[1] [1] YAP C Y, CHUA C K, DONG Z L, et al. Review of selective laser melting: Materials and applications［J］. Applied Physics Reviews, 2015, 2(4): 041101.

[4] [4] ZHANG L C, ATTAR H. Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications: A review［J］. Advanced Engineering Materials, 2016, 18(4): 463-475.

[5] [5] ZHANG J L, SONG B, WEI Q S, et al. A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends［J］. Journal of Materials Science & Technology, 2019, 35(2): 270-284.

[6] [6] THIJS L, VERHAEGHE F, CRAEGHS T, et al. A study of the microstructural evolution during selective laser melting of Ti-6Al-4V［J］. Acta Materialia, 2010, 58(9): 3303-3312.

[7] [7] SONG B, DONG S J, ZHANG B C, et al. Effects of processing parameters on microstructure and mechanical property of selective laser melted Ti6Al4V［J］. Materials & Design, 2012, 35: 120-125.

[9] [9] QIU C L, PANWISAWAS C, WARD M, et al. On the role of melt flow into the surface structure and porosity development during selective laser melting［J］. Acta Materialia, 2015, 96: 72-79.

[10] [10] SHI X Z, MA S Y, LIU C M, et al. Performance of high layer thickness in selective laser melting of Ti6Al4V［J］. Materials, 2016, 9(12): 975.

[11] [11] GONG H J, RAFI K, GU H F, et al. Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting［J］. Materials & Design, 2015, 86: 545-554.

[12] [12] SHI X Z, YAN C, FENG W W, et al. Effect of high layer thickness on surface quality and defect behavior of Ti-6Al-4V fabricated by selective laser melting［J］. Optics & Laser Technology, 2020, 132: 106471.

[15] [15] NGUYEN Q B, LUU D N, NAI S M L, et al. The role of powder layer thickness on the quality of SLM printed parts［J］.Archives of Civil and Mechanical Engineering, 2018, 18(3): 948-955.

[21] [21] WEI K W, LYU M, ZENG X Y, et al. Effect of laser remelting on deposition quality, residual stress, microstructure, and mechanical property of selective laser melting processed Ti-5Al-2.5Sn alloy［J］. Materials Characterization, 2019, 150: 67-77.

[23] [23] AHMED T, RACK H J. Phase transformations during cooling in α+β titanium alloys［J］. Materials Science and Engineering: A, 1998, 243(1/2): 206-211.