[1] CORMAN G S, LUTHRA K L. Development history of GE's prepreg melt infiltrated ceramic matrix composite material and applications[J]. Comprehensive Composite Materials II, 5, 325(2018).

[2] LEONARD G, STEGMAIER J. Development of an aeroderivative gas turbine dry low emissions combustion system[J]. Journal of Engineering for Gas Turbines and Power, 116(1994).

[3] ZHU D M, HARDER B. The development of HfO₂-rare earth based oxide materials and barrier coatings for thermal protection systems[conf-proc]. Materials Science & Technology 2014 Conference & Exhibition, Pittsburgh(2014).

[5] PADTURE N P. Advanced structural ceramics in aerospace propulsion[J]. Nature Materials, 15, 804(2016).

[6] CLARKE D R, OECHSNER M, PADTURE N P. Thermal-barrier coatings for more efficient gas-turbine engines[J]. MRS Bulletin, 37(2012).

[7] LEE K N, ZHU D M, LIMA R S. Perspectives on environmental barrier coatings (EBCs) manufactured via air plasma spray (APS) on ceramic matrix composites (CMCs): a tutorial paper[J]. Journal of Thermal Spray Technology, 30, 40(2021).

[8] TEJERO-MARTIN D, BENNETT C, HUSSAIN T. A review on environmental barrier coatings: history, current state of the art and future developments[J]. Journal of the European Ceramic Society, 41, 1747(2021).

[14] HERMAN H, SAMPATH S, MCCUNE R. Thermal spray: current status and future trends[J]. MRS Bulletin, 25(2000).

[15] LEE K N. Yb₂Si₂O₇ environmental barrier coatings with reduced bond coat oxidation rates via chemical modifications for long life[J]. Journal of the American Ceramic Society, 102(2019).

[16] RICHARDS B T, YOUNG K A, DE FRANQUEVILLE F et al. Response of ytterbium disilicate-silicon environmental barrier coatings to thermal cycling in water vapor[J]. Acta Materials, 106, 1(2016).

[17] ZHU D M. Advanced environmental barrier coatings for SiC/SiC ceramic matrix composite turbine components//Engineered ceramics: current status and future prospects[J]. Hoboken: John Wiley & Sons(2015).

[18] BAKAN E, SOHN Y J, VASSEN R. Microstructure and phase composition evolution of silicon-hafnia feedstock during plasma spraying and following cyclic oxidation[J]. Acta Materialia, 214, 117007(2021).

[19] LI C, HE J, MA Y et al. Evolution mechanism of the microstructure and mechanical properties of plasma-sprayed yttria-stabilized hafnia thermal barrier coating at 1400 ℃[J]. Ceramics International, 46, 23417(2020).

[20] LI G, LU X R, HUANG J Q et al. Thermal cycling behavior and failure mechanism of the Si-HfO₂ environmental barrier coating bond coats prepared by atmospheric plasma spraying[J]. Journal of Alloys and Compounds, 913, 165319(2022).

[21] ZHANG Z Y, PARK Y J, KIM D H et al. High-temperature oxidation performance of novel environmental barrier coating 50HfO₂-50SiO₂/Y_xYb_(2-x)Si₂O₇ at 1475 ℃[J]. Journal of the European Ceramic Society, 43, 1127(2023).

[22] JACOBSON N S. Corrosion of silicon-based ceramics in combustion environments[J]. Journal of the American Ceramic Society, 76(1993).

[23] OPILA E J. Variation of the oxidation rate of silicon carbide with water-vapor pressure[J]. Journal of the American Ceramic Society, 82(1999).

[24] KLEMM H. Silicon nitride for high-temperature applications[J]. Journal of the American Ceramic Society, 93(2010).

[25] BAKAN E, MARCANO D, ZHOU D P et al. Yb₂Si₂O₇environmental barrier coatings deposited by various thermal spray techniques: a preliminary comparative study[J]. Jouranl of Thermal Spray Technology, 26, 1011(2017).

[26] CHEN D Y, PEGLER A, DWIVEDI G et al. Thermal cycling behavior of air plasma-sprayed and low-pressure plasma-sprayed environmental barrier coatings[J]. Coatings, 11, 868(2021).

[27] DONG Y, REN K, LU Y et al. High-entropy environmental barrier coating for the ceramic matrix composites[J]. Journal of the European Ceramic Society, 39(2019).

