[1] [1] HON K K B, LI L, HUTCHINGS I M. Direct writing technology-advances and developments［J］. CIRP Annals, 2008, 57(2): 601-620.

[2] [2] ABBEL R, TEUNISSEN P, RUBINGH E, et al. Industrial-scale inkjet printed electronics manufacturing-production up-scaling from concept tools to a roll-to-roll pilot line［J］. Mater Res, 2014, 1(1): 015002.

[3] [3] FINN D J, LOTYA M, COLEMAN J N. Inkjet printing of silver nanowire networks［J］. ACS Appl Mater Interfaces, 2015, 7(17): 9254-9261.

[4] [4] VANOSCH T H J, PERELAER J, DELAAT A W M, et al. Inkjet printing of narrow conductive tracks on untreated polymeric substrates［J］. Adv Mater, 2008, 20(2): 343-345.

[5] [5] BONACCORSO F, BARTOLOTTA A, COLEMAN J N, et al. 2D-crystal-based functional inks［J］. Adv Mater, 2016, 28(29): 6136-6166.

[6] [6] ARNOLD C B, SERRA P, PIQU A. Laser direct-write techniques for printing of complex materials［J］. MRS Bull, 2007, 32(1): 23-32.

[7] [7] DELAPORTE P, ALLONCLE A P. Laser-induced forward transfer: a high resolution additive manufacturing technology［J］. Opt Laser Technol, 2016, 78: 33-41.

[8] [8] BOHANDY J, KIM B F, ADRIAN F J. Metal deposition from a supported metal film using an excimer laser［J］. J Appl Phys, 1986, 60(4): 1538-1539.

[9] [9] PIQU A, KIM H, AUYEUNG R C Y, et al. Laser-induced forward transfer (LIFT) of congruent voxels［J］. Appl Surf Sci, 2016, 374: 42-48.

[10] [10] BERG Y, WINTER S, KOTLER Z, et al. Embedded metal microstructures in glass substrates by a combined laser trenching and printing process［J］. JLMN-Journal of Laser Micro/Nanoengineering, 2018, 13(2): 131-134.

[11] [11] SERRA P, DUOCASTELLA M, FERNNDEZ-PRADAS J M, et al. Liquids microprinting through laser-induced forward transfer［J］. Appl Surf Sci, 2009, 255(10): 5342-5345.

[12] [12] PIQU A, CHRISEY D B, AUYEUNG R C Y, et al. A novel laser transfer process for direct writing of electronic and sensor materials［J］. Appl Phys A: Mater Sci Process, 1999, 69(7): S279-S284.

[13] [13] CHRISEY D B, PIQU A, FITZ-GERALD J, et al. New approach to laser direct writing active and passive mesoscopic circuit elements［J］. Appl Surf Sci, 2000,154-155: 593-600.

[14] [14] BHNISCH R, GRO W, MENSCHIG A. Single-shot, high repetition rate metallic pattern transfer［J］. Microelectron Eng, 2000, 50(1/2/3/4): 541-546.

[15] [15] GRANT-JACOB J A, MILLS B, FEINAEUGLE M, et al. Micron-scale copper wires printed using femtosecond laser-induced forward transfer with automated donor replenishment［J］. Opt Mater Express, 2013, 3(6): 747-754.

[16] [16] BRECKENFELD E, KIM H, AUYEUNG R C Y, et al. Laser induced forward transfer of silver nano paste for microwave interconnects［J］. Appl Surf Sci, 2015, 331: 254-261.

[17] [17] ZERGIOTI I. Laser printing of organic electronics and sensors［J］. J Laser Micro Nanoeng, 2013, 8(1): 30-34.

[18] [18] SOPENA P, SIEIRO J, FERNANDEZ J M, et al. Laser-induced forward transfer: a digital approach for printing devices on regular paper［J］. Adv Mater Technol, 2020, 5(6): 200080.

[19] [19] SANCHEZ-ANIORTE M I, MOUHAMADOU B, ALLONCLE A P, et al. Laser induced forward transfer for improving fine-line metallization in photovoltaic applications［J］. Appl Phys A， 2016, 122(6): 1-5.

[20] [20] ZENOU M, KOTLER Z. Printing of metallic 3D micro-objects by laser induced forward transfer［J］. Opt Express, 2016, 24(2): 1431-1446.

[21] [21] ZENOU M, SA’AR A, KOTLER Z. Laser jetting of femto-liter metal droplets for high resolution 3D printed structures［J］. Sci Rep, 2015, 5(1): 17265.

[24] [24] FERNANDEZ J M, SERRA P. Laser-induced forward transfer: a method for printing functional inks［J］. Crystals, 2020, 651(10): 1-17.

[25] [25] RAPP L, SEREIN-SPIRAU F, LRE-PORTE J P, et al. Laser printing of air-stable high performing organic thin film transistors［J］. Org Electron, 2012, 13(10): 2035-2041.

[26] [26] MAKRYGIANNI M, VERRELLI E, BOUKOS N, et al. Laser printing and characterization of semiconducting polymers for organic electronics［J］. Appl Phys A， 2012, 110 (3): 559-563.

[27] [27] FOGEL O，WINTER S, BENJAMIN E, et al. 3D printing of functional metallic microstructures and its implementation in electrothermal actuators［J］. Addit Manuf, 2018, 21: 307-311.

