherichia coli. ACS Appl. Mater. Interfaces, 9, 6746(2017).

[113] H. Zhou et al. Bio-inspired photonic materials: prototypes and structural effect designs for applications in solar energy manipulation. Adv. Funct. Mater., 28, 1705309(2018).

[114] Q. Li, M. G. Ji, J. Kim. Grayscale nanopixel printing at sub-10-nanometer vertical resolution via light-controlled nanocapillarity. ACS Nano, 14, 6058(2020).

[115] A. R. Parker, H. E. Townley. Biomimetics of photonic nanostructures. Nat. Nanotechnol., 2, 347(2007).

[116] J. Henzie, M. H. Lee, T. W. Odom. Multiscale patterning of plasmonic metamaterials. Nat. Nanotechnol., 2, 549(2007).

[117] C. Ye et al. Hierarchical structure: silicon nanowires standing on silica microwires. Adv. Mater., 16, 1019(2004).

[118] Y.-T. Tseng et al. Fabrication of double-length-scale patterns via lithography, block copolymer templating, and electrodeposition. Adv. Mater., 19, 3584(2007).

[119] Y. Xia, G. M. Whitesides. Soft lithography. Angew. Chem. Int. Ed., 37, 550(1998).

[120] K. Y. Suh, H. H. Lee. Capillary force lithography: large-area patterning, self-organization, and anisotropic dewetting. Adv. Funct. Mater., 12, 405(2002).

[121] H. E. Jeong et al. Generation and self-replication of monolithic, dual-scale polymer structures by two-step capillary-force lithography. Small, 4, 1913(2008).

[122] R. Kwak, H. E. Jeong, K. Y. Suh. Fabrication of monolithic bridge structures by vacuum-assisted capillary-force lithography. Small, 5, 790(2009).

[123] S. H. Lee et al. Continuous tip widening technique for roll-to-roll fabrication of dry adhesives. Coatings, 8, 349(2018).

[124] X. Yu et al. Solvent assisted capillary force lithography. Polymer, 46, 11099(2005).

[125] D. Zhang et al. Fabrication of diffractive optical elements on 3-D curved surfaces by capillary force lithography. Opt. Express, 18, 15009(2010).

[126] M. K. Kwak, Y.-W. Lim. Multi-functional nanopatterned optical films fabricated using capillary force lithography. J. Colloid Interface Sci., 367, 460(2012).

[127] K. A. Moga et al. Rapidly-dissolvable microneedle patches via a highly scalable and reproducible soft lithography approach. Adv. Mater., 25, 5060(2013).

[128] J. M. R. Tan et al. A large-scale superhydrophobic surface-enhanced Raman scattering (SERS) platform fabricated via capillary force lithography and assembly of Ag nanocubes for ultratrace molecular sensing. Phys. Chem. Chem. Phys., 16, 26983(2014).

[129] D. H. Kim, H. J. An, J.-M. Myoung. Red-emitting micro PeLEDs for UHD displays by using capillary force lithography. Chem. Eng. J., 448, 137727(2022).

[130] Y.-H. Kim, H. Cho, T.-W. Lee. Metal halide perovskite light emitters. Proc. Natl. Acad. Sci., 113, 11694(2016).

[131] S.-R. Kim, J.-H. Kim, J.-W. Park. Wearable and transparent capacitive strain sensor with high sensitivity based on patterned Ag nanowire networks. ACS Appl. Mater. Interfaces, 9, 26407(2017).

[132] B. Du et al. Highly sensitive hydrogen sensor based on an in-fiber Mach-Zehnder interferometer with polymer infiltration and Pt-loaded WO₃ coating. Opt. Express, 29, 4147(2021).

[133] J. Tian et al. A ppb-level hydrogen sensor based on activated Pd nanoparticles loaded on oxidized nickel foam. Sens. Actuators B Chem., 329, 129194(2021).

[134] H.-S. Lee et al. Hydrogen gas sensors using palladium nanogaps on an elastomeric substrate. Adv. Mater., 33, 2005929(2021).

