[1] Jauregui C, Limpert J, Tünnermann A. High-power fibre lasers[J]. Nature Photonics, 7, 861-867(2013).

[2] Zervas M N, Codemard C A. High power fiber lasers: a review[J]. IEEE Journal of Selected Topics in Quantum Electronics, 20, 219-241(2014).

[3] Limpert J, Stutzki F, Jansen F et al. Yb-doped large-pitch fibres: effective single-mode operation based on higher-order mode delocalisation[J]. Light: Science & Applications, 1, e8(2012).

[4] Hu M, Quan Z, Wang J H et al. Stimulated Brillouin scattering threshold dependent on temporal characteristics in a kilowatt-peak-power, single-frequency nanosecond pulsed fiber amplifier[J]. Chinese Optics Letters, 14, 031403(2016). http://www.opticsjournal.net/Articles/Abstract?aid=OJ1603070000210GcIfL

[5] Koponen J, Söderlund M, Hoffman H J et al. Photodarkening measurements in large mode area fibers[J]. Proceedings of SPIE, 6453, 64531E(2007).

[6] Jetschke S, Unger S, Schwuchow A et al. Efficient Yb laser fibers with low photodarkening by optimization of the core composition[J]. Optics Express, 16, 15540-15545(2008).

[7] Eidam T, Wirth C, Jauregui C et al. Experimental observations of the threshold-like onset of mode instabilities in high power fiber amplifiers[J]. Optics Express, 19, 13218-13224(2011).

[8] Tao R M, Ma P F, Wang X L et al. 1.3 kW monolithic linearly polarized single-mode master oscillator power amplifier and strategies for mitigating mode instabilities[J]. Photonics Research, 3, 86-93(2015). http://www.opticsjournal.net/Articles/Abstract?aid=OJ160106000194rXu1w4

[9] Petit V, Tumminelli R P, Minelly J D et al. Extremely low NA Yb doped preforms (<0.03) fabricated by MCVD[J]. Proceedings of SPIE, 9728, 97282R(2016).

[10] Jauregui C, Otto H J, Modsching N et al. Recent progress in the understanding of mode instabilities[J]. Proceedings of SPIE, 9344, 93440J(2015).

[11] Ma X Q, Zhu C, Hu I N et al. Single-mode chirally-coupled-core fibers with larger than 50 μm diameter cores[J]. Optics Express, 22, 9206-9219(2014).

[12] Gu G C, Kong F T, Hawkins T et al. Ytterbium-doped large-mode-area all-solid photonic bandgap fiber lasers[J]. Optics Express, 22, 13962-13968(2014).

[13] Jain D, Jung Y, Nunez-Velazquez M et al. Extending single mode performance of all-solid large-mode-area single trench fiber[J]. Optics Express, 22, 31078-31091(2014).

[14] Stutzki F, Jansen F, Liem A et al. 26 mJ, 130 W Q-switched fiber-laser system with near-diffraction-limited beam quality[J]. Optics Letters, 37, 1073-1075(2012).

[15] Brooks C D, di Teodoro F. Multimegawatt peak-power, single-transverse-mode operation of a 100 μm core diameter, Yb-doped rodlike photonic crystal fiber amplifier[J]. Applied Physics Letters, 89, 111119(2006).

[16] Jain D, Jung Y M, Barua P et al. Demonstration of ultra-low NA rare-earth doped step index fiber for applications in high power fiber lasers[J]. Optics Express, 23, 7407-7415(2015).

[17] Beier F, Hupel C, Kuhn S et al. Single mode 4.3 kW output power from a diode-pumped Yb-doped fiber amplifier[J]. Optics Express, 25, 14892-14899(2017).

[18] Peng K, Zhan H, Ni L et al. Single-mode large-mode-area laser fiber with ultralow numerical aperture and high beam quality[J]. Applied Optics, 55, 10133-10137(2016).

[19] Kong F T, Dunn C, Parsons J et al. Large-mode-area fibers operating near single-mode regime[J]. Optics Express, 24, 10295-10301(2016).

[20] Xu W B, Lin Z Q, Wang M et al. 50 μm core diameter Yb 3+/Al 3+/F - codoped silica fiber with M2<1.1 beam quality [J]. Optics Letters, 41, 504-507(2016).

[21] Likhachev M E, Aleshkina S S, Shubin A V et al. Large-mode-area highly Yb-doped photodarkening-free Al2O3-P2O5-SiO2-based fiber. [C]∥CLEO/Europe and EQEC 2011 Conference Digest, May 22-26, 2011, Munich, Germany. Washington, D.C.: OSA, CJ_P24(2011).

