[1] Evans A G, Hutchinson J W, Fleck N A et al. The topological design of multifunctional cellular metals[J]. Progress in Materials Science, 46, 309-327(2001).

[2] Fan H L, Yang W. Development of lattice materials with high specific stiffness and strength[J]. Advances in Mechanics, 37, 99-112(2007).

[3] Kaur I, Singh P. State-of-the-art in heat exchanger additive manufacturing[J]. International Journal of Heat and Mass Transfer, 178, 121600(2021).

[4] Zeng S J, Liu G, Li C S et al. Porous structure design and mechanical properties analysis of femoral stem based on selective laser melting[J]. Chinese Journal of Lasers, 49, 0202016(2022).

[5] Qin L Y, Jin Z X, Zhao S et al. Effect of α texture on mechanical behavior of TC4 alloy fabricated by laser deposition manufacturing[J]. Chinese Journal of Lasers, 47, 0102007(2020).

[6] Gu D D, Zhang H M, Chen H Y et al. Laser additive manufacturing of high-performance metallic aerospace components[J]. Chinese Journal of Lasers, 47, 0500002(2020).

[7] Liu W, Li N, Zhou B et al. Progress in additive manufacturing on complex structures and high-performance materials[J]. Journal of Mechanical Engineering, 55, 128-151, 159(2019).

[8] Kapfer S C, Hyde S T, Mecke K et al. Minimal surface scaffold designs for tissue engineering[J]. Biomaterials, 32, 6875-6882(2011).

[9] Melchels F P W, Bertoldi K, Gabbrielli R et al. Mathematically defined tissue engineering scaffold architectures prepared by stereolithography[J]. Biomaterials, 31, 6909-6916(2010).

[10] Giannitelli S M, Accoto D, Trombetta M et al. Current trends in the design of scaffolds for computer-aided tissue engineering[J]. Acta Biomaterialia, 10, 580-594(2014).

[11] Garner E, Kolken H M A, Wang C C L et al. Compatibility in microstructural optimization for additive manufacturing[J]. Additive Manufacturing, 26, 65-75(2019).

[12] Liu F, Mao Z F, Zhang P et al. Functionally graded porous scaffolds in multiple patterns: new design method, physical and mechanical properties[J]. Materials & Design, 160, 849-860(2018).

[13] Maskery I, Aremu A O, Parry L et al. Effective design and simulation of surface-based lattice structures featuring volume fraction and cell type grading[J]. Materials & Design, 155, 220-232(2018).

[14] Afshar M, Anaraki A P, Montazerian H et al. Additive manufacturing and mechanical characterization of graded porosity scaffolds designed based on triply periodic minimal surface architectures[J]. Journal of the Mechanical Behavior of Biomedical Materials, 62, 481-494(2016).

[15] Han C J, Li Y, Wang Q et al. Continuous functionally graded porous titanium scaffolds manufactured by selective laser melting for bone implants[J]. Journal of the Mechanical Behavior of Biomedical Materials, 80, 119-127(2018).

[16] Montazerian H, Davoodi E, Asadi-Eydivand M et al. Porous scaffold internal architecture design based on minimal surfaces: a compromise between permeability and elastic properties[J]. Materials & Design, 126, 98-114(2017).

[17] Yang L, Li Y, Wu S Q et al. Tailorable and predictable mechanical responses of additive manufactured TPMS lattices with graded structures[J]. Materials Science and Engineering: A, 843, 143109(2022).

[18] Liu Z Q, Gong H, Gao J Z et al. Topological design, mechanical responses and mass transport characteristics of high strength-high permeability TPMS-based scaffolds[J]. International Journal of Mechanical Sciences, 217, 107023(2022).

[19] Nguyen-van V, Choudhry N K, Panda B et al. Performance of concrete beam reinforced with 3D printed bioinspired primitive scaffold subjected to three-point bending[J]. Automation in Construction, 134, 104060(2022).

[20] Zhang Z, Jones D, Yue S et al. Hierarchical tailoring of strut architecture to control permeability of additive manufactured titanium implants[J]. Materials Science and Engineering: C, 33, 4055-4062(2013).

[21] Liu F, Zhou T Y, Zhang T et al. Shell offset enhances mechanical and energy absorption properties of SLM-made lattices with controllable separated voids[J]. Materials & Design, 217, 110630(2022).

[22] Johnson G R, Cook W. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures[C], 541-547(1983).

[23] Wang Z Y, Li P F. Characterisation and constitutive model of tensile properties of selective laser melted Ti-6Al-4V struts for microlattice structures[J]. Materials Science and Engineering: A, 725, 350-358(2018).

[24] Zhao M, Zhang D Z, Liu F et al. Mechanical and energy absorption characteristics of additively manufactured functionally graded sheet lattice structures with minimal surfaces[J]. International Journal of Mechanical Sciences, 167, 105262(2020).

[25] Yan C Z, Hao L, Hussein A et al. Evaluations of cellular lattice structures manufactured using selective laser melting[J]. International Journal of Machine Tools and Manufacture, 62, 32-38(2012).

[26] Kelly C N, Francovich J, Julmi S et al. Fatigue behavior of As-built selective laser melted titanium scaffolds with sheet-based gyroid microarchitecture for bone tissue engineering[J]. Acta Biomaterialia, 94, 610-626(2019).

[27] Zhang X Y. Design method and performance study of SLM formed sandwich structures based on triply periodic minimal surfaces[D](2019).