[28] SUN L, LUO Y, TIAN Z et al. High temperature corrosion of (Er_0.25Tm_0.25Yb_0.25Lu_0.25)₂Si₂O₇ environmental barrier coating material subjected to water vapor and molten calcium- magnesium-aluminosilicate (CMAS)[J]. Corrosion Science, 175, 108881(2020).

[29] RIDLEY M, OPILA E. Thermochemical stability and microstructural evolution of Yb₂Si₂O₇in high-velocity high-temperature water vapor[J]. Journal of the European Ceramic Society, 41(2020).

[30] TURCER L R, PADTURE N P. Towards multifunctional thermal environmental barrier coatings (TEBCs) based on rare-earth pyrosilicate solid-solution ceramics[J]. Scripta Materialia, 154, 111(2018).

[31] TIAN Z, ZHENG L, LI Z et al. Exploration of the low thermal conductivities of γ-Y₂Si₂O₇, β-Y₂Si₂O₇, β-Yb₂Si₂O₇, and β-Lu₂Si₂O₇ as novel environmental barrier coating candidates[J]. Journal of the European Ceramic Society, 36(2016).

[32] TIAN Z, ZHENG L, WANG J et al. Theoretical and experimental determination of the major thermo-mechanical properties of RE₂SiO₅ (RE=Tb, Dy, Ho, Er, Tm, Yb, Lu, and Y) for environmental and thermal barrier coating applications[J]. Journal of the European Ceramic Society, 36(2016).

[33] VISWANATHAN V, DWIVEDI G, SAMPATH S. Multilayer, multimaterial thermal barrier coating systems: design, synthesis, and performance assessment[J]. Journal of the American Ceramic Society, 98(2015).

[34] GLEDHILL A D, REDDY K M, DREXLER J M et al. Mitigation of damage from molten fly ash to air-plasma-sprayed thermal barrier coatings[J]. Materials Science and Engineering: A, 528(2011).

[35] KRAMER S, YANG J, LEVI C G. Infiltration-inhibiting reaction of gadolinium zirconate thermal barrier coatings with CMAS melts[J]. Journal of the American Ceramic Society, 91(2008).

[36] VARDELLE A, MOREAU C, AKEDO J et al. The 2016 thermal spray roadmap[J]. Journal of Thermal Spray Technology, 25.

[37] LI W, ZHAO H Y, ZHONG X H et al. Air plasma-sprayed yttria and yttria-stabilized zirconia thermal barrier coatings subjected to calcium-magnesium-alumino-silicate (CMAS)[J]. Journal of Thermal Spray Technology, 23(2014).

[38] MECHNICH P, BRAUE W. Air plasma-sprayed Y₂O₃ coatings for Al₂O₃/Al₂O₃ ceramic matrix composites[J]. Journal of the European Ceramic Society, 33, 2645(2013).

[39] AUSSAVY D, BOLOT R, MONTAVON G et al. YSZ-polyester abradable coatings manufactured by APS.[J]. Journal of Thermal Spray Technology, 25(2016).

[40] SPORER D, REFKE A, DRATWINSKI M et al. New high-temperature seal system for increased efficiency of gas turbines[J]. Sealing Technology, 10, 9(2008).

[41] HUANG J Q, LIU R Y, HU Q et al. High temperature abradable sealing coating for SiC_f/SiC ceramic matrix composites[J]. Ceramics International, 49, 1779(2023).

[42] GUO M Q, CUI Y J, WANG C L et al. Design and characterization of BSAS-polyester abradable environmental barrier coatings (A/EBCs) on SiC/SiC composites[J]. Surface & Coatings Technology, 465, 129617(2023).

[43] QIN D D, NIU Y R, LI H et al. Fabrication and characterization of Yb₂Si₂O₇-based composites as novel abradable sealing coatings[J]. Ceramics International, 47, 23153(2021).

[44] STEINKE T, MAUER G, VAΒEN R et al. Process design and monitoring for plasma sprayed abradable coatings[J]. Journal of Thermal Spray Technology, 19, 756(2010).

[45] LIANG J J, MATSUMOTO K, KAWAGISHI K et al. Morphological evolution of thermal barrier coatings with equilibrium (EQ) and NiCoCrAlY bond coats during thermal cycling[J]. Surface & Coatings Technology, 207, 413(2012).