[1] [1] YAN S X, DONG S Y, XU B S, et al. Effect of molten pool convection on pores and elements distribution in the process of laser cladding［J］. Infrared and Laser Engineering, 2014, 43(9): 28322839.

[2] [2] ZHANG D Y, WU R, ZHANG H F, et al. Numerical simulation of temperature field evolution in the process of laser metal deposition［J］. Chinese Journal of Lasers, 2015, 42(5): 503006.

[3] [3] GAN Z T, YU G, HE X L, et al. Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of Cobase alloy on steel［J］. International Journal of Heat and Mass Transfer, 2017, 104: 2838.

[4] [4] ZHANG Q L, HUANG H, TANG Z H, et al. Rolling wear and fatigue damage behavior of laserinduction hybrid quenching on 42CrMo steel［J］. Chinese Journal of Lasers, 2022, 49(8): 0802023.

[5] [5] ZHU L D, WANG S H, PAN H C, et al. Research on remanufacturing strategy for 45 steel gear using H13 steel powder based on laser cladding technology［J］. Journal of Manufacturing Processes, 2020, 49: 344354.

[6] [6] ZHANG B, HE B, WANG H M. Microstructural investigation and mechanical performance of laser cladding repaired bainite steel with AerMet100 steel［J］.Surface Coatings Technology, 2022, 440(6): 1289498.

[7] [7] LUO J Q, ZHU G X, LI J Q, et al. Numerical simulation on temperature field and flow field of molten pool in laser cladding［J］. Surface Technology, 2023, 52(4): 6784.

[8] [8] LI C, YU Z B, GAO J X, et al. Numerical simulation and experimental study of cladding Fe60 on an ASTM 1045 substrate by laser cladding［J］. Surface and Coatings Technology, 2019, 357: 965977.

[9] [9] MEN Z X, LIU J C, ZHOU J, et al. Analysis on forming quality of 316L stainless steel small thinwalled complex parts by selective laser melting［J］. Forging & Stamping Technology, 2020, 45(6): 102107.

[10] [10] WANG S, WANG Z M, QIAN T T, et al. Microstructure control and mechanical behavior of bonding zone of TC4 titanium alloy fabricated by forging/SLM combined manufacturing［J］. New Technology & New Process, 2021(9): 7075.

[11] [11] ZONG X W, ZHANG J, LU B H, et al. Friction and wear performance of different forming surfaces of Ti6Al4V alloy formed by selective laser melting［J］. Rare Metal Materials and Engineering, 2021, 50(6): 21062111.

[13] [13] JIN K N, YANG Z Y, CHEN P, et al. Dynamic solidification process during laser cladding of IN718: Multiphysics model, solute suppressed nucleation and microstructure evolution［J］. International Journal of Heat and Mass Transfer, 2022, 192: 122907.

[14] [14] GUAN Z Z. Handbook of laser processing technology［M］. 2nd ed. China Metrology Publishing House, 2007: 258260.

[15] [15] DING H H, MU X P, ZHU Y, et al. Microstructures and wear properties of hBN/CaF2/Fe based laser claddings on wheel material surface［J］. China Surface Engineering, 2021, 34(4): 139148.

[16] [16] L G S, ZHANG Y M. Fundamentals of engineering materials and forming technology［M］. 2nd ed. Beijing: Higher Education Press, 2011.

[17] [17] GENERAL ADMINISTRATION OF QUALITY SUPERVISION, INSPECTION AND QUARANTINE OF THE PEOPLE′S REPUBLIC OF CHINA, STANDARDIZATION ADMINISTRATION OF THE PEOPLE′S REPUBLIC OF CHINA. Determination of estimating the average grain size of metal: GB/T 6394—2017［S］. Beijing: Standards Press of China, 2017.

[18] [18] THE STATE ADMINISTRATION FOR MARKET REGULATION, STANDARDIZATION ADMINISTRATION OF THE PEOPLE′S REPUBLIC OF CHINA. Hotrolled steel rails for railway: GB/T 2585—2021［S］. Beijing: Standards Press of China, 2021.

[19] [19] GE X L, ZHAO Z X. Engineering materials and their forming foundation［M］. Beijing: Higher Education Press, 2012.

[20] [20] SUN N, FANG Y, ZHANG J Q, et al. Effect of WC12Co addition on microstructure and wear resistance of inconel 625 matrix composites prepared by laser cladding［J］. Chinese Journal of Lasers, 2021, 48(6): 0602106.

[21] [21] LI J P. Study on friction and wear performance of WCCo cemented carbide［D］. Shanghai: Donghua University, 2017.

[22] [22] YU Y, WANG L J, LIU L H, et al. Current research status of field emission performance of carbon nanotubes and their composites［J］. Materials Reports, 2016, 30(5): 125131.

[23] [23] YAO P P, XIONG X, LI S P, et al. Friction and wear behavior and mechanism of Fe and SiO2 in Cubased P/M friction material［J］. Tribology, 2006, 26(5): 478483.