[135] L. Bannenberg, H. Schreuders, B. Dam. Tantalum-palladium: hysteresis-free optical hydrogen sensor over 7 orders of magnitude in pressure with sub-second response. Adv. Funct. Mater., 31, 2010483(2021).

[136] P. Offermans et al. Ultralow-power hydrogen sensing with single palladium nanowires. Appl. Phys. Lett., 94, 223110(2009).

[137] J. Zou et al. Regiospecific linear assembly of Pd nanocubes for hydrogen gas sensing. Chem. Commun., 48, 1033(2012).

[138] H. C. Bauser et al. Photonic crystal waveguides for >90% light trapping efficiency in luminescent solar concentrators. ACS Photonics, 7, 2122(2020).

[139] G. M. Katyba et al. Sapphire photonic crystal waveguides for terahertz sensing in aggressive environments. Adv. Opt. Mater., 6, 1800573(2018).

[140] F. Wu et al. Ultra-large omnidirectional photonic band gaps in one-dimensional ternary photonic crystals composed of plasma, dielectric and hyperbolic metamaterial. Opt. Mater., 111, 110680(2021).

[141] W.-G. Kim et al. Three-dimensional plasmonic nanocluster-driven light–matter interaction for photoluminescence enhancement and picomolar-level biosensing. Nano Lett., 22, 4702(2022).

[142] Y. Qi et al. Rotational periodicity display of the tunable wettability pattern in a photoswitch based on a response bilayer photonic crystal. ACS Appl. Mater. Interfaces, 12, 9664(2020).

[143] J. Lou et al. Surface plasmon resonance photonic crystal fiber biosensor based on gold-graphene layers. Opt. Fiber Technol., 50, 206(2019).

[144] D. Kou et al. High-sensitive and stable photonic crystal sensors for visual detection and discrimination of volatile aromatic hydrocarbon vapors. Chem. Eng. J., 375, 121987(2019).

[145] H. Aly et al. Biophotonic sensor for the detection of creatinine concentration in blood serum based on 1D photonic crystal. RSC Adv., 10, 31765(2020).

[146] K. Landfester. Synthesis of colloidal particles in miniemulsions. Annu. Rev. Mater. Res., 36, 231(2006).

[147] Y.-C. Lu, K.-S. Chou. A simple and effective route for the synthesis of nano-silver colloidal dispersions. J. Chin. Inst. Chem. Eng., 39, 673(2008).

[148] B.-I. Lee et al. Synthesis of colloidal aqueous suspensions of a layered gadolinium hydroxide: a potential MRI contrast agent. Dalton Trans., 2009, 2490(2009).

[149] P. P. Ghimire, M. Jaroniec. Renaissance of Stöber method for synthesis of colloidal particles: new developments and opportunities. J. Colloid Interface Sci., 584, 838(2021).

[150] S.-H. Wu, C.-Y. Mou, H.-P. Lin. Synthesis of mesoporous silica nanoparticles. Chem. Soc. Rev., 42, 3862(2013).

[151] A. S. Tse, Z. Wu, S. A. Asher. Synthesis of dyed monodisperse poly(methyl methacrylate) colloids for the preparation of submicron periodic light-absorbing arrays. Macromolecules, 28, 6533(1995).

[152] M. J. Percy, S. P. Armes. Surfactant-free synthesis of colloidal poly(methyl methacrylate)/silica nanocomposites in the absence of auxiliary comonomers. Langmuir, 18, 4562(2002).

[153] C. E. Reese et al. Synthesis of highly charged, monodisperse polystyrene colloidal particles for the fabrication of photonic crystals. J. Colloid Interface Sci., 232, 76(2000).

[154] L. A. Dykman, N. G. Khlebtsov. Methods for chemical synthesis of colloidal gold. Russ. Chem. Rev., 88, 229(2019).

[155] K. P. Velikov, G. E. Zegers, A. van Blaaderen. Synthesis and characterization of large colloidal silver particles. Langmuir, 19, 1384(2003).

