[1] [1] XIONG S, JIA X J, WU S S, et al. Parameter optimization and effect analysis of low-pressure abrasive water jet (LPAWJ) for paint removal of remanufacturing cleaning［J］. Sustainability, 2021, 13(5): 2900.

[2] [2] GIUSTI C, COLOMBINI M P, LLUVERAS-TENORIO A, et al. Graphic vandalism: Multi-analytical evaluation of laser and chemical methods for the removal of spray paints［J］. Journal of Cultural Heritage, 2020, 44: 260-274.

[3] [3] ZHAO H C, QIAO Y L, DU X, et al. Effect and mechanism of energy density on the aluminum alloy paint cleaned by laser［J］. Laser & Optoelectronics Progress, 2020, 57(13): 131403.

[4] [4] MADHUKAR Y K, MULLICK S, NATH A K. Development of a water-jet assisted laser paint removal process［J］. Applied Surface Science, 2013, 286: 192-205.

[5] [5] HAN J H, CUI X D, WANG S, et al. Laser effects based optimal laser parameter identifications for paint removal from metal substrate at 1 064 nm: A multi-pulse model［J］. Journal of Modern Optics, 2017, 64(19): 1947-1959.

[6] [6] MATEO M P, CTVRTNICKOVA T, FERNANDEZ E, et al. Laser cleaning of varnishes and contaminants on brass［J］. Applied Surface Science, 2009, 255(10): 5579-5583.

[7] [7] REN Y, WANG W T, JIN S, et al. Effect of laser cleaning on the surface properties of aluminum alloy tire mold［J］. Applied Laser, 2020, 40(5): 901-906.

[8] [8] DENG D W, CHANG Z D, MA Y B, et al. Influence of process parameters on microstructure and residual stress of 316L laser cladding layer［J］. Applied Laser, 2021, 41(1): 83-88.

[9] [9] LU Y, YANG L J, WANG M L, et al. Improved thermal stress model and its application in ultraviolet nanosecond laser cleaning of paint［J］. Applied Optics, 2020, 59(25): 7652-7659.

[10] [10] SHAN T, YIN F S, WANG S J, et al. Surface integrity control of laser cleaning of an aluminum alloy surface paint layer［J］. Applied Optics, 2020, 59(30): 9313-9319.

[11] [11] KIM J E, HAN M S, KIM J D. Removal characteristics of shop-primer paint by laser energy density in Q-switching fiber laser cleaning［J］. Modern Physics Letters B, 2020, 34(07n09): 2040042.

[12] [12] RODE A V, FREEMAN D, BALDWIN K G H, et al. Scanning the laser beam for ultrafast pulse laser cleaning of paint［J］. Applied Physics A, 2008, 93(1): 135-139.

[13] [13] LI R R, HE C J, CHEN Y J, et al. Research progress on laser surface treatment of wood materials［J］. Journal of Forestry Engineering, 2021, 6(2): 31-39.

[14] [14] LI R R, XU W, XIONG X Q, et al. Effects of laser processing parameters on wood processability［J］. China Wood Industry, 2018, 32(6): 28-31.

[15] [15] POULI P, OUJJA M, CASTILLEJO M. Practical issues in laser cleaning of stone and painted artefacts: Optimisation procedures and side effects［J］. Applied Physics A, 2012, 106(2): 447-464.

[16] [16] WAN Z, YANG X F, XIA G F, et al. Effect of laser power on cleaning mechanism and surface properties［J］. Applied Optics, 2020, 59(30): 9482-9490.

[17] [17] WAN Z, YANG X F, XIA G F, et al. Effect of laser frequency on the mechanism and performance of laser dry cleaning［J］. Surface Technology, 2021, 50(5): 70-77.

[18] [18] ZHAO H C, QIAO Y L, DU X, et al. Laser cleaning performance and mechanism in stripping of polyacrylate resin paint［J］. Applied Physics A, 2020, 126(5): 1-14.

[19] [19] ZHANG G X, HUA X M, LI F, et al. Effect of laser cleaning process parameters on the surface roughness of 5754-grade aluminum alloy［J］. The International Journal of Advanced Manufacturing Technology, 2019, 105(5/6): 2481-2490.

[20] [20] LIU Y, LIU W J, ZHANG D, et al. Experimental investigations into cleaning mechanism of ship shell plant surface involved in dry laser cleaning by controlling laser power［J］. Applied Physics A, 2020, 126(11): 1-17.

[21] [21] LI L, ZHANG S, HE Q, et al. Application of response surface methodology in experiment design and optimization［J］. Research and Exploration in Laboratory, 2015, 34(8): 41-45.

[22] [22] WANG X B, LI X M, YUE Z, et al. Optimization of laser cutting process parameters for body in white using response surface method［J］. Applied Laser, 2020, 40(6): 1080-1085.

[23] [23] ZHAO C Z, YAN Z H. Optimization of laser cutting silicon steel sheet based on regression orthogonal design［J］. Applied Laser, 2020, 40(5): 873-877.

[24] [24] LIU H Q, LIU J W, GUO K, et al. Characteristics and process parameters optimization of inconel 718 fabricated via laser directed energy deposition［J］. Applied Laser, 2021, 41(1): 13-21.

[25] [25] ZHANG Q, Study on Microporous processing technology of Nickel superalloy based on laser machining combined with high temperature chemical etching［D］. Qingdao : Qingdao University of Technology, 2019.

[26] [26] BOX G E P, WILSON K B. On the experimental attainment of optimum conditions［J］. Journal of the Royal Statistical Society: Series B (Methodological), 1951, 13(1): 1-38.

[27] [27] YANG J N, ZHOU J Z, SUN Q, et al. Laser paint removal process parameter optimization via response surface methodology［J］. Laser & Optoelectronics Progress, 2019, 56(23): 231402.

[28] [28] ZHAO Y C, MAO R P, YUAN X P, et al. Corrosion behaviour of Ti-based bulk metallic glass matrix composites［J］. Journal of Materials Engineering, 2018, 46(1): 25-30.