[22] Liu S J, Li H Y, Tang Y X et al. Fabrication and spectroscopic properties of Yb 3+-doped silica glasses using the sol-gel method [J]. Chinese Optics Letters, 10, 081601(2012). http://www.opticsjournal.net/Articles/Abstract?aid=OJ1204180000293y6B9E

[23] Liu S J. Investigation on fabrication and spectroscopic properties of Yb 3+-doped silica glass and PCF fiber by sol-gel method [D]. Shanghai: University of Chinese Academy of Sciences(2012).

[24] Wang S K. Study on fabrication of Yb 3+-doped silica glass and its large mode area photonic crystal fiber by sol-gel method [D]. Shanghai: University of Chinese Academy of Sciences(2014).

[25] Lou F G. Study on fabrication of Yb 3+, Tm 3+-doped silica glass core rod and its large mode area fiber prepared by sol-gel method [D]. Shanghai: University of Chinese Academy of Sciences(2014).

[26] Xu W B. Study on performance of Yb 3+-doped silica glass and its large mode area fiber prepared by sol-gel method combing powder sintering [D]. Shanghai: University of Chinese Academy of Sciences(2017).

[27] Hu L L, Wang S K, Lou F Get al. The preparation method of Yb-doped silica fiber core rode: 201310294400. -10-30(2013).

[28] Wang S, Lou F, Yu C et al. Influence of Al 3+ and P 5+ ion contents on the valence state of Yb 3+ ions and the dispersion effect of Al 3+ and P 5+ ions on Yb 3+ ions in silica glass [J]. Journal of Materials Chemistry C, 22, 4406-4414(2014).

[29] Xu W B, Ren J J, Shao C Y et al. Effect of P 5+ on spectroscopy and structure of Yb 3+/Al 3+/P 5+ co-doped silica glass [J]. Journal of Luminescence, 167, 8-15(2015).

[30] Xu W B, Yu C L, Wang S K et al. Effects of F - on the optical and spectroscopic properties of Yb 3+/Al 3+-co-doped silica glass [J]. Optical Materials, 42, 245-250(2015).

[31] Wang F, Shao C Y, Yu C L et al. Effect of AlPO4 join concentration on optical properties and radiation hardening performance of Yb-doped Al2O3-P2O5-SiO2 glass[J]. Journal of Applied Physics, 125, 173104(2019).

[32] Keck D, Schultz P. -06-05[2019-05-01]. https:∥patents.google.com/patent/US3737292.(1973).

[33] Webb A S, Boyland A J, Standish R J et al. MCVD in situ solution doping process for the fabrication of complex design large core rare-earth doped fibers[J]. Journal of Non-Crystalline Solids, 356, 848-851(2010).

[34] Lenardic B, Kveder M. Advanced vapor-phase doping method using chelate precursor for fabrication of rare earth-doped fibers. [C]∥Optical Fiber Communication Conference and National Fiber Optic Engineers Conference, March 22-26, 2009, San Diego, California, United States. Washington, D.C.: OSA, OThK6(2009).

[35] Tammela S, Kiiveri P, Sarkilahti S et al. Direct nanoparticle deposition process for manufacturing very short high gain Er-doped silica glass fibers. [C]∥2002 28TH European Conference on Optical Communication, September 8-12, 2002, Copenhagen, Denmark. New York: IEEE, 9084348(2002).

[36] Leich M, Just F, Langner A et al. Highly efficient Yb-doped silica fibers prepared by powder sinter technology[J]. Optics Letters, 36, 1557-1559(2011).

[37] Benoit A, Dauliat R, Schuster K et al. Optical fiber microstructuration for strengthening single-mode laser operation in high power regime[J]. Optical Engineering, 53, 071817(2014).

[38] Langner A, Schotz G, Such M et al. A new material for high-power laser fibers[J]. Proceedings of SPIE, 6873, 687311(2008).

[39] Langner A, Such M, Schotz G et al. Design evolution, long term performance and application tests of extra large mode area (XLMA) fiber lasers[J]. Proceedings of SPIE, 8601, 86010G(2013).

[40] Zhang W, Liu J T, Zhou G Y et al. Optical properties of the Yb/Er co-doped silica glass prepared by laser sintering technology[J]. Optical Materials Express, 7, 1708-1715(2017).

[41] Chen Y, Zhao N, Liu J T et al. Yb 3+-doped large-mode-area photonic crystal fiber for fiber lasers prepared by laser sintering technology [J]. Optical Materials Express, 9, 1356-1364(2019).

[42] Liu S, Wang M, Zhou Q L et al. Ytterbium-doped silica photonic crystal fiber laser fabricated by the nanoporous glass sintering technique[J]. Laser Physics, 24, 065801(2014).

