[1] Jiang B, Huang R S, Li L L et al. Study on 10 kW fiber laser welding process[J]. Electric Welding Machine, 51, 8-14(2021).

[2] Zhang G L, Kong H, Zou J L et al. Spatter characteristics of high-power fibre laser deep penetration welding and effect of defocus on spatter[J]. Chinese Journal of Lasers, 48, 2202008(2021).

[3] Zhang M J, Zhang Z, Tang K et al. Analysis of mechanisms of underfill in full penetration laser welding of thick stainless steel with a 10 kW fiber laser[J]. Optics & Laser Technology, 98, 97-105(2018).

[4] Li Y J, Li J N, Gao H B[M]. Laser welding cutting cladding technology(2019).

[5] Chen W Z[M]. Quality control of laser welding and cutting(2010).

[6] Zhao Z J, Zhu B Q, Zou J L et al. Analysis of formation law of keyhole porosity during fiber laser‐TIG hybrid welding[J]. Chinese Journal of Lasers, 50, 1202102(2023).

[7] Kong H, Zhao Z J, Zou J L et al. The influence of laser-induced plume in the keyhole on the welding process[J]. Transactions of the China Welding Institution, 44, 20-26(2023).

[8] Tenner F, Brock C, Klämpfl F et al. Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometry[J]. Optics and Lasers in Engineering, 64, 32-41(2015).

[9] Arita T, Sato Y, Kurita Y et al. In situ observation of dynamics of keyhole and molten pool in laser welding for development of spatter suppression[J]. Journal of Laser Applications, 34, 032017(2022).

[10] Zou J L, Li F, Niu J Q et al. Effect of laser-induced plume on welding process during high power fiber laser welding[J]. Chinese Journal of Lasers, 41, 0603005(2014).

[11] Yang L J, Xie Y, Jia C P et al. Plasma plume eruption during laser deep-penetration welding of TC4 titanium alloy[J]. Journal of Tianjin University (Science and Technology), 57, 967-973(2024).

[12] Jiang P Z, Dong H, Gao M Y et al. Effects of laser power modulation on weld penetration and pore of AZ31 magnesium alloy[J]. Chinese Journal of Lasers, 50, 1202103(2023).

[13] Yuan L W, Liu W C, Gao Y G et al. Study on laser butt welding technology of TP316H stainless steel tubes[J]. Pressure Vessel Technology, 39, 16-21, 38(2022).

[14] Zhang C, Li G, Gao M et al. Microstructure and mechanical properties of narrow gap laser-arc hybrid welded 40 mm thick mild steel[J]. Materials, 10, 106(2017).

[15] Zou J L, Yang W X, Wu S K et al. Effect of plume on weld penetration during high-power fiber laser welding[J]. Journal of Laser Applications, 28, 022003(2016).

[16] Dong Z H, Tian Y, Zhang L et al. Research status of high efficiency deep penetration welding of medium-thick plate titanium alloy: a review[J]. Defence Technology, 45, 178-202(2025).

[17] Han X, Zhao Y, Zou J L et al. Analysis of plume formation reasons in laser deep penetration welding based on visual observation[J]. Chinese Journal of Lasers, 47, 0602004(2020).

[18] Zhao L, Tsukamoto S, Arakane G et al. Prevention of porosity by oxygen addition in fibre laser and fibre laser-GMA hybrid welding[J]. Science and Technology of Welding and Joining, 19, 91-97(2014).

[19] Schmidt L, Schricker K, Bergmann J P et al. Effect of local gas flow in full penetration laser beam welding with high welding speeds[J]. Applied Sciences, 10, 1867(2020).

[20] Kong H, Yang W X, Zou J L et al. Influence of flow direction of high-speed shielding gas on plume in fiber laser deep penetration welding[J]. Transactions of the China Welding Institution, 44, 14-20(2023).

[21] Jia C P, Huang Y M, Zhao S B et al. Plasma plume thermodynamic behavior during laser deep-penetration welding of TC4 titanium alloy[J]. Chinese Journal of Lasers, 50, 2002105(2023).

[22] Yang J, Luo S C, Pei P F et al. Mechanism of pore formation of laser overlapped joint of A356/6082 dissimilar aluminum alloy[J]. Chinese Journal of Lasers, 51, 2402108(2024).

[23] Yang J W, Li T, Li Z et al. Effect of welding speed on the Thermal cycle and Microstructure of During Laser welding of 2205 stainless steel[J]. Applied Laser, 44, 52-58(2024).

[24] Zhang J X, Li X T, Wang J. Laser wobble welding process of SUS316 stainless steel[J]. Applied Laser, 42, 24-32(2022).

[25] Dong J F, Yang F Y, Wu D et al. Spatter suppression mechanism and process optimization of adjustable ring-mode laser welding[J]. Chinese Journal of Lasers, 51, 1202104(2024).

[26] Li M, Rong Y M, Wang L et al. Study on microstructure and mechanical properties of laser welded joints for ultra-high strength steel 1700MS[J]. Laser & Optoelectronics Progress, 60, 1714004(2023).

[27] Liu S C, Wang S L, Zhang Y M et al. Effect of welding speed on microstructure and properties of laser-welded joint of TA15 titanium alloy[J]. Chinese Journal of Lasers, 51, 2002103(2024).