[156] W. Zhang, X. Qiao, J. Chen. Synthesis of nanosilver colloidal particles in water/oil microemulsion. Colloids Surf. Physicochem. Eng. Asp., 299, 22(2007).

[157] R. A. Sperling, W. J. Parak. Surface modification, functionalization and bioconjugation of colloidal inorganic nanoparticles. Philos. Trans. Royal Soc. A, 368, 1333(2010).

[158] V. N. Manoharan, M. T. Elsesser, D. J. Pine. Dense packing and symmetry in small clusters of microspheres. Science, 301, 483(2003).

[159] A. Winkleman et al. Directed self-assembly of spherical particles on patterned electrodes by an applied electric field. Adv. Mater., 17, 1507(2005).

[160] K. H. Li, H. W. Choi. InGaN light-emitting diodes with indium-tin-oxide photonic crystal current-spreading layer. J. Appl. Phys., 110, 053104(2011).

[161] A. Mihi et al. Oriented colloidal-crystal thin films by spin-coating microspheres dispersed in volatile media. Adv. Mater., 18, 2244(2006).

[162] D. B. Mitzi et al. High-mobility ultrathin semiconducting films prepared by spin coating. Nature, 428, 299(2004).

[163] F. Zhang et al. Ultrathin film organic transistors: precise control of semiconductor thickness via spin-coating. Adv. Mater., 25, 1401(2013).

[164] H. Wang et al. Generation of spin-dependent accelerating beam with geometric metasurface. Adv. Opt. Mater., 7, 1900552(2019).

[165] P. Jiang, M. J. McFarland. Large-scale fabrication of wafer-size colloidal crystals, macroporous polymers and nanocomposites by spin-coating. J. Am. Chem. Soc., 126, 13778(2004).

[166] J. Chen et al. Controllable fabrication of 2D colloidal-crystal films with polystyrene nanospheres of various diameters by spin-coating. Appl. Surf. Sci., 270, 6(2013).

[167] M. H. Kim et al. Rapid fabrication of two- and three-dimensional colloidal crystal films via confined convective assembly. Adv. Funct. Mater., 15, 1329(2005).

[168] N. Vogel et al. Wafer-scale fabrication of ordered binary colloidal monolayers with adjustable stoichiometries. Adv. Funct. Mater., 21, 3064(2011).

[169] T. Kohoutek et al. Controlled self-assembly of Langmuir-Blodgett colloidal crystal films of monodispersed silica particles on non-planar substrates. Colloids Surf. Physicochem. Eng. Asp., 593, 124625(2020).

[170] M. Maillard et al. Rings and hexagons made of nanocrystals: a Marangoni effect. J. Phy. Chem. B, 104, 11871(2000).

[171] J. A. Fan et al. Plasmonic mode engineering with templated self-assembled nanoclusters. Nano Lett., 12, 5318(2012).

[172] C. Hanske et al. Strongly coupled plasmonic modes on macroscopic areas via template-assisted colloidal self-assembly. Nano Lett., 14, 6863(2014).

[173] M. R. Kim et al. Transferable crack-free colloidal crystals on an elastomeric matrix with surface relief. Adv. Funct. Mater., 23, 5700(2013).

[174] E. V. Yakovlev et al. Tunable two-dimensional assembly of colloidal particles in rotating electric fields. Sci. Rep., 7, 13727(2017).

[175] J. Sun et al. Fabrication of centimeter-sized single-domain two-dimensional colloidal crystals in a wedge-shaped cell under capillary forces. Langmuir, 26, 7859(2010).

[176] P. Gao et al. Large-area nanosphere self-assembly by a micro-propulsive injection method for high throughput periodic surface nanotexturing. Nano Lett., 15, 4591(2015).

[177] N. Arai, S. Watanabe, M. T. Miyahara. On the convective self-assembly of colloidal particles in nanofluid based on in situ measurements of interaction forces. Langmuir, 35, 11533(2019).

[178] A. Holm et al. Langmuir–Blodgett deposition of graphene oxide—identifying Marangoni flow as a process that fundamentally limits deposition control. Langmuir, 34, 9683(2018).

