[1] Devivier C, Tagliaferri V, Trovalusci F et al. Mechanical characterization of open cell aluminium foams reinforced by nickel electro-deposition[J]. Materials & Design, 86, 272-278(2015). http://www.sciencedirect.com/science/article/pii/S0264127515301489

[2] Ganne T, Crépin J, Serror S et al. Cracking behaviour of PVD tungsten coatings deposited on steel substrates[J]. Acta Materialia, 50, 4149-4163(2002). http://www.sciencedirect.com/science/article/pii/S1359645402002562

[3] Liu H, Guo R X, Liu Z. Characteristics of microstructure and performance of laser-treated electroless Ni-P/Ni-W-P duplex coatings[J]. Transactions of Nonferrous Metals Society of China, 22, 3012-3020(2012). http://www.sciencedirect.com/science/article/pii/S1003632611615641

[4] Krishnaveni K, Seshadri S K. Electroless Ni-P/Ni-B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance[J]. Materials Chemistry & Physics, 82, 771-779(2003). http://www.sciencedirect.com/science/article/pii/S0254058403003900

[5] Bonin L, Vitry V. Mechanical and wear characterization of electroless nickel mono and bilayers and high boron-mid phosphorous electroless nickel duplex coatings[J]. Surface & Coatings Technology, 307, 957-962(2016). http://www.sciencedirect.com/science/article/pii/S0257897216310143

[6] Xie Z W, Chen Q, Chen T et al. Microstructure and properties of nitrogen ion implantation/AlN/CrAlN/MoS2-phenolic resin duplex coatings on magnesium alloys[J]. Materials Chemistry & Physics, 160, 212-220(2015). http://www.sciencedirect.com/science/article/pii/S0254058415300274

[7] Vitry V, Sens A, Kanta A F et al. Wear and corrosion resistance of heat treated and as-plated duplex NiP/NiB coatings on 2024 aluminum alloys[J]. Surface & Coatings Technology, 206, 3421-3427(2012). http://www.sciencedirect.com/science/article/pii/S0257897212000655

[8] Tan Caiwang, Gong Xiangtao, Li Liqun et al. Laser welding-brazing characteristics of dissimilar metals Mg/Ti with Al interlayers[J]. Chinese J Lasers, 42, 0103002(2015).

[9] Skulev H, Malinov S, Sha W et al. Microstructural and mechanical properties of nickel-base plasma sprayed coatings on steel and cast iron substrates[J]. Surface & Coatings Technology, 197, 177-184(2005). http://www.sciencedirect.com/science/article/pii/S0257897205001027

[10] Cheng J, Yang J, Zhang X H et al. High temperature tribological behavior of a Ti-46Al-2Cr-2Nb intermetallics[J]. Intermetallics, 31, 120-126(2012). http://www.sciencedirect.com/science/article/pii/S0966979512002427

[11] Weng F, Chen C, Yu H. Research status of laser cladding on titanium and its alloys: a review[J]. Materials & Design, 58, 412-425(2014). http://www.sciencedirect.com/science/article/pii/S0261306914001095

[12] Zhou S F, Zhang T Y, Xiong Z et al. Investigation of Cu-Fe-based coating produced on copper alloy substrate by laser induction hybrid rapid cladding[J]. Optics & Laser Technology, 59, 131-136(2014). http://www.sciencedirect.com/science/article/pii/S0030399213004635

[13] Li J N, Chen C Z, He Q S. Influence of Cu on microstructure and wear resistance of TiC/TiB/TiN reinforced composite coating fabricated by laser cladding[J]. Materials Chemistry & Physics, 133, 741-745(2012). http://www.sciencedirect.com/science/article/pii/S025405841200106X

[14] Diao Y H, Zhang K M. Microstructure and corrosion resistance of TC2 Ti alloy by laser cladding with Ti/TiC/TiB2 powders[J]. Applied Surface Science, 352, 163-168(2015). http://www.sciencedirect.com/science/article/pii/S0169433215008703

[15] Huang Guo, Su Yu, Duan Zhiyu et al. Microstructure of Fe powder on laser-cladded Ti6Al4V alloy[J]. Shanghai Metals, 35, 22-26(2013).

