[1] [1] JOHN SOLOMON I, SEVVEL P, GUNASEKARAN J, et al. A review on additive manufacturing of alloys using laser metal deposition［J］. Materials Today: Proceedings, 2022, 64: 44-50.

[2] [2] NIE X F, HE W F, CAO Z Y, et al. Experimental study and fatigue life prediction on high cycle fatigue performance of laser-peened TC4 titanium alloy［J］. Materials Science and Engineering: A, 2021, 822: 141658.

[3] [3] LONG J, ZHANG L J, ZHUANG M X, et al. Narrow-gap laser welding with beam wobbling and filler wire and microstructural performance of joints of thick TC4 titanium alloy plates［J］. Optics & Laser Technology, 2022, 152: 108089.

[4] [4] PANG X T, XIONG Z H, SUN J H, et al. Enhanced strength-ductility synergy in laser additive manufactured TC4 titanium alloy by grain refinement［J］. Materials Letters, 2022, 326: 132949.

[7] [7] WU D B, LIANG J W, WANG H, et al. Investigative on the remanufacturing process of TC4 blade based on selective laser melting and CNC machining［J］. Journal of Materials Research and Technology, 2022, 21: 450-464.

[8] [8] ZHANG T, XU H, LI Z J, et al. Microstructure and properties of TC4/TNTZO multi-layered composite by direct laser deposition［J］. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 109: 103842.

[10] [10] VRANCKEN B, THIJS L, KRUTH J P, et al. Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties［J］. Journal of Alloys and Compounds, 2012, 541: 177-185.

[11] [11] ZHOU Y, WANG K, SUN Z G, et al. Simultaneous improvement of strength and elongation of laser melting deposited Ti-6Al-4V titanium alloy through three-stage heat treatment［J］. Journal of Materials Processing Technology, 2022, 306: 117607.

[13] [13] KHORASANI A M, GIBSON I, GHADERI A, et al. Investigation on the effect of heat treatment and process parameters on the tensile behaviour of SLM Ti-6Al-4V parts［J］. The International Journal of Advanced Manufacturing Technology, 2019, 101(9): 3183-3197.

[15] [15] HICKS C, SIVASWAMY G, KONKOVA T, et al. Anisotropic tensile properties and failure mechanism of laser metal deposited Ti-5Al-5Mo-5V-3Cr alloy before and after sub-transus heat-treatment［J］. Materials Science and Engineering: A, 2021, 825: 141928.

[16] [16] CHENG F, WANG H M, LI Z, et al. Dynamic compression deformation behavior of laser directed energy deposited α+β duplex titanium alloy with basket-weave morphology［J］. Additive Manufacturing, 2023, 61: 103336.

[17] [17] ZHANG K Z, LEI Z L, CHEN Y B, et al. Heat treatment of laser-additive welded Ti2AlNb joints: Microstructure and tensile properties［J］. Materials Science and Engineering: A, 2019, 744: 436-444.

[18] [18] JIAO X Y, KONG B B, TAO W, et al. Effects of annealing on microstructure and deformation uniformity of Ti-22Al-24Nb-0.5Mo laser-welded joints［J］. Materials & Design, 2017, 130: 166-174.

[20] [20] GONG J Q, WEI K W, LIU M N, et al. Microstructure and mechanical properties of AlSi10Mg alloy built by laser powder bed fusion/direct energy deposition hybrid laser additive manufacturing［J］. Additive Manufacturing, 2022, 59: 103160.

[21] [21] HUO P C, ZHAO Z Y, DU W B, et al. Deformation strengthening mechanism of in situ TiC/TC4 alloy nanocomposites produced by selective laser melting［J］. Composites Part B: Engineering, 2021, 225: 109305.

[22] [22] ZHAO Z, CHEN J, GUO S, et al. Influence of α/β interface phase on the tensile properties of laser cladding deposited Ti-6Al-4V titanium alloy［J］. Journal of Materials Science & Technology, 2017, 33(7): 675-681.

[23] [23] ZHAN Y, LIU C, ZHANG J J, et al. Measurement of residual stress in laser additive manufacturing TC4 titanium alloy with the laser ultrasonic technique［J］. Materials Science and Engineering: A, 2019, 762: 138093.

[24] [24] REN H S, TIAN X J, WANG H M. Effect of heat treatment on microstructure and mechanical properties of a graded structural material［J］. Materials Science and Engineering: A, 2014, 614: 207-213.

[25] [25] COTTAM R, BRANDT M. Laser cladding of Ti-6Al-4V powder on Ti-6Al-4V substrate: Effect of laser cladding parameters on microstructure［J］. Physics Procedia, 2011, 12: 323-329.

[26] [26] ZHOU X, XU D K, GENG S J, et al. Mechanical properties, corrosion behavior and cytotoxicity of Ti-6Al-4V alloy fabricated by laser metal deposition［J］. Materials Characterization, 2021, 179: 111302.

[27] [27] WANG W, WANG D, LI C F, et al. Effect of post heat treatment on microstructure and mechanical properties of Ti-6Al-4V jointing parts proceeded by laser additive manufacturing［J］. Materials Science and Engineering: A, 2020, 788: 139544.

[29] [29] KASPEROVICH G, HAUSMANN J. Improvement of fatigue resistance and ductility of TiAl6V4 processed by selective laser melting［J］. Journal of Materials Processing Technology, 2015, 220: 202-214.