[28] [28] PERE S, PIQU A. Laser-induced forward transfer fundamentals and applications［J］. Adv Mater Technol, 2018, 4(1): 1800099.

[29] [29] FITZ-GERALD J M, PIQUE A, CHRISEY D B, et al. Laser direct writing of phosphor screens for high-definition displays［J］. Appl Phys Lett, 2000, 76 (11): 1386-1388.

[30] [30] RAPP L, CIBERT C, NENON S, et al. Improvement in semiconductor laser printing using a sacrificial protecting layer for organic thin-film transistors fabrication［J］. Appl Surf Sci, 2011, 257(12): 5245-5249.

[31] [31] FARDEL R, NAGEL M, NESCH F, et al. Fabrication of organic light-emitting diode pixels by laser-assisted forward transfer［J］. Appl Phys Lett, 2007, 91(6): 61103.

[32] [32] LIPPERT T, WOKAUN A, STEBANI J, et al. Triazene polymers designed for excimer laser ablation［J］. Chem, 1993, 206(1): 97-110.

[33] [33] SHAW-STEWART J, CHU B, LIPPERT T, et al. Improved laser-induced forward transfer of organic semiconductor thin films by reducing the environmental pressure and controlling the substrate-substrate gap width［J］. Applied Physics A, 2011, 105(3): 713-722.

[34] [34] CHARIPAR K M, AUYEUNG R C Y, KIM H, et al. Use of an elastomeric donor for LIFT of metal foils［J］. JLMN-Journal of Laser Micro/Nanoengineering, 2018, 13(2): 85-89.

[35] [35] FARDEL R, NAGEL M, NUESCH F, et al. Laser forward transfer using a sacrificial layer: influence of the material properties［J］. Appl Surf Sci, 2007, 254(4): 1322-1326.

[36] [36] XU J, LIU J, CUI D, et al. Laser-assisted forward transfer of multi-spectral nanocrystal quantum dot emitters［J］. Nanotechnology, 2007,18 (2): 025403.

[38] [38] KO S H, PAN H, RYU S G, et al. Nanomaterial enabled laser transfer for organic light emitting material direct writing［J］. Appl Phys Lett, 2008, 93(15): 151110.

[39] [39] TSOUTI V, BOUTOPOULOS C, GOUSTOURIDIS D, et al. A chemical sensor microarray realized by laser printing of polymers［J］. Sens Actuators B Chem, 2010, 150(1): 148-153.

[40] [40] SCHIELE N R, CORR D T, RAOF N A, et al. Laser-based direct write techniques for cell printing［J］. Biofabrication, 2010, 2(3): 32001.

[41] [41] MURPHY S V, ATALA A. 3D bioprinting of tissues and organs［J］. Nat. Biotechnol, 2014, 32(8): 773-785.

[42] [42] GODFREY A T K, KALLEPALLI D L N, RATTE J, et al. Femtosecond-laser-induced nanoscale blisters in polyimide thin films through nonlinear absorption［J］. Phys Rev Appl, 2020, 14: 044057.

[43] [43] CHEN C Y, BARRON J A, RINGEISEN B R. Cell patterning without chemical surface modification: cell-cell interactions between printed bovine aortic endothelial cells (BAEC) on a homogeneous cell-adherent hydrogel［J］. Appl Surf Sci, 2006, 252(24): 8641-8645.

[44] [44] GRUENE M, PFLAUM M, DEIWICK A, et al. Adipogenic differentiation of laser-printed 3D tissue grafts consisting of human adipose-derived stem cells［J］. Biofabrication, 2011, 3(1): 15005.

[45] [45] OTHON C M, WU X, ANDERS J J, et al. Single-cell printing to form three-dimensional lines of olfactory ensheathing cells［J］. Biomed Mater, 2008, 3(3): 34101.

[46] [46] KERIQUEL V, GUILLEMOT F, ARNAULT I, et al. In vivo bioprinting for computer- and robotic-assisted medical intervention: preliminary study in mice［J］. Biofabrication, 2010, 2(1): 14101.

[47] [47] PIQU A, FITZ-GERALD J, CHRISEY D B, et al. Direct writing of electronic materials using a new laser assisted transfer/annealing technique［J］. Proc SPIE, 2000, 3933: 105-112.

[48] [48] KRISTIN M C, NICHOLAS A C, R. AUYEUNG C Y, et al. Low-profile interconnects via Laser-Induced Forward Transfer［J］. JLMN-Journal of Laser Micro/Nanoengineering, 2018, 13(2): 63-67.

[49] [49] DAVID A W, VICENTIU G. Microdroplet deposition by laser-induced forward transfer［J］. Appl Phys Lett, 2005, 86: 244103.

[50] [50] RAPP L, CONSTANTINESCU C, LARMANDE Y, et al. Smart beam shaping for the deposition of solid polymeric material by laser forward transfer［J］. Applied Physics A, 2014, 117(1): 333-339.

[51] [51] BIRNBAUM A J, KIM H, CHARIPAR N A, et al. Laser printing of multi-layered polymer/metal heterostructures for electronic and MEMS devices［J］. Appl Phys A， 2010, 99: 711-716.