[16] Chen S H, Zhang M X, Huang J H et al. Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel[J]. Materials & Design, 53, 504-511(2014). http://www.sciencedirect.com/science/article/pii/S0261306913006729

[17] Wang T, Zhang B G, Chen G Q et al. High strength electron beam welded titanium-stainless steel joint with V/Cu based composite filler metals[J]. Vacuum, 94, 41-47(2013). http://www.sciencedirect.com/science/article/pii/S0042207X13000286

[18] Tomashchuk I, Grevey D, Sallamand P. Dissimilar laser welding of AISI 316L stainless steel to Ti6-Al4-6V alloy via pure vanadium interlayer[J]. Materials Science & Engineering A, 622, 37-45(2015). http://www.sciencedirect.com/science/article/pii/S0921509314013380

[19] Kundu S, Sam S, Chatterjee S. Interface microstructure and strength properties of Ti-6Al-4V and microduplex stainless steel diffusion bonded joints[J]. Materials & Design, 32, 2997-3003(2011). http://www.sciencedirect.com/science/article/pii/S0261306910007806

[20] Ferrante M, Pigoretti E V. Diffusion bonding of TI-6AL-4V to AISI 316L stainless steel: mechanical resistance and interface microstructure[J]. Journal of Materials Science, 37, 2825-2833(2002). http://link.springer.com/article/10.1023/A%3A1015845822629

[21] Yuan X J, Sheng G M, Qin B et al. Impulse pressuring diffusion bonding of titanium alloy to stainless steel[J]. Materials Characterization, 59, 930-936(2008). http://www.sciencedirect.com/science/article/pii/S1044580307002690

[22] Orhan N, Khan T I. Ero gˇlu M. Diffusion bonding of a microduplex stainless steel to Ti-6Al-4V [J]. Scripta Materialia, 45, 441-446(2001).

[23] Kahraman N, Gülenç B, Findik F. Joining of titanium/stainless steel by explosive welding and effect on interface[J]. Journal of Materials Processing Technology, 169, 127-133(2005). http://www.sciencedirect.com/science/article/pii/S092401360500659X

[24] Zhang Y, Sun D Q, Gu X Y et al. A hybrid joint based on two kinds of bonding mechanisms for titanium alloy and stainless steel by pulsed laser welding[J]. Materials Letters, 185, 152-155(2016). http://www.sciencedirect.com/science/article/pii/S0167577X16314434

[25] Wang Hongyang, Li Quan, Song Gang et al. Laser-arc hybrid welding of titanium alloy and stainless steel with copper interlayer[J]. Chinese J Lasers, 43, 0503002(2016).

[26] Song Yuqiang, Li Shichun, Du Guanghui. Microstructure and forming rule of Ti/Cu diffusion solution zone[J]. Materials Science and Technology, 18, 420-424(2010).

[28] Zhou S F, Lei J B, Xiong Z. et al. Synthesis of Fep/Cu-Cup/Fe duplex composite coatings by laser cladding[J]. Materials & Design, 97, 431-436(2016). http://or.nsfc.gov.cn/handle/00001903-5/408266

[29] [29] Arenas MA,de DamboreneaJ, MedranoA, et al. Corrosion behaviour of rare earth ion-implanted hot-dip galvanised steel[J]. Surface & Coatings Technology, 2002, 158/159: 615-619.

[30] Xia C Q, Zhang Z G, Feng Z H et al. Effect of zirconium content on the microstructure and corrosion behavior of Ti-6Al-4V-xZr alloys[J]. Corrosion Science, 112, 687-695(2016). http://www.sciencedirect.com/science/article/pii/S0010938X16307375