[1] [1] LI X W, LI G, ZHANG M X, et al. Novel approach to additively manufacture high-strength Al alloys by laser powder bed fusion through addition of hybrid grain refiners［J］. Additive Manufacturing, 2021, 48: 102400.

[2] [2] DING H, XIAO Y K, BIAN Z Y, et al. Design, microstructure and thermal stability of a novel heat-resistant Al-Fe-Ni alloy manufactured by selective laser melting［J］. Journal of Alloys and Compounds, 2021, 885: 160949.

[3] [3] CHEN L Y, LIANG S X, LIU Y J, et al. Additive manufacturing of metallic lattice structures: Unconstrained design, accurate fabrication, fascinated performances, and challenges［J］. Materials Science and Engineering: R: Reports, 2021, 146: 100648.

[6] [6] SURYAWANSHI J, PRASHANTH K G, SCUDINO S, et al. Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting［J］. Acta Materialia, 2016, 115: 285-294.

[7] [7] MONTERO-SISTIAGA M L, MERTENS R, VRANCKEN B, et al. Changing the alloy composition of Al7075 for better processability by selective laser melting［J］. Journal of Materials Processing Technology, 2016, 238: 437-445.

[8] [8] CASATI R, LEMKE J N, ALARCON A Z, et al. Aging behavior of high-strength Al alloy 2618 produced by selective laser melting［J］. Metallurgical and Materials Transactions A, 2017, 48(2): 575-579.

[9] [9] LOH L E, CHUA C K, YEONG W Y, et al. Numerical investigation and an effective modelling on the selective laser melting (SLM) process with aluminium alloy 6061［J］. International Journal of Heat and Mass Transfer, 2015, 80: 288-300.

[11] [11] SPIERINGS A B, DAWSON K, DUMITRASCHKEWITZ P, et al. Microstructure characterization of SLM-processed Al-Mg-Sc-Zr alloy in the heat treated and HIPed condition［J］. Additive Manufacturing, 2018, 20: 173-181.

[12] [12] GLERUM J A, KENEL C, SUN T, et al. Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends［J］. Additive Manufacturing, 2020, 36: 101461.

[13] [13] NIE X J, ZHANG H, ZHU H H, et al. Effect of Zr content on formability, microstructure and mechanical properties of selective laser melted Zr modified Al-4.24Cu-1.97Mg-0.56Mn alloys［J］. Journal of Alloys and Compounds, 2018, 764: 977-986.

[19] [19] REN Y, DONG P, ZENG Y, et al. Effect of heat treatment on properties of Al-Mg-Sc-Zr alloy printed by selective laser melting［J］. Applied Surface Science, 2022, 574: 151471.

[20] [20] ZHOU S Y, SU Y, WANG H, et al. Selective laser melting additive manufacturing of 7xxx series Al-Zn-Mg-Cu alloy: Cracking elimination by co-incorporation of Si and TiB2［J］. Additive Manufacturing, 2020, 36: 101458.

[21] [21] ZHANG B C, DEMBINSKI L, CODDET C. The study of the laser parameters and environment variables effect on mechanical properties of high compact parts elaborated by selective laser melting 316L powder［J］. Materials Science and Engineering: A, 2013, 584: 21-31.

[22] [22] ZHANG B C, FENINECHE N E, LIAO H L, et al. Microstructure and magnetic properties of Fe-Ni alloy fabricated by selective laser melting Fe/Ni mixed powders［J］. Journal of Materials Science & Technology, 2013, 29(8): 757-760.

[25] [25] ZHANG Y M, HUANG W B. Comparisons of 304 austenitic stainless steel manufactured by laser metal deposition and selective laser melting［J］. Journal of Manufacturing Processes, 2020, 57: 324-333.