[1] [1] James J, Bryant P, Solomon S, et al. OASIS: Cryogenicallyoptimized resistive Arrays & IRSP subsystems f spacebackground IR simulation[C]Technologies f Synthetic Environments: Hardwarein theLoop Testing XI. Bellingham: SPIEInt Soc Optical Engineering, 2006: 20812.

[2] [2] McHugh S, Franks G, LaVeigne J. Hightemperature MIRAGE XL (LFRA) IRSP system development[C]Infrared Imaging Systems: Design, Analysis, Modeling, Testing XXVIII. Bellingham: SPIEInt Soc Optical Engineering, 2017: 10178.

[3] T G Karayiannis, M M Mahmoud. Flow boiling in microchannels: Fundamentals and applications. Applied Thermal Engineering, 115, 1372-1397(2017).

[4] D Back, K P Drummond, M D Sinanis, et al. Design, fabrication, and characterization of a compact hierarchical manifold microchannel heat sink array for two-phase cooling. IEEE Transactions on Components Packaging and Manufacturing Technology, 9, 1291-1300(2019).

[5] P Smakulski, S Pietrowicz. A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques. Applied Thermal Engineering, 104, 636-646(2016).

[6] Z Y Wu, W Zhang, Z Y Sun, et al. Research progress on the flow boiling heat transfer enhancement in the microchannel. Micronanoelectronic Technology, 56, 126-132(2019).

[7] V V Kuznetsov. Fundamental issues related to flow boiling and two-phase flow patterns in microchannels-experimental challenges and opportunities. Heat Transfer Engineering, 40, 711-724(2019).

[8] R Leena, G Syamkumar, M J Prakash. Experimental and numerical analyses of multiple jets impingement cooling for high-power electronics. IEEE Transactions on Components Packaging and Manufacturing Technology, 8, 210-215(2018).

[9] Jixiang Wang, Yunze Li, Jiaxin Li, et al. A gas-atomized spray cooling system integrated with an ejector loop: Ejector modeling and thermal performance analysis.. Energy Conversion and Management, 180, 106-118(2019).

[10] T Zhang, K F Yan, C Zhang, et al. Effects of pin-finned array and porous surface on two-phase confined jet-impingement cooling. Chemical Industry and Engineering Progress, 38, 4470-4480(2019).

[11] A Izadi, M Siavashi, Qingang Xiong. Impingement jet hydrogen, air and Cu-H₂O nanofluid cooling of a hot surface covered by porous media with non-uniform input jet velocity. International Journal of Hydrogen Energy, 44, 15933-15948(2019).

[12] A A A K Majhool, N M Jasim. Prediction of the initial drop size and velocity distribution in the cold cryogenic spray. International Journal of Heat and Technology, 38, 629-640(2020).

[13] J Lee, I Mudawar. Low-temperature two-phase microchannel cooling for High-Heat-Flux thermal management of defense electronics. IEEE Transactions on Components and Packaging Technologies, 32, 453-465(2009).

[14] T Zhang, S Y Wang, J C Rui, et al. Characteristic of an Ω-shape microchannel heatsink with different working fluid. Chemical Industry and Engineering Progress, 37, 2954-2961(2018).

[15] G D Xia, Y Z Lv, L X Cheng, et al. Experimental study and dynamic simulation of the continuous two-phase instable boiling in multiple parallel microchannels. International Journal of Heat and Mass Transfer, 138, 961-984(2019).

[16] C L Wang, M C Tian. Experimental research on low Reynolds number liquid-liquid two-phase flow and heat transfer characteristics in micro channels. CIESC Journal, 72, 1322-1332(2021).

[17] Z Y Liu, X Y Yao, X Cheng, et al. Experimental study on two-phase boiling in wavy copper microchannels fabricated with ultrafast laser micromachining. Journal of Micromechanics and Microengineering, 30, 065011(2020).

[18] E Rasouli, C Naderi, V Narayanan. Pitch and aspect ratio effects on single-phase heat transfer through microscale pin fin heat sinks. International Journal of Heat and Mass Transfer, 118, 416-428(2018).

[19] E Rasouli, V Narayanan. Single-phase cryogenic flow and heat transfer through microscale pin fin heat sinks. Heat Transfer Engineering, 37, 994-1011(2016).

[20] N R Singh, S Onkar, J Ramkumar. Thermo-hydraulic performance of square micro pin fins under forced convection. International Journal of Heat and Technology, 39, 170-178(2021).

[21] V Saravanan, C K Umesh, D H K Seetharamu. Numerical investigation of pressure drop and heat transfer in pin fin heat sink and micro channel pin fin heat sink. International Journal of Heat and Technology, 36, 267-276(2018).

[22] B Pati, B Sharma, A Palo, et al. Numerical investigation of pin-fin thermal performance for staggered and inline arrays at low Reynolds number. International Journal of Heat and Technology, 36, 697-703(2018).

[23] Y X Zhao, Z C Lai, H T Hu. Flow boiling heat transfer and pressure drop characteristics of R1234 ze(E) in metal foam filled tubes. CIESC Journal, 72, 5074-5081(2021).

[24] J H Ning, Z Y Sun, C X Bao, et al. Theoretical analysis on the cooling performance of high heat flux chip with dry ice. CIESC Journal, 72, 2047-2056(2021).

[25] X Liang, D H Cai, J J Deng, et al. Characteristics of boiling heat transfer and pressure drop of R410 A in 5 mm diameter inner-grooved copper tubes. Journal of Huazhong University of Science and Technology (Natural Science Edition), 47, 1-6(2019).

[26] [26] Wang Z. Research on thermal interface resistance of cryogenic packaging f infrared focal plane assembly[D]. Shanghai: University of Chinese Academy of Sciences (Shanghai Institute of Technical Physics, Chinese Academy of Sciences), 2020.