[179] Y. Cai, B. Zhang. Newby Marangoni flow-induced self-assembly of hexagonal and stripelike nanoparticle patterns. J. Am. Chem. Soc., 130, 6076(2008).

[180] W. Cheon et al. Enhancing the plasmonic component of photonic–plasmonic resonances in self-assembled dielectric spheres on Ag. J. Mater. Chem., 9, 1764(2021).

[181] Y. Yin, Y. Xia. Self-assembly of monodispersed spherical colloids into complex aggregates with well-defined sizes, shapes, and structures. Adv. Mater., 13, 267(2001).

[182] V. Gupta et al. Mechanotunable surface lattice resonances in the visible optical range by soft lithography templates and directed self-assembly. ACS Appl. Mater. Interfaces, 11, 28189(2019).

[183] M. Wang, L. He, Y. Yin. Magnetic field guided colloidal assembly. Mater. Today, 16, 110(2013).

[184] A. F. Demirörs et al. Colloidal assembly directed by virtual magnetic moulds. Nature, 503, 99(2013).

[185] L. He et al. Magnetic assembly and patterning of general nanoscale materials through nonmagnetic templates. Nano Lett., 13, 264(2013).

[186] J. R. Oh et al. Fabrication of wafer-scale polystyrene photonic crystal multilayers via the layer-by-layer scooping transfer technique. J. Mater. Chem., 21, 14167(2011).

[187] L. Zhang et al. Layer-by-layer approach to (2+1)D photonic crystal superlattice with enhanced crystalline integrity. Small, 11, 4910(2015).

[188] Y. Wang et al. Colloids with valence and specific directional bonding. Nature, 491, 51(2012).

[189] Y. Zhao et al. Metallo-dielectric photonic crystals for surface-enhanced Raman scattering. ACS Nano, 5, 3027(2011).

[190] C. Song et al. Large-area nanosphere self-assembly monolayers for periodic surface nanostructures with ultrasensitive and spatially uniform SERS sensing. Small, 18, 2104202(2022).

[191] N. Suzuki et al. Microfluidically patterned dome-shaped photonic colloidal crystals exhibiting structural colors with low angle dependency. Adv. Opt. Mater., 5, 1600900(2017).

[192] S.-M. Yang et al. Nanomachining by colloidal lithography. Small, 2, 458(2006).

[193] H. Fredriksson et al. Hole–mask colloidal lithography. Adv. Mater., 19, 4297(2007).

[194] K. Zhong et al. Instantaneous, simple, and reversible revealing of invisible patterns encrypted in robust hollow sphere colloidal photonic crystals. Adv. Mater., 30, 1707246(2018).

[195] J. Shen et al. Self-assembled chiral phosphorescent microflowers from Au nanoclusters with dual-mode pH sensing and information encryption. ACS Nano, 15, 4947(2021).

[196] M. Schöttle et al. Time–temperature integrating optical sensors based on gradient colloidal crystals. Adv. Mater., 33, 2101948(2021).

[197] R. Kim et al. Metal nanoparticle array as a tunable refractive index material over broad visible and infrared wavelengths. ACS Photonics, 5, 1189(2018).

[198] X. Xu et al. Multiple-patterning nanosphere lithography for fabricating periodic three-dimensional hierarchical nanostructures. ACS Nano, 11, 10384(2017).

[199] A. Sarycheva, Y. Gogotsi. Raman spectroscopy analysis of the structure and surface chemistry of Ti₃C₂T_x MXene. Chem. Mater., 32, 3480(2020).

[200] F. Li et al. Study of hydrogen bonding in ethanol-water binary solutions by Raman spectroscopy. Spectrochim. Acta. A, 189, 621(2018).

[201] S. Kasani, K. Curtin, N. Wu. A review of 2D and 3D plasmonic nanostructure array patterns: fabrication, light management and sensing applications. Nanophotonics, 8, 2065(2019).

[202] D. G. Kotsifaki, S. N. Chormaic. Plasmonic optical tweezers based on nanostructures: fundamentals, advances and prospects. Nanophotonics, 8, 1227(2019).

