[1] [1] Xia Mujian, Zhang Yu, Zhou Guanghong, et al. Research progress in surface modification of biomedical Ti6Al4V alloy［J］. Corrosion & Protection, 2012, 33(8): 645-647.

[2] [2] Gu Y, Chen L, Yue W, et al. Corrosion behavior and mechanism of MAO coated Ti6Al4V with a grain-fined surface layer［J］. Journal of Alloys & Compounds, 2016, 664: 770-776.

[3] [3] Yu Pengcheng, Liu Xiubo, Lu Xiaolong, et al. Study on tribology and high-temperature oxidation resistance of laser cladding composite coatings on Ti6Al4V alloy［J］. Chinese J Lasers, 2015, 42(10): 1003004.

[4] [4] Kao W H, Su Y L, Horng J H, et al. Improved tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy by gas-nitriding and Ti-C∶H coating［J］. Surface & Coatings Technology, 2015, 283: 70-79.

[5] [5] Malekighaleh H, Hafezi M, Hadipour M, et al. Effect of tricalcium magnesium silicate coating on the electrochemical and biological behavior of Ti-6Al-4V alloys［J］. Plos One, 2015, 10(9): 0138454.

[6] [6] Mohan L, Anandan C, Rajendran N. Electrochemical behaviour and bioactivity of self-organized TiO2 nanotube arrays on Ti-6Al-4V in Hanks′ solution for biomedical applications［J］. Electrochimica Acta, 2015, 155: 411-420.

[7] [7] Mokgalaka M N, Popoola A P I, Pityana S L. In situ laser deposition of NiTi intermetallics for corrosion improvement of Ti-6Al-4V alloy［J］. Transactions of Nonferrous Metals Society of China, 2015, 25(10): 3315-3322.

[8] [8] Guo Y, Sealy M P, Guo C. Significant improvement of corrosion resistance of biodegradable metallic implants processed by laser shock peening［J］. CIRP Annals - Manufacturing Technology, 2012, 61(1): 583-586.

[9] [9] Vinodh K C, Sivakumar N. Effect of high repetition laser shock peening on biocompatibility and corrosion resistance of magnesium［J］. Optics and Laser Technology, 2017, 88: 75-84.

[10] [10] Li Xingcheng, Zhang Yongkang. Effect of laser shock times on electrochemical performance of AZ31 magnesium alloy［J］. Laser Technology, 2015, 39(4): 466-470.

[11] [11] Zhang Qinglai, Qian Yang, An Zhibin, et al. Study on electrochemical corrosion of magnesium alloys by laser shock processing in NaCl solution［J］. Chinese J Lasers, 2014, 41(9): 0903002.

[12] [12] Correa C, Gil-Santos A, Porro J A, et al. Eigenstrain simulation of residual stresses induced by laser shock processing in a Ti6Al4V hip replacement［J］. Materials and Design, 2015, 79: 106-114.

[13] [13] Huang S, Sheng J, Zhou J Z, et al. On the influence of laser peening with different coverage areas on fatigue response and fracture behavior of Ti-6Al-4V alloy［J］. Engineering Fracture Mechanics, 2015, 147: 72-82.

[14] [14] Ren X D, Zhou W F, Liu F F, et al. Microstructure evolution and grain refinement of Ti-6Al-4V alloy by laser shock processing［J］. Applied Surface Science, 2015, 363: 44-49.

[15] [15] Li Shaozhe, Zhang Lingfeng, Xing Qingpu. Effect of laser shock processing on electrochemical corrosion behavior of AZ91 magnesium alloy［J］. Chinese J Lasers, 2013, 40(5): 0503004.

[16] [16] Liu Rongxiang, Zhou Liwen, Yang Yujie, et al. Study on microstructure and corrosion resistance of the Ti6Al4V coating by velocity arc spray［J］. Surface Technology, 2011, 40(1): 14-16.