[43] Yang K, Zheng S P, Jiang X B et al. Luminescence and scintillation of high silica glass containing SnO[J]. Materials Letters, 204, 5-7(2017).

[44] Chu Y B, Ma Y X, Yang Y et al. Yb 3+-doped large core silica fiber for fiber laser prepared by glass phase-separation technology [J]. Optics Letters, 41, 1225-1228(2016).

[45] Chu Y B, Yang Y, Hu X W et al. Yb 3+ heavily doped photonic crystal fiber lasers prepared by the glass phase-separation technology [J]. Optics Express, 25, 24061-24067(2017).

[46] Pedrazza U, Romano V, Lüthy W. Yb 3+∶ Al 3+∶ sol-gel silica glass fiber laser [J]. Optical Materials, 29, 905-907(2007).

[47] El Hamzaoui H, Courthéoux L, Nguyen V N et al. From porous silica xerogels to bulk optical glasses: the control of densification[J]. Materials Chemistry and Physics, 121, 83-88(2010).

[48] Baz A, El Hamzaoui H, Fsaifes I et al. A pure silica ytterbium-doped sol-gel-based fiber laser[J]. Laser Physics Letters, 10, 055106(2013).

[49] El Hamzaoui H, Bouwmans G, Cassez A et al. F/Yb-codoped sol-gel silica glasses: toward tailoring the refractive index for the achievement of high-power fiber lasers[J]. Optics Letters, 42, 1408-1411(2017).

[50] Li Y G, Huang J P, Li Y F et al. Optical properties and laser output of heavily Yb-doped fiber prepared by sol-gel method and DC-RTA technique[J]. Journal of Lightwave Technology, 26, 3256-3260(2008).

[51] Wang M, Wang F, Feng S et al. 272 W quasi single-mode picosecond pulse laser of ytterbium-doped large-mode-area photonic crystal fiber[J]. Chinese Optics Letters, 17, 071401(2019). http://www.opticsjournal.net/Articles/Abstract?aid=OJ52258aecd6094089

[52] Wang S K, Li Z L, Yu C L et al. Fabrication and laser behaviors of Yb 3+ doped silica large mode area photonic crystal fiber prepared by sol-gel method [J]. Optical Materials, 35, 1752-1755(2013).

[53] Wang S K, Feng S Y, Wang M et al. Optical and laser properties of Yb 3+-doped Al2O3-P2O5-SiO2 large-mode-area photonic crystal fiber prepared by the sol-gel method [J]. Laser Physics Letters, 10, 115802(2013).

[54] Xu W B, Wang M, Feng S Y et al. Fabrication and laser amplification behavior of Yb 3+/Al 3+ co-doped photonic crystal fiber [J]. IEEE Photonics Technology Letters, 28, 391-393(2016).

[55] Wang F, Hu L, Xu W et al. Manipulating refractive index, homogeneity and spectroscopy of Yb 3+-doped silica-core glass towards high-power large mode area photonic crystal fiber lasers [J]. Optics Express, 25, 25960-25969(2017).

[56] Wang F, Wang M, Feng S Y et al. Large-mode-area photonic crystal fiber towards pulse laser amplification based on YbAl/P/F codoped silica glass. [C]∥Advanced Solid State Lasers 2018, November 4-8, 2018, Boston, Massachusetts, United States. Washington, D.C.: OSA, ATh1A, 5(2018).

[57] Wang S K, Xu W B, Lou F G et al. Spectroscopic and laser properties of Al-P co-doped Yb silica fiber core-glass rod and large mode area fiber prepared by sol-gel method[J]. Optical Materials Express, 6, 69-78(2016).

[58] Lin Z Q, Lou F G, Wang M et al. A diffraction-limited laser of 25/400 Yb 3+/Al 3+/P 5+/F - silica fiber with a zigzag refractive index profile [J]. Laser physics, 27, 085106(2017).

[59] Wang S K, Xu W B, Wang F et al. Yb 3+-doped silica glass rod with high optical quality and low optical attenuation prepared by modified sol-gel technology for large mode area fiber [J]. Optical Materials Express, 7, 2012-2022(2017).

[60] Wang M, Wang F, Yu C L et al. Ultra-low core numerical aperture large mode area photonic crystal fiber with 1 MW peak power output[J]. Acta Optica Sinica, 39, 0536001(2019).

[61] Kosinski S G, Krol D M, Duncan T M et al. Raman and NMR spectroscopy of SiO2 glasses co-doped with Al2O3 and P2O5[J]. Journal of Non-Crystalline Solids, 105, 45-52(1988).