[203] Y. Li et al. Highly reproducible SERS sensor based on self-assembled Au nanocubic monolayer film for sensitive and quantitative detection of glutathione. Appl. Surf. Sci., 540, 148381(2021).

[204] T. K. Naqvi et al. Silver nanoparticles decorated reduced graphene oxide (rGO) SERS sensor for multiple analytes. Appl. Surf. Sci., 478, 887(2019).

[205] G. Barbillon, A. Ivanov, A. K. Sarychev. Hybrid Au/Si disk-shaped nanoresonators on gold film for amplified SERS chemical sensing. Nanomaterials, 9, 1588(2019).

[206] D. Joseph et al. Synthesis of AuAg@Ag core@shell hollow cubic nanostructures as SERS substrates for attomolar chemical sensing. Sens. Actuators B Chem., 281, 471(2019).

[207] Z. Liu et al. A two-dimensional fingerprint nanoprobe based on black phosphorus for bio-SERS analysis and chemo-photothermal therapy. Nanoscale, 10, 18795(2018).

[208] X. Zhao et al. Hydrophobic multiscale cavities for high-performance and self-cleaning surface-enhanced Raman spectroscopy (SERS) sensing. Nanophotonics, 9, 4761(2020).

[209] X. Song et al. Selective preparation of Mo₂N and MoN with high surface area for flexible SERS sensing. Nano Lett., 21, 4410(2021).

[210] E. Shkondin et al. High aspect ratio plasmonic nanotrench structures with large active surface area for label-free mid-infrared molecular absorption sensing. ACS Appl. Nano Mater., 1, 1212(2018).

[211] M. Vlk et al. Extraordinary evanescent field confinement waveguide sensor for mid-infrared trace gas spectroscopy. Light Sci. Appl., 10, 26(2021).

[212] D. Lin et al. Large-area Au-nanoparticle-functionalized Si nanorod arrays for spatially uniform surface-enhanced Raman spectroscopy. ACS Nano, 11, 1478(2017).

[213] Y. Guan et al. In situ chemical patterning technique. Adv. Funct. Mater., 32, 2107945(2022).

[214] X. Zhang et al. Ultrasensitive SERS performance in 3D “sunflower-like” nanoarrays decorated with Ag nanoparticles. Nanoscale, 9, 3114(2017).

[215] Y. Yang et al. Revealing structural disorder in hydrogenated amorphous silicon for a low-loss photonic platform at visible frequencies. Adv. Mater., 33, 2005893(2021).

[216] S. Shrestha et al. Broadband achromatic dielectric metalenses. Light Sci. Appl., 7, 85(2018).

[217] J. Y. Kim et al. Highly tunable refractive index visible-light metasurface from block copolymer self-assembly. Nat. Commun., 7, 12911(2016).

[218] H. Negoro et al. Template-assisted self-assembly of colloidal silicon nanoparticles for all-dielectric nanoantenna. Adv. Opt. Mater., 10, 2102750(2022).

[219] Y. Cho et al. Scalable, highly uniform, and robust colloidal Mie resonators for all-dielectric soft meta-optics. Adv. Opt. Mater., 7, 1801167(2019).

[220] H. Lu et al. Enhanced diffuse reflectance and microstructure properties of hybrid titanium dioxide nanocomposite coating. Nanoscale Res. Lett., 13, 328(2018).

[221] D. Lee et al. Multiple-patterning colloidal lithography-implemented scalable manufacturing of heat-tolerant titanium nitride broadband absorbers in the visible to near-infrared. Microsyst. Nanoeng., 7, 14(2021).

[222] Y. Wang et al. Interactively full-color changeable electronic fiber sensor with high stretchability and rapid response. Adv. Funct. Mater., 30, 2000356(2020).

[223] W. Yuan et al. Structural color fibers directly drawn from colloidal suspensions with controllable optical properties. ACS Appl. Mater. Interfaces, 11, 19388(2019).

