[1] [1] Stainless Steel Bars [M]. POSCO Specialty Steel Co.,Ltd. 18～25 (2006)

[2] [2] C. Tassion, F. Laroudie, M. Pons et al.. Carbide-reinforced coatings on AISI 316Lstainless steel by laser surface alloying [J]. Surface and Coating Technology 76—77 450～455 (1995)

[3] [3] S. Tomida, K. Nakata, S. Saji et al.. Formation of metal matrix composite layer on aluminum alloy with TiC-Cu power by laser surface alloying process [J]. Surface and Coating Technology 142—144 585～589 (2001)

[4] [4] Y. F. Liu, J. S. Mu, X. Y. Xu et al.. Microstructure and dry-sliding wear property of TiC-reinforced composite coating prepared by plasma-transferred arc weld-surfacing process [J]. Material Science and Engineer A 458, 366～370 (2007)

[5] [5] W. Zhang and Z. Liu. Study on microstructure of in-situ synthesis of TiC-Cr7 C3 -Ti-Ni metal-ceramics composite coating [J]. Chinese J. Lasers (in Chinese) 35, 1091～1094 (2008)

[6] [6] Y. S. Tian, C. Z. Chen, L. X. Chen et al.. Microstructure and wear properties of composite coatings produced by laser alloying of Ti-6Al-4V with graphite and silicon mixed powders [J]. Materials Lett. 60, 109～113 (2006)

[7] [7] D. Zeng, C. Xie, Q. Hu et al.. Corrosion resistance enhancement of Ni-resist ductile iron by laser surface alloying [J]. Scripta Mater. 44, 651～657 (2001)

[8] [8] K. H. Lo, F. T. Cheng, C. T. Kwok et al.. Improvement of cavitation erosion resistance of AISI316 stainless steel by laser surface alloying using fine WC powder [J]. Surface and Coatings Technology 165, 258～267 (2003)

[9] [9] Y. Fu and A. W. Batchelor. Laser alloying of aluminum AA6061 with Ni and Cr. Part II. The effect of laser alloying on the fretting wear resistance [J]. Surface and Coatings Technology 102, 119～126 (1998)

[10] [10] Dariush Seyed Salehi. Sensing and control of Nd:YAG laser cladding process [D]. SwinburneUniversity of Technology Melbourne, Australia, 29～30 (2005)

[11] [11] M. Esfandiari and H. Dong. The corrosion and corrosion-wear behavior of plasma nitrided 17-4PH precipitation hardening stainless steel [J]. Surface and Coatings Technology 202, 466～478 (2007)

[12] [12] X. Wang, M. K. Lei, and J. S. Zhang. Surface modification of 316L stainless steel with high-intensity pulsed ion beams [J]. Surface and Coatings Technology 201, 5884～5890 (2007)

[13] [13] Jorge Simo, David Aspinwall, Fawzy El-Menshawy et al.. Surface alloying using PM composite electron materials when electrical discharge texturing hardened AISI D2 [J]. J. Mater. Proc. Technol. 127, 211～216 (2002)

[14] [14] Peter Schaaf. Laser nitriding if metals [J]. Progress in Material Science 47, 1～161 (2002).

[15] [15] Mariana H. Staia, Lewis Brian, Jess Cawley et al.. Chemical vapour deposition of TiN on stainless steel [J]. Surface and Coatings Technology 76, 231～236 (1995).

[16] [16] C. Liu and A. Leyland. Electrochemical impedance spectroscopy of PVC-TiN coatings on mild steel and AISI 316 substrates [J]. Surface and Coatings Technology 76—77, 615～622 (1995).

[17] [17] H. C. Man, S. Zhang, F. T. Cheng et al.. In situ synthesis of TiC reinforce surface MMC on Al6061 by laser surface alloying [J]. Scripta Materialia 46, 229～234 (2002).

[18] [18] C. Tassion, F. Laroudie, M. Pons et al.. Improvement of the wear resistance of 316L stainless steel by laser surface alloying [J]. Surface and Coating Technology 80, 207～210 (1996).