[224] C. Kang, A. Honciuc. Self-assembly of Janus nanoparticles into transformable suprastructures. J. Phys. Chem. Lett., 9, 1415(2018).

[225] H. Wang et al. Anisotropic structural color particles from colloidal phase separation. Sci. Adv., 6, eaay1438(2020).

[226] M. Kuang et al. Inkjet printing patterned photonic crystal domes for wide viewing-angle displays by controlling the sliding three phase contact line. Adv. Opt. Mater., 2, 34(2014).

[227] A. M. Mansour. Fabrication and characterization of a photodiode based on 5′,5′′-dibromo-o-cresolsulfophthalein (BCP). Silicon, 11, 1989(2019).

[228] E. W. Cochran, C. J. Garcia-cervera, G. H. Fredrickson. Stability of the gyroid phase in diblock copolymers at strong segregation. Macromolecules, 39, 2449(2006).

[229] A. B. Chang, F. S. Bates. The ABCs of block polymers. Macromolecules, 53, 2765(2020).

[230] M. T. Islam et al. Self-assembly of a liquid crystal ABA triblock copolymer in a B-selective organic solvent. Polymer, 66, 94(2015).

[231] P. W. Majewski. Arbitrary lattice symmetries via block copolymer nanomeshes. Nat. Commun., 6, 7448(2015).

[232] K. G. Tavakkoli et al. Multilayer block copolymer meshes by orthogonal self-assembly. Nat. Commun., 7, 10518(2016).

[233] H. Huang et al. Self-directed self-assembly of 3D tailored block copolymer nanostructures. ACS Nano, 14, 15182(2020).

[234] G. von Freymann et al. Three-dimensional nanostructures for photonics. Adv. Funct. Mater., 20, 1038(2010).

[235] A. P. Lane et al. Directed self-assembly and pattern transfer of five nanometer block copolymer lamellae. ACS Nano, 11, 7656(2017).

[236] J. H. Mun et al. Controlled segmentation of metal nanowire array by block copolymer lithography and reversible ion loading. Small, 13, 1603939(2017).

[237] T. N. Hoheisel, K. Hur, U. B. Wiesner. Block copolymer-nanoparticle hybrid self-assembly. Prog. Polym. Sci., 40, 3(2015).

[238] A. Horechyy et al. A step-wise approach for dual nanoparticle patterning via block copolymer self-assembly. Adv. Funct. Mater., 23, 483(2013).

[239] V. B. Leffler et al. Controlled assembly of block copolymer coated nanoparticles in 2D arrays. Angew. Chem. Int. Ed., 131, 8629(2019).

[240] M. P. Stoykovich et al. Directed assembly of block copolymer blends into nonregular device-oriented structures. Science, 308, 1442(2005).

[241] C. T. Black, O. Bezencenet. Nanometer-scale pattern registration and alignment by directed diblock copolymer self-assembly. IEEE Trans. Nanotechnol., 3, 412(2004).

[242] S.-M. Park et al. Directed assembly of lamellae- forming block copolymers by using chemically and topographically patterned substrates. Adv. Mater., 19, 607(2007).

[243] J. Y. Cheng et al. Fabrication of nanostructures with long-range order using block copolymer lithography. Appl. Phys. Lett., 81, 3657(2002).

[244] J. Y. Cheng et al. Dense self-assembly on sparse chemical patterns: rectifying and multiplying lithographic patterns using block copolymers. Adv. Mater., 20, 3155(2008).

[245] J. Chai, J. M. Buriak. Using cylindrical domains of block copolymers to self-assemble and align metallic nanowires. ACS Nano, 2, 489(2008).

[246] I. Gunkel. Directing block copolymer self-assembly on patterned substrates. Small, 14, 1802872(2018).

[247] H.-J. Jeon et al. Complex high-aspect-ratio metal nanostructures by secondary sputtering combined with block copolymer self-assembly. Adv. Mater., 28, 8439(2016).

[248] H. S. Suh et al. Sub-10-nm patterning via directed self-assembly of block copolymer films with a vapour-phase deposited topcoat. Nat. Nanotechnol., 12, 575(2017).

[249] K. Wu et al. Gold nanoparticles sliding on recyclable nanohoodoos—engineered for surface-enhanced Raman spectroscopy. Adv. Funct. Mater., 28, 1704818(2018).

[250] J. W. Jeong et al. 3D cross-point plasmonic nanoarchitectures containing dense and regular hot spots for surface-enhanced Raman spectroscopy analysis. Adv. Mater., 28, 8695(2016).

[251] I. Murataj et al. Hyperbolic metamaterials via hierarchical block copolymer nanostructures. Adv. Opt. Mater., 9, 2001933(2021).

[252] C. Kilchoer et al. Hyperbolic optical metamaterials from shear-aligned block copolymer cylinder arrays. Adv. Photonics Res., 1, 2000037(2020).

[253] S. Kim et al. Self-assembled pagoda-like nanostructure-induced vertically stacked split-ring resonators for polarization-sensitive dichroic responses. Nano Converg., 9, 40(2022).

[254] L. Yang et al. Intrinsically breathable and flexible NO₂ gas sensors produced by laser direct writing of self-assembled block copolymers. ACS Appl. Mater. Interfaces, 14, 17818(2022).

[255] T. Yun et al. 2D metal chalcogenide nanopatterns by block copolymer lithography. Adv. Funct. Mater., 28, 1804508(2018).

[256] J. Frascaroli et al. Resistive switching in high-density nanodevices fabricated by block copolymer self-assembly. ACS Nano, 9, 2518(2015).

[257] C.-C. Hung et al. Conception of stretchable resistive memory devices based on nanostructure-controlled carbohydrate-block-polyisoprene block copolymers. Adv. Funct. Mater., 27, 1606161(2017).

[258] K. H. Ku et al. Multicolor emission of hybrid block copolymer–quantum dot microspheres by controlled spatial isolation of quantum dots. Small, 9, 2667(2013).

[259] M. Bugakov et al. Hybrid fluorescent liquid crystalline composites: directed assembly of quantum dots in liquid crystalline block copolymer matrices. RSC Adv., 10, 15264(2020).

[260] H. M. Jin et al. Ultralarge area sub-10 nm plasmonic nanogap array by block copolymer self-assembly for reliable high-sensitivity SERS. ACS Appl. Mater. Interfaces, 10, 44660(2018).

[261] H. Lim et al. Synthesis of uniformly sized mesoporous silver films and their SERS application. J. Phys. Chem. C, 124, 23730(2020).

[262] Y.-C. Lu et al. Fabrication of gyroid-structured metal/semiconductor nanoscaffolds with ultrasensitive SERS detection via block copolymer templating. Adv. Opt. Mater., 11, 2202280.

[263] Y. L. Lin et al. Reproducible and bendable SERS substrates with tailored wettability using block copolymers and anodic aluminum oxide templates. Macromol. Rapid Commun., 41, 2000088(2020).

[264] R. H. Siddique et al. Scalable and controlled self-assembly of aluminum-based random plasmonic metasurfaces. Light Sci. Appl., 6, e17015(2017).

[265] C. Cummins et al. An ultra-thin near-perfect absorber via block copolymer engineered metasurfaces. J. Colloid Interface Sci., 609, 375(2022).

[266] W. Banerjee. Challenges and applications of emerging nonvolatile memory devices. Electronics, 9, 1029(2020).

[267] N.-G. Kang et al. Structural and electrical characterization of a block copolymer-based unipolar nonvolatile memory device. Adv. Mater., 24, 385(2012).

[268] T. W. Park, W. I. Park. Switching-modulated phase change memory realized by Si-containing block copolymers. Small, 17, 2105078(2021).

[269] O. Auciello, D. M. Aslam. Review on advances in microcrystalline, nanocrystalline and ultrananocrystalline diamond films-based micro/nano-electromechanical systems technologies. J. Mater. Sci., 56, 7171(2021).

[270] J. Zhu et al. Development trends and perspectives of future sensors and MEMS/NEMS. Micromachines, 11, 7(2020).

[271] Z. Ren et al. Leveraging of MEMS technologies for optical metamaterials applications. Adv. Opt. Mater., 8, 1900653(2020).

[272] Q. Wang et al. Wearable multifunctional piezoelectric MEMS device for motion monitoring, health warning, and earphone. Nano Energy, 89, 106324(2021).

[273] R.-J. Xu, Y.-S. Lin. Actively MEMS-based tunable metamaterials for advanced and emerging applications. Electronics, 11, 243(2022).

[274] H. Zhang et al. Employing a MEMS plasma switch for conditioning high-voltage kinetic energy harvesters. Nat. Commun., 11, 3221(2020).

[275] M. T. Bodduluri et al. Fully integrated high-performance MEMS energy harvester for mechanical and contactless magnetic excitation in resonance and at low frequencies. Micromachines, 13, 863(2022).

[276] M. Miyata et al. Scalable direct printing of visible-light metasurfaces composed of an industrial ZrO₂-composite imprint material. Opt. Mater. Express, 12, 4169(2022).

[277] Y. Li et al. A high-efficient and low-consumption nanoimprint method to prepare large-area and high-quality Nafion array for the ordered MEA of fuel cell. Chem. Eng. J., 451, 138722(2023).

[278] M. A. Badshah et al. Glass nanoimprinted plasmonic nanostructure for high power laser stable surface-enhanced Raman spectroscopy substrate. Appl. Surf. Sci., 542, 148587(2021).

[279] R. Zhao et al. A fast and cost-effective transfer printing of liquid metal inks for three-dimensional wiring in flexible electronics. ACS Appl. Mater. Interfaces, 12, 36723(2020).

[280] C. M. Went et al. A new metal transfer process for van der Waals contacts to vertical Schottky-junction transition metal dichalcogenide photovoltaics. Sci. Adv., 5, eaax6061(2019).

[281] G. Liu et al. Graphene-assisted metal transfer printing for wafer-scale integration of metal electrodes and two-dimensional materials. Nat. Electron., 5, 275(2022).

[282] Z. Li et al. Mass transfer printing of metal-halide perovskite films and nanostructures. Adv. Mater., 34, 2203529(2022).

[283] H. Lee et al. Aligned proton transport highway of hierarchically structured proton-exchange membranes constructed via capillary force lithography. ACS Appl. Energy Mater., 5, 6256(2022).

[284] Y. Park et al. Large-area single-crystal organic patterned thin films by vertically confined lateral crystal growth via capillary force lithography. Appl. Surf. Sci., 494, 1023(2019).

[285] S. Jang et al. Facile fabrication of three-dimensional TiO₂ structures for highly efficient perovskite solar cells. Nano Energy, 22, 499(2016).

[286] M. Mayer et al. Aqueous gold overgrowth of silver nanoparticles: merging the plasmonic properties of silver with the functionality of gold. Angew. Chem. Int. Ed., 56, 15866(2017).

[287] G. E. Akinoglu et al. Block copolymer derived vertically coupled plasmonic arrays for surface-enhanced Raman spectroscopy. ACS Appl. Mater. Interfaces, 12, 23410(2020).

Tools

Get Citation

Copy Citation Text

Hyunjung Kang, Dohyeon Lee, Younghwan Yang, Dong Kyo Oh, Junhwa Seong, Jaekyung Kim, Nara Jeon, Dohyun Kang, Junsuk Rho, "Emerging low-cost, large-scale photonic platforms with soft lithography and self-assembly," Photon. Insights 2, R04 (2023)

Download Citation

EndNote(RIS)BibTex Plain Text

Set citation alerts for article

Save article for my favorites

Paper Information

Category: Review Articles

Received: Nov. 6, 2022

Accepted: Mar. 28, 2023

Published Online: May. 23, 2023

The Author Email: Junsuk Rho (jsrho@postech.ac.kr)

DOI:10.3788/PI.2023.R04

Topics

laser devices and laser physics

Lasers and Laser Optics

laser manufacturing

Instrumentation